journal article·2011-09

Influence of humidity on the scratch behavior of polystyrene–acrylonitrile random copolymers

Robert Browning, Rolf Minkwitz, Piyada Charoensirisomboon, Hung-Jue Sue

Journal of Materials Science· Volume 46· Issue 17
Publisher page

Abstract

The effect of exposure to a humid environment on the scratch behavior of a set of model polystyrene–acrylonitrile (SAN) random copolymers was investigated over a period of 10 days. Linear increasing load scratch tests were performed according to ASTM D7027/ISO 19252. The critical loads for the onset of key scratch deformation mechanisms like periodic micro-cracking, plowing, and scratch visibility were used as metrics for evaluating scratch resistance. The scratching coefficient of friction was evaluated, as well. It was found that, in general, the scratch resistance decreases during the first few days of moisture exposure, but then experiences a degree of recovery upon saturation. It is proposed that the initially absorbed moisture causes plasticization, making the surface weaker until saturation where the water molecules gather together on the surface to impart a degree of lubrication and consequently improve the scratch resistance. Implications of moisture absorption on the scratch behavior of polymers will be discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Timoteo GAV, Fechine GJM, Rabello MS (2008) Polym Eng Sci 48:200310.1002/pen.21067 ↗
2. Sousa AR, Amorim KLE, Medeiros ES, Melo TJA, Rabello MS (2006) Polym Degrad Stab 91:150410.1016/j.polymdegradstab.2005.10.002 ↗
3. Nakamura H, Nakamura T, Noguchi T, Imagawa K (2006) Polym Degrad Stab 91:74010.1016/j.polymdegradstab.2005.06.003 ↗
4. Jiang H, Browning R, Liu P, Chang TA, Sue H-J (2010) J Coat Technol 8:25510.1007/s11998-010-9296-8 ↗
5. Rabek JF (1995) Polymer photodegradation: mechanisms and experimental methods. Chapman and Hall, London10.1007/978-94-011-1274-1 ↗
6. Brostow W, Deborde J-L, Jaklewicz M, Olszynski P (2003) J Mater Ed 25:119
7. Brostow W, Kovacevic V, Vrsaljko D, Whitworth J (2010) J Mater Ed 32:273
8. Myshkin NK, Petrokovets MI, Kovalev AV (2005) Tribol Int 38:91010.1016/j.triboint.2005.07.016 ↗
9. Hainsworth SV, Kilgallon PJ (2008) Prog Org Coat 62:2110.1016/j.porgcoat.2007.09.006 ↗
10. Starczewski L, Szumniak J (1998) Surf Coat Technol 100:3310.1016/S0257-8972(97)00680-4 ↗
11. van der Heide E, Lossie CM, van Bommel KJC, Reinders SAF, Lenting HBM (2010) Tribol Trans 53:84210.1080/10402004.2010.496068 ↗
12. Cinquin J, Abjean P (1993) Int SAMPE Symp Exhib 1539
13. Biney PO, Zhong Y, Zhou J (1998) Int SAMPE Symp Exhib 43:120
14. Wilenski M (1997) PhD Thesis, Michigan State University
15. Li Y, Miranda J, Sue H-J (2001) Polymer 42:779110.1016/S0032-3861(01)00241-5 ↗
16. Li Y, Miranda J, Sue H-J (2002) Polym Eng Sci 42:37510.1002/pen.10955 ↗
17. Lin YC, Chen X (2005) Polymer 46:1199410.1016/j.polymer.2005.10.002 ↗
18. Bair HE, Johnson GE, Merriweather R (1978) J Appl Phys 49:497610.1063/1.324443 ↗
19. Smith WM (1958) Vinyl resins. Reinhold Publishing Corporation, New York10.1097/00010694-195812000-00016 ↗
20. Browning R, Minkwitz R, Charoensirisomboon P, Sue H-J (2010) Polym Eng and Sci, DOI#22003
21. Adão MHVC, Saramago BJV, Fernandes AC (1999) J Colloid Interface Sci 217:9410.1006/jcis.1999.6279 ↗
22. ASTM D7027 (2005) ASTM International
23. ISO 19252 (2008) ISO International
24. Jiang H, Browning R, Fincher J, Gasbarro A, Jones S, Sue H-J (2008) Appl Surf Sci 254:449410.1016/j.apsusc.2008.01.067 ↗
25. Jiang H, Whitcomb J, Sue H-J (2009) SPE TPO Conf, Sterling Heights, Michigan
26. Shen CH, Springer GS (1976) J Comp Mater 10:210.1177/002199837601000101 ↗
27. Hansen CM (1980) Polym Eng Sci 20:25210.1002/pen.760200405 ↗
28. Bruder F, Haese W (1999) Jpn J Appl Phys 38:170910.1143/JJAP.38.1709 ↗
29. Barrie JA, Platt B (1963) Polymer 4:30310.1016/0032-3861(63)90038-7 ↗
30. Woo M, Piggott MR (1987) J Compos Technol Res 9:10110.1520/CTR10249J ↗
31. Karad SK, Jones FR (2005) Polymer 46:273210.1016/j.polymer.2005.01.047 ↗
32. Mitsui T, Rose MK, Fomin E, Ogletree DF, Salmeron M (2002) Phys Rev Lett 297:1850
33. Jiang H, Browning R, Sue H-J (2009) Polymer 50:405610.1016/j.polymer.2009.06.061 ↗
34. Browning R, Lim GT, Moyse A, Sun LY, Sue H-J (2006) Polym Eng Sci 46:60110.1002/pen.20507 ↗
35. Jiang H, Lim G-T, Reddy JN, Whitcomb JD, Sue H-J (2007) J Polym Sci B: Polym Phys 45:143510.1002/polb.21169 ↗