journal article·2011-06

Temperature and surface potential correlations with serrated flow of low carbon steel

A. Yilmaz

Journal of Materials Science· Volume 46· Issue 11
Publisher page

Abstract

The Portevin–Le–Chatelier (PLC) effect manifests itself as serrated plastic flow in strain controlled tensile tests of dilute alloys. The effect causes most of the material qualities to suffer, including the ductility. Monitoring the effect is important since the induced loss of ductility can cause premature failures on structural materials under load. Surface potential fluctuations of AISI 1020 low carbon steel during its serrated flow was investigated by a combined set-up of an electrochemical cell and a slow strain tensile test. The steel was exposed to an aqueous electrolyte under a strain rate of 1.6 x 10−6/s, and the surface potential was monitored in situ during the creation, magnification, and annihilation phases of the serrated flow achieved by changing test temperatures stepwise between 50 and 85 °C. The serration amplitude showed strong correlations both with test temperatures and the surface potential. A rather large potential shift around 110 mV through active direction during the burst of serrations hinted that the slip bands, in addition to temperature and strain, could also be responsible for the charge release due to the dislocation domains carried in them. The study verifies a potential use of the set-up for monitoring the PLC events in aqueous environments where load cells, extensometers etc. are not utilizable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Surface Polishing Techniques · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Cottrell AH (1953) Dislocations and plastic flow in crystals. Oxford University Press, London
2. Keh AS, Nakada Y, Leslie WC (1968) Dislocation dynamics. McGraw-Hill Press, New York
3. Penning P (1972) Acta Metall 20:116910.1016/0001-6160(72)90165-4 ↗
4. Wagner D, Moreno JC, Prioul C, Frund JM, Houssin B (2002) J Nucl Mater 300:17810.1016/S0022-3115(01)00746-2 ↗
5. Ziegenbain A, Hahner P, Neuhauser H (2001) Mater Sci Eng A 309:33610.1016/S0921-5093(00)01709-3 ↗
6. Ranc N, Wagner D (2008) Mater Sci Eng A 474:18810.1016/j.msea.2007.04.012 ↗
7. Zhenyu J, Qingchuan Z, Huifeng J, Zhongjia C, Xiaoping W (2005) Mater Sci Eng A 403:15410.1016/j.msea.2005.05.059 ↗
8. Huifeng J, Qingchuan Z, Xuedong C, Zhongjia C, Zhenyu J, Xiaoping W, Jinghong F (2007) Acta Mater 55:221910.1016/j.actamat.2006.10.029 ↗
9. Chmelik F, Klose FB, Dierke H, Sachl J, Neuhauser H, Lukac P (2007) Mater Sci Eng A 462:5310.1016/j.msea.2006.01.169 ↗
10. McCormic PG (1988) Acta Metall 36:306110.1016/0001-6160(88)90043-0 ↗
11. Onodera R, He ZG (2002) J Jpn Inst Met 66:104810.2320/jinstmet1952.66.10_1048 ↗
12. Kubin LP, Estrin Y (1991) J Phys III 1:92910.1051/jp3:1991166 ↗
13. Fressengeas C, Beaudoin AJ, Lebyodkin M, Kubin LP, Estrin Y (2005) Mater Sci Eng A 400:22610.1016/j.msea.2005.02.073 ↗
14. Lebyodkin MA, Brechet Y, Estrin Y, Kubin LP (1995) Phys Rev Lett 74:475810.1103/PhysRevLett.74.4758 ↗
15. Thevenet D, Mliha-Touati M, Zeghloul A (1999) Mater Sci Eng A 266:17510.1016/S0921-5093(99)00029-5 ↗
16. Mulford RA, Kocks UF (1979) Acta Metall 27:112510.1016/0001-6160(79)90130-5 ↗
17. Dhar A, Clapham L, Atherton DL (2002) J Mater Sci 37:2441. doi: 10.1023/A:101541901874110.1023/A:1015419018741 ↗
18. Bruck SA, McNeill SR, Sutton MA, Peters WH (1989) Exp Mech 39:26110.1007/BF02321405 ↗
19. Zavattieri PD, Savic V, Hector LG, Fekete JR, Tong W, Xuan Y (2009) Int J Plast 25:229810.1016/j.ijplas.2009.02.008 ↗
20. Schmitter ED (2007) Phys Lett A 368:32010.1016/j.physleta.2007.04.029 ↗
21. Yilmaz A, Chandra D, Rebak RB (2005) Metall Mater Trans A 36:109710.1007/s11661-005-0203-3 ↗
22. Shaffer TF, Revie RW, Mandal A (1995) Radioact Waste Manag 21:696
23. Szklarska-Smialowska Z, Xia Z, Rebak RB (1994) Corros Sci 50:33410.5006/1.3294341 ↗
24. Darowicki K, Orlikowski J (2007) Electrochim Acta 52:404310.1016/j.electacta.2006.11.022 ↗
25. Ziegenbein A, Hahner P, Neuhauser H (2000) Comput Mater Sci 19:2810.1016/S0927-0256(00)00136-1 ↗
26. Zhang Q, Jiang Z, Jiang H, Chen Z, Wu X (2005) Int J Plast 21:215010.1016/j.ijplas.2005.03.017 ↗
27. Zdunek J, Spychalski WL, Mizera J, Kurzydlowski KJ (2007) Mater Charact 58:4610.1016/j.matchar.2006.03.009 ↗
28. Wagenhofer M, Erickson-Natishan MA, Armstrong RW, Zerilli FJ (1999) Scr Mater 41:117710.1016/S1359-6462(99)00265-1 ↗
29. Shen YZ, Oh KH, Lee DN (2004) Scr Mater 51:28510.1016/j.scriptamat.2004.04.030 ↗
30. Hahner P (1993) Mater Sci Eng A 164:2310.1016/0921-5093(93)90640-Z ↗
31. Kovacs ZS, Chinh NQ, Lendvai J (2001) J Mater Res 16:117110.1557/JMR.2001.0161 ↗
32. Shabadi R, Kumar S, Roven HJ, Dwarakadasa ES (2004) Mater Sci Eng A 382:20310.1016/j.msea.2004.04.079 ↗
33. Abbadi M, Hahner P, Zeghloul A (2002) Mater Sci Eng A 337:19410.1016/S0921-5093(02)00036-9 ↗
34. Kang J, Wilkinson DS, Embury JD, Jain M, Beaudoin AJ (2005) Scr Mater 53:49910.1016/j.scriptamat.2005.05.010 ↗
35. Clarke M (1970) Corros Sci 10:67110.1016/S0010-938X(70)80063-4 ↗
36. Roberts KJ, Shemilt LW (1969) Trans Inst Chem Eng 47:204
37. Lewis D, Northwood DO, Pearce CE (1969) Corros Sci 9:77910.1016/S0010-938X(69)80084-3 ↗
38. Fontana MG, Greene ND (1978) Corrosion engineering. McGraw Hill, New York, p 310
39. Jones DA (1996) Principles and prevention of corrosion. Prentice Hall, Upper Saddle River, p 120
40. Koehler JS (1949) Phys Rev 75:10610.1103/PhysRev.75.106 ↗
41. Landauer R (1951) Phys Rev 82:52010.1103/PhysRev.82.520 ↗
42. Landauer R (1954) Phys Rev 94:138610.1103/PhysRev.94.1386.2 ↗
43. Baxter WJ (1974) J Appl Phys 45:469210.1063/1.1663120 ↗