Some aspects of the fracture behaviour of Mg65Cu25Y10 bulk metallic glass during room-temperature bending
Source abstract
Abstract
The fracture behaviour of Mg65Cu25Y10 bulk metallic glass (BMG) during room-temperature three-point bending was investigated. The BMG was initially produced by casting into a wedge-shaped mold which generated an amorphous structure below the ∼4 mm thickness zone of the wedge. Three-point bend testing was then carried out on the BMG with the fracture angles and salient features of the fracture surfaces examined by scanning electron microscopy. Observations indicate that this type of deformation mode results in fracture via crack propagation from both surfaces of the samples where the tensile and compressive stresses are greatest. The direction of crack propagation was also found to deviate considerably from 45° to the length direction of sample. A scanning electron microscopy (SEM) study of the fracture surfaces indicated that deformation banding was a feature of crack propagation within compressive zone whereas the tensile zone generated a featureless surface characteristic of brittle failure. The mechanism of failure of the present alloy is discussed on the basis of the observed features on the fracture surfaces and the direction of propagation of cracks during failure and compared with the failure mechanism of samples fractured under both simple tension and compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Inoue A (2000) Acta Mater 48:27910.1016/S1359-6454(99)00300-6 ↗
2. Fan C, Inoue A (1999) Mater Trans JIM 40:137610.2320/matertrans1989.40.1376 ↗
3. Wright WJ, Saha R, Nix WD (2001) Mater Trans JIM 42:64210.2320/matertrans.42.642 ↗
4. Leng Y, Courtney TH (1991) J Mater Sci 26:58810.1007/BF00588291 ↗
5. Inoue A, Zhang W, Zhang T, Kurosaka K (2001) Acta Mater 49:264510.1016/S1359-6454(01)00181-1 ↗
6. Donovan PE (1989) Acta Mater 37:44510.1016/0001-6160(89)90228-9 ↗
7. Liu CT, Heatherly L, Easton DS et al (1998) Met Trans A 29A:181110.1007/s11661-998-0004-6 ↗
8. Lowhaphandu P, Montgomery SL, Lewandowski JJ (1999) Scripta Mater 41:1910.1016/S1359-6462(99)00128-1 ↗
9. El-Deiry PA, Vinci RP, Barbosa III N, Hufnagel TC (2001) In: Inoue A, et al (eds) Supercooled liquid, bulk glassy and nanocrystalline states of alloys, Materials Research Society, Warrendale, p L10.2
10. Xing LQ, Hufnagel TC, Ramesh KT (2001) In: Inoue A, et al (eds) Supercooled liquid, bulk glassy and nanocrystalline states of alloys, Materials Research Society, Warrendale, p L11.7
11. Flores KM, Dauskardt RH (2001) Acta Mater 49:252710.1016/S1359-6454(01)00125-2 ↗
12. Zhang ZF, Eckert J, Schultz L (2003) Acta Mater 51:116710.1016/S1359-6454(02)00521-9 ↗
13. Inoue A, Kato A, Zhang T, Kim SG, Masumoto T (1991) Mater Trans JIM 32:60910.2320/matertrans1989.32.609 ↗
14. Inoue A (1995) Mater Trans JIM 36:86610.2320/matertrans1989.36.866 ↗
15. Wert JA, Pryds N, Zhang E (2001) In: Dinesen AR, et al (eds) Proc. 22nd Riso Int. Symp., Riso National Laboratory, Denmark, p 423
16. Pryds NH, Eldrup M, Ohnuma M et al (2000) Mater Trans JIM 41:143510.2320/matertrans1989.41.1435 ↗
17. Chen G, Ferry M (in press) J Mater Sci (accepted and in press)
18. Dieter GE (1986) Introduction to mechanical metallurgy, John Wiley
19. Berthelot JM, Fatmi L (2004) Eng Fract Mech 71:153510.1016/S0013-7944(03)00215-7 ↗
20. He G, Löser W, Eckert J, Schultz L (2003) Mater Sci Eng A352:17910.1016/S0921-5093(02)00866-3 ↗
21. Honeycombe RWK (1985) The plastic deformation of metals. Edward Arnold
22. Flores KM, Dauskardt RH (2001) Mater Sci Eng A319–321:51110.1016/S0921-5093(01)01111-X ↗
23. Wright WJ, Schwarz RB, Nix WD (2001) Mater Sci Eng A319–321:22910.1016/S0921-5093(01)01066-8 ↗
24. Jiang WH, Pinkerton FE, Atzmon M (2003) Scripta Mater 48:119510.1016/S1359-6462(02)00568-7 ↗
25. Vaidyanathan R, Dao M, Ravichandran G, Suresh S (2001) Acta Mater 49:378110.1016/S1359-6454(01)00263-4 ↗
26. Patnaik MNM, Narasimhan R, Ramamurty U (2004) Acta Mater 52:333510.1016/j.actamat.2004.03.028 ↗
27. Ramamurty U, Jana S, Kawamura Y, Chattopadhyay K (2005) Acta Mater 53:70510.1016/j.actamat.2004.10.023 ↗
28. Conner RD, Johnson WL, Paton NE, Nix WD (2003) J Appl Phys 94:90410.1063/1.1582555 ↗
29. Murali P, Ramamurty U (2005) Acta Mater 53:146710.1016/j.actamat.2004.11.040 ↗