Adiabatic shear failure of high reinforcement content aluminum matrix composites
Source abstract
Abstract
Dynamic failure behaviors of high reinforcement content TiB2/Al composites were experimentally investigated using split Hopkinson pressure bar (SHPB). The TiB2/Al composites showed high flow stresses and good plastic deformation ability at high strain rates. Adiabatic temperature rise decreased the flow stresses of TiB2/Al composites, which was verified by the prediction of Johnson–Cook model. While the predictions by Cowper–Symonds model exhibited obvious strain hardening characteristic, the values of which were much higher than those of the Johnson–Cook model and the experimental. The composites were failed macroscopically in brittle fracture and some phase transformation bands were found on the shearing surfaces. The dynamic failure behavior of TiB2/Al composites was predominated by the formation of adiabatic shear bands.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Wei Q, Kecskes L, Jiao T, Hartwig KT, Ramesh KT, Ma E (2004) Acta Mater 52:1859. doi: https://doi.org/10.1016/j.actamat.2003.12.02510.1016/j.actamat.2003.12.025 ↗
2. Rosakis AJ, Ravichandran G (2000) Int J Solids Struct 37:331. doi: https://doi.org/10.1016/S0020-7683(99)00097-910.1016/S0020-7683(99)00097-9 ↗
3. Wang XB (2006) Trans Nonferrous Met Soc China 16:333. doi: https://doi.org/10.1016/S1003-6326(06)60057-510.1016/S1003-6326(06)60057-5 ↗
4. Ling Z (2000) J Comp Mater 34:101. doi: https://doi.org/10.1106/4ET5-AB4L-B6XT-TR0810.1106/4ET5-AB4L-B6XT-TR08 ↗
5. Owolabi GM, Odeshi AG, Singh MNK, Bassim MN (2007) Mater Sci Eng A 457:114. doi: https://doi.org/10.1016/j.msea.2006.12.03410.1016/j.msea.2006.12.034 ↗
6. Dai LH, Ling Z, Bai YL (1999) Scripta Mater 41:245. doi: https://doi.org/10.1016/S1359-6462(99)00153-010.1016/S1359-6462(99)00153-0 ↗
7. Dai LH, Liu LF, Bai YL (2004) Int J Solids Struct 41:5979. doi: https://doi.org/10.1016/j.ijsolstr.2004.05.02310.1016/j.ijsolstr.2004.05.023 ↗
8. Zhang Q, Chen GQ, Wu GH, Xiu ZY, Luan BF (2003) Mater Lett 57:1453. doi: https://doi.org/10.1016/S0167-577X(02)01006-610.1016/S0167-577X(02)01006-6 ↗
9. Zhao M, Wu GH, Dou ZY, Jiang LT (2004) Mater Sci Eng A 374:303. doi: https://doi.org/10.1016/j.msea.2004.03.00310.1016/j.msea.2004.03.003 ↗
10. Bao G, Lin Z (1996) Acta Mater 44:1011. doi: https://doi.org/10.1016/1359-6454(95)00236-710.1016/1359-6454(95)00236-7 ↗
11. Li Y, Ramesh KT, Chin ESC (2000) Acta Mater. 48:1563. doi: https://doi.org/10.1016/S1359-6454(99)00430-910.1016/S1359-6454(99)00430-9 ↗
12. Li Y, Ramesh KT (1998) Acta Mater 46:5633. doi: https://doi.org/10.1016/S1359-6454(98)00250-X10.1016/S1359-6454(98)00250-X ↗
13. Marchi CS, Cao FH, Kouzeli M, Mortensen A (2002) Mater Sci Eng A 337:202. doi: https://doi.org/10.1016/S0921-5093(02)00035-710.1016/S0921-5093(02)00035-7 ↗
14. Hui XD, Kou HC, He JP, Wang YL, Dong W, Chen GL (2002) Intermetallics 10:1065. doi: https://doi.org/10.1016/S0966-9795(02)00145-010.1016/S0966-9795(02)00145-0 ↗
15. Symonds PS (1965) In: Huffington NJ (ed) Behavior of materials under impact loading. ASME, New York, p 106
16. Johnson GR, Cook WH (1985) Eng Fract Mech 21:31. doi: https://doi.org/10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
17. Meyers MA (1994) Dynamic behavior of materials. Wiley, New York, p 22810.1002/9780470172278 ↗