journal article·2010-08

Reactivity of molten aluminium with polycrystalline ZnO substrate

J. Wojewoda-Budka, N. Sobczak, J. Morgiel, R. Nowak

Journal of Materials Science· Volume 45· Issue 16
Publisher page

Abstract

The microstructure studies of the reaction product region (RPR) obtained due to the interaction between the liquid aluminium and polycrystalline zinc oxide substrate at 1273 K has been studied. The RPR extended over the oxide substrate and showed a typical C4 (co-continuous-ceramic-composites) structure composed of two interpenetrating phases. The scanning electron microscopy studies revealed that the large crystals of alumina were surrounded by an Al(Zn) metallic phase. Moreover, the transmission electron microscopy investigation showed the presence of a thin (~250 nm) layer next to the ZnO. The chemical analysis accompanied by the selected area electron diffraction patterns indicated in both cases the same stoichiometric aluminium oxide but of different crystallographic structure, i.e., large crystals had α-Al2O3 structure while the layer was identified as metastable δ-Al2O3. The results were compared to those reported for interaction between liquid aluminium and monocrystalline ZnO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Bauxite Residue and Utilization · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Sobczak N (2005) Solid State Phenom 101–102:22110.4028/www.scientific.net/SSP.101-102.221 ↗
2. Sobczak N (2006) In: Gupta N, Hunt WH (eds) Solidification processing of metal matrix composites. TMS Publications, OH, USA, pp 133–146
3. Breslin MC, Ringnala J, Seeger J, Marasco AL, Daehn GS, Fraser HL (1994) Cer Eng Sci Proc 15(4):10410.1002/9780470314500.ch12 ↗
4. Liu W, Koster U (1996) Scripta Mater 35(1):3510.1016/1359-6462(96)00084-X ↗
5. Yoshikawa N, Kikuchi A, Taniguchi S (2002) J Am Cer Soc 85(7):182710.1111/j.1151-2916.2002.tb00360.x ↗
6. Gao Y, Jia J, Loechman RE, Ewsuk KG (1995) J Mater Res 10(5):121610.1557/JMR.1995.1216 ↗
7. Morgiel J, Sobczak N, Pomorska M (2009) In: Sobczak J (ed) Innovations in foundry, Part III (in Polish). Foundry Research Institute, Krakow, Poland, pp 101–108
8. Sobczak N, Stobierski L, Radziwill W, Ksiazek M, Warmuzek M (2004) Surf Interface Anal 36:106710.1002/sia.1838 ↗
9. Avraham S, Kaplan WD (2005) J Mater Sci 40:1093. doi: 10.1007/s10853-005-6922-410.1007/s10853-005-6922-4 ↗
10. Avraham S, Beyer P, Janssen R, Claussen N, Kaplan WD (2006) J Eur Ceram Soc 26:271910.1016/j.jeurceramsoc.2005.06.024 ↗
11. Sobczak N, Morgiel J, Kharlamow A, Ksiazek M, Radziwill W, Baliga S (1998) Inzynieria Materialowa 4(105):754
12. Loehman RE, Ewsuk KG, Tomsia AP (1996) J Am Ceram Soc 79(1):2710.1111/j.1151-2916.1996.tb07876.x ↗
13. Fahrenholtz WG, Ewsuk KV, Loehman RE, Tomsia AP (1996) Met Mater Trans 27A:210010.1007/BF02651864 ↗
14. Sobczak N, Oblakowski J, Nowak R, Kudyba A, Radziwill W (2005) J Mater Sci 40:2313. doi: 10.1007/s10853-005-1951-610.1007/s10853-005-1951-6 ↗
15. Morgiel J, Major L, Wojewoda-Budka J, Grzonka J, Pomorska M, Sobczak N (2007) In: Sobczak J (ed) Innovations in foundry, Part II (in Polish). Foundry Research Institute, Krakow, Poland, pp 239–246
16. Barzilai S, Aizenshtein M, Froumin N, Frage N (2006) Mater Sci Eng A 420:29110.1016/j.msea.2006.01.048 ↗
17. Barzilai S, Aizenshtein M, Shapiro-Tsoref E, Froumin N, Frage N (2007) Int J Adhesion Adhesive 27:35810.1016/j.ijadhadh.2006.09.004 ↗
18. Sobczak N, Nowak R, Radziwill W, Stobierski L (2008) In: Sobczak J (ed) Innovation in foundry, Part II (in Polish). Foundry Research Institute, Krakow
19. Wojewoda-Budka J, Sobczak N, Morgiel J (2010) J Microsc 237(3):253. doi: 10.1111/j.1365-2818.2009.03237.x10.1111/j.1365-2818.2009.03237.x ↗
20. Sobczak N, Kudyba A, Nowak R, Radziwill W, Oblakowski J (2005) Ceramika/Ceramics (Polish Ceramic Bull) 80:661
21. Wojewoda-Budka J, Sobczak N, Morgiel J, Nowak R (2010) Arch Metall, to be published
22. Sobczak N, Asthana R, Radziwill W, Nowak R, Kudyba A (2007) Arch Metall Mater 52(1):55
23. Sobczak N (2007) In: J. Sobczak (ed) Innovations in foundry (in Polish), Part II. Foundry Research Institute, Krakow, Poland, pp 187–198
24. Rapp RA, Ezis A, Yurek GJ (1973) Met Trans 4:128310.1007/BF02644523 ↗
25. Shen P, Fujii H, Matsumoto T, Nogi K (2004) Acta Mater 52:88710.1016/j.actamat.2003.10.024 ↗
26. Fujii H, Nakae H (1996) Acta Mater 44(9):356710.1016/1359-6454(96)00017-1 ↗
27. Nowak R, Sobczak N, Kudyba A, Radziwill W, Korpala B (2009) In: Sobczak J (ed) Innovations in foundry, Part III (in Polish). Foundry Research Institute, Krakow, Poland