Effect of Ba deoxidation on oxygen content in NiTi alloys and non-metallic inclusions
Source abstract
Abstract
The effect of Ba deoxidation on the oxygen content and non-metallic inclusions in NiTi alloys was investigated. The NiTi alloy melt was held in a CaO crucible at 1673 K under Ar gas flow for 0–600 s. Metallic Ba (0.5–1.5 mass% with respect to NiTi alloy melt) was added to the melt. After melting, oxygen content of 710 and 330 mass ppm decreased to 210 and 130 mass ppm, respectively, after a holding time of 300 s after the addition of Ba. The oxygen in the melts was reduced to as low as 64 mass ppm after a second Ba deoxidation. The non-metallic inclusions observed in the NiTi alloys were the Ti4Ni2O X and Ti(C,N,O) X types. Decreased oxygen content through Ba deoxidation caused a change in the main phase of the non-metallic inclusions from the Ti4Ni2O X type to the Ti(C,N,O) X type, and a decrease in the area percents of the non-metallic inclusions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Otsuka K, Ren X (2005) Prog Mater Sci 50:51110.1016/j.pmatsci.2004.10.001 ↗
2. Pelton AR, Russell SM, DiCello J (2003) JOM 55(5):3310.1007/s11837-003-0243-3 ↗
3. Morgan N, Wick A, DiCello J, Graham R (2008) In: Berg B, Mitchell MR, Proft J (eds) SMST-2006, Proceedings of the international conference on shape memory and superelastic technologies. ASM International, Materials Park, p 821
4. Shabalovskaya S, Anderegg J, Van Humbeeck J (2008) Acta Biomater 4:44710.1016/j.actbio.2008.01.013 ↗
5. Shugo Y, Yamauchi K, Miyagawa R, Honma T (1982) Bull React Inst Mineral Dress Metall 38:11
6. Shugo Y, Hanada S, Honma T (1985) Bull Rea Inst Mineral Dress Metall 41:23
7. Toro A, Zhou F, Wu MH, Geertruyden WV, Misiolek WZ (2009) J Mater Eng Perform 18:44810.1007/s11665-009-9410-1 ↗
8. Olier P, Barcelo F, Bechade JL, Brachet JC, Lefevre E, Guenin G (1997) J Phys IV France 7:14310.1051/jp4:1997522 ↗
9. Chen F, Tong YX, Lu XL, Wang X, Tian B, Li L, Zheng YF, Chung CY, Ma LW (2011) Mater Lett 65:107310.1016/j.matlet.2011.01.027 ↗
10. Otubo J, Rigo OD, Neto CM, Kaufman MJ, Mei PR (2003) J Phys IV France 112:87310.1051/jp4:20031020 ↗
11. Otubo J, Rigo OD, Moura Neto C, Mei PR (2006) Mater Sci Eng A 438–440:67910.1016/j.msea.2006.02.171 ↗
12. Otubo J, Rigo OD, Coelho AA, Neto CM, Mei PR (2008) Mater Sci Eng A 481–482:63910.1016/j.msea.2007.02.137 ↗
13. Sadrnezhaad SK, Ahmadi E, Malekzadeh M (2009) Mater Sci Technol 25:69910.1179/174328408X317075 ↗
14. de Araújo CJ, da Silva NJ, da Silva MM, Gonzalez CH (2011) Mater Design 32:492510.1016/j.matdes.2011.05.051 ↗
15. Mentz J, Frenzel J, Wagner MF-X, Neuking K, Eggeler G, Buchkremer HP, Stöver D (2008) Mater Sci Eng A 491:27010.1016/j.msea.2008.01.084 ↗
16. Krone L, Schüller E, Bram M, Hamed O, Buchkremer H-P, Stöver D (2004) Mater Sci Eng A 378:18510.1016/j.msea.2003.10.345 ↗
17. Whitney M, Corbin SF, Gorbet RB (2008) Acta Mater 56:55910.1016/j.actamat.2007.10.012 ↗
18. Zhang Z, Frenzel J, Neuking K, Eggeler G (2006) Mater Trans 47:66110.2320/matertrans.47.661 ↗
19. Zhang Z, Frenzel J, Somsen C, Pesicka J, Neuking K, Eggeler G (2006) Mater Sci Eng A 438–440:87910.1016/j.msea.2006.02.161 ↗
20. Frenzel J, Neuking K, Eggeler G (2004) Mat-wiss u Werkstofftech 35:35210.1002/mawe.200400725 ↗
21. Nayan N, Govind, Saikrishna CN, Ramaiah KV, Bhaumik SK, Nair KS, Mittal MC (2007) Mater Sci Eng A 465:4410.1016/j.msea.2007.04.039 ↗
22. Rigo OD, Otubo J, Neto CM, Mei PR (2005) J Mater Process Technol 162–163:11610.1016/j.jmatprotec.2005.02.177 ↗
23. Frenzel J, Zhang Z, Neuking K, Eggeler G (2004) J Alloys Compd 385:21410.1016/j.jallcom.2004.05.002 ↗
24. Zhang Z, Frenzel J, Neuking K, Eggeler G (2005) Acta Mater 53:397110.1016/j.actamat.2005.05.004 ↗
25. Frenzel J, Zhang Z, Somsen Ch, Neuking K, Eggeler G (2007) Acta Mater 55:133110.1016/j.actamat.2006.10.006 ↗
26. ASTMF 2063–05 (2008) In: Bailey SJ, Baldini NC (eds) Annual book of ASTM standards, vol 13.01. ASTM International, West Conshohocken, p 1057
27. Frenzel J, George EP, Dlouhy A, Somsen Ch, Wagner MF-X, Eggeler G (2010) Acta Mater 58:344410.1016/j.actamat.2010.02.019 ↗
28. Sawaguchi T, Kausträter G, Yawny A, Wagner M, Eggeler G (2003) Metall Mater Trans A 34A:284710.1007/s11661-003-0186-x ↗
29. Frotscher M, Burow J, Schön P, Neuking K, Böckmann R, Eggeler G (2009) Mat-wiss u Werkstofftech 40:1710.1002/mawe.200800379 ↗
30. Frotscher M, Nörtershäuser P, Somsen Ch, Neuking K, Böckmann R, Eggeler G (2009) Mater Sci Eng A 503:9610.1016/j.msea.2008.02.059 ↗
31. Frotscher M, Neuking K, Böckmann R, Wolff K-D, Eggeler G (2008) Mater Sci Eng A 481–482:16010.1016/j.msea.2007.04.129 ↗
32. Liang C, Huang N (2009) J Biomed Mater Res 89A:26610.1002/jbm.a.32062 ↗
33. Miyamoto S, Watanabe M, Narushima T, Iguchi Y (2008) Mater Trans 49:28910.2320/matertrans.MRA2007219 ↗
34. Kurosawa F (1999) Zairyo-to-Kankyo 48:40510.3323/jcorr1991.48.405 ↗