journal article·2010-05

Dielectric Ba(Ti1−x Sn x )O3 (x = 0.13) ceramics, sintered by spark plasma and conventional methods

Gheorghe Aldica, Marin Cernea, Paul Ganea

Journal of Materials Science· Volume 45· Issue 10
Publisher page

Abstract

A two-step sintering approach composed of spark-plasma-sintering (SPS) technique at 1000 °C for 1 min and under a uniaxial pressure of 63 MPa followed by conventional sintering at 1400 °C for 3 h is proposed for synthesis of dense Ba(Ti0.87Sn0.13)O3 ceramics. Starting powders had grain size of about 90 nm and were obtained by co-precipitation. The SPS pellets consist of submicron (300–500 nm) grains. X-ray diffraction analysis of as-prepared Ba(Ti0.87Sn0.13)O3 ceramic shows the occurrence of cubic and tetragonal phase coexistence for the pellets obtained after SPS processing and the presence of only tetragonal phase in the samples after the second (conventional) sintering. Grain uniformity in the final product is high, with average size of ~2 μm. The apparent densities of the sintered pellets at temperature of 1400 °C were ~92% of the theoretical value of Ba(Ti0.87Sn0.13)O3. The ceramics exhibit a high relative dielectric constant of 6,550 and a dielectric loss (tan δ) = 0.078 at Curie temperature of 63 °C and 10 Hz.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Subbarao EC (1981) Ferroelectrics 35:14310.1080/00150198108017677 ↗
2. Vivekanandan R, Kutty TRN (1988) Ceram Int 14:20710.1016/0272-8842(88)90023-5 ↗
3. Wernicke R (1978) Ber Dtsch Keram Ges 55:356
4. Brauer H (1970) Z Angew Phys 29:282
5. Smolensky GA (1970) J Phys Soc Jpn 28:26
6. Yasuda N, Ohwa H, Asano S (1996) Jpn J Appl Phys 35:509910.1143/JJAP.35.5099 ↗
7. Oh K, Uchino K, Cross LE (1994) J Am Ceram Soc 77:280910.1111/j.1151-2916.1994.tb04509.x ↗
8. Xiaoyong W, Yujun F, Xi Y (2003) Appl Phys Lett 83:203110.1063/1.1609037 ↗
9. Mueller V, Beige H, Abicht H-P (2004) Appl Phys Lett 84:134110.1063/1.1649820 ↗
10. Munir ZA, Tamburini UA, Ohyanagi M (2006) J Mater Sci 41:763. doi: 10.1007/s10853-006-6555-210.1007/s10853-006-6555-2 ↗
11. Nava ZV, Fritsch SG, Tenailleau C, Lebey T, Durand B, Ching JYC (2009) J Electroceram 22:23810.1007/s10832-007-9396-8 ↗
12. Takeuchi T, Suyama Y, Sinclair DC, Kageyama H (2001) J Mater Sci 36:2329. doi: 10.1023/A:101758520964810.1023/A:1017585209648 ↗
13. Li B, Wang X, Cai M, Hao L, Li L (2003) Mater Chem Phys 1:17310.1016/S0254-0584(03)00195-0 ↗
14. Cernea M, Piazza D, Manea A, Vasile E, Galassi C (2007) J Am Ceram Soc 90:172810.1111/j.1551-2916.2007.01648.x ↗
15. Geske L, Lorenz V, Muller T, Jager L, Beige H, Abicht HP, Müller V (2005) J Eur Ceram Soc 25:253710.1016/j.jeurceramsoc.2005.03.096 ↗
16. Richerson DW (1992) Modern ceramic engineering: properties, processing, and use in design, 2nd edn, rev. and expanded. Marcel Dekker, Inc, New York, p 128
17. Buttner RH, Maslen EN (1992) Acta Crystallogr B 48:76410.1107/S010876819200510X ↗
18. Kwei GH, Lawson AC, Billinge SJL, Cheong SW (1993) J Phys Chem 97:236810.1021/j100112a043 ↗
19. Li B, Wang X, Li L, Zhou H, Liu X, Han X, Zhang Y, Qi X, Deng X (2004) Mater Chem Phys 83:2310.1016/j.matchemphys.2003.08.009 ↗
20. Arlt G, Hennings D, deWith G (1985) J Appl Phys 58:161910.1063/1.336051 ↗