A single phase semiconducting Ca-silicide film growth by sputtering conditions, annealing temperature and annealing time
Source abstract
Abstract
Ca films were directly deposited on Si(100) substrates under the same sputtering power and Ar flux by Radio frequency (R.F.) magnetron sputtering system (MS) and were subsequently annealed at 800 °C for 90 min in a vacuum furnace. The structural and morphological features of the resultant films are tested by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive analysis of X-rays (EDAX). The cubic phase Ca2Si film, the simple orthorhombic phase Ca2Si film, and the tetragonal phase Ca5Si3 film are grown directly and individually on Si(100) substrates, respectively. The experimental results indicate that the selective growth of a single phase Ca-silicide from Ca–Si system of the existence of multiple silicide phases depends on sputtering conditions, annealing temperature, and annealing time. Besides, 800 °C is the adaptive annealing temperature for a single phase Ca-silicide film growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Surface and Thin Film Phenomena · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Makita Y (1997) In: Connel M (ed) The first NREL conference on future generation photovoltaic technologies. AIP, New York, p 3
2. Eisenmann B, Schāfer H (1974) Z Naturforsch 29B:46010.1515/znb-1974-7-802 ↗
3. Inaba T, Kato A, Miura K, Akasaka M, Iida T, Momose Y, Tatsuoka H (2007) Thin Solid Films 22:822610.1016/j.tsf.2007.02.048 ↗
4. Lebègue S, Arnaud B, Alouani M (2005) Phys Rev B72:08510310.1103/PhysRevB.72.085103 ↗
5. Bost MC, Mahan JE (1985) J Appl Phys 58:269610.1063/1.335906 ↗
6. Bisi O, Braicovich L, Carbone C, Lindau I, Iandelli A, Olcese GL, Palenzona A (1989) Phys Rev B 40:1019410.1103/PhysRevB.40.10194 ↗
7. Calliari L, Marchetti F, Sancrotti M, Bisi O, Iandelli A, Olcese GL, Palenzona A (1990) Phys Rev B 41:756910.1103/PhysRevB.41.7569 ↗
8. Chemelli C, Sancrotti M, Braicovich L, Ciccacci F, Bisi O, Iandelli A, Olcese GL, Palenzona A (1989) Phys Rev B 40:1021110.1103/PhysRevB.40.10210 ↗
9. Ivanenkoa LI, Shaposhnikov VL, Filonov AB, Krivosheeva AV, Borisenko VE, Migas DB, Miglio L, Behr G, Schumann J (2004) Thin Solid Films 461:14110.1016/j.tsf.2004.02.088 ↗
10. Matsui H, Kuramoto M, Ono T, Nose Y, Tatsuoka H, Kuwabara H (2002) J Cryst Growth 237–239:212110.1016/S0022-0248(01)02276-X ↗
11. Takagi N, Sato Y, Matsuyama T, Tatsuoka H, Tanaka M, Fengmin C, Kuwabara H (2005) Appl Surf Sci 244:33010.1016/j.apsusc.2004.10.087 ↗
12. Hosono T, Kuramoto M, Matsuzawa Y, Momose Y, Maeda Y, Matsuyama T, Tatsuoka H, Fukuda Y, Hashimoto S, Kuwabara H (2003) Appl Surf Sci 216:62010.1016/S0169-4332(03)00471-9 ↗
13. Panjan P, Navnsek B, Zabkar A (1993) Thin Solid Films 228:23310.1016/0040-6090(93)90606-P ↗
14. Budke E, Krempel-Hesse J, Maidhof H, Schüssler H (1999) Surf Coat Technol 112:10810.1016/S0257-8972(98)00791-9 ↗
15. Majni G, Nobili C, Ottaviani G, Costaato M, Galli E (1981) J Appl Phys 52:404710.1063/1.329214 ↗
16. Tu KN, Ottaviani G, Thompson RD, Mayer JW (1982) J Appl Phys 53:440610.1063/1.331223 ↗