journal article·2013-09Open access

Solid-state bonding of alloy-designed Cu–Zn brass and steel associated with phase transformation by spark plasma sintering

Naoya Masahashi, Satoshi Semboshi, Kenichi Watanabe, Yuichi Higuchi, Hideki Yamagata, Yoshitomo Ishizaki

Journal of Materials Science· Volume 48· Issue 17

Abstract

Solid-state bonding between steel and a Cu alloy was studied to investigate fabrication of advanced bimetallic composites by using spark plasma sintering (SPS). In order to obtain proper bonding strength between the mating materials, Si and Al were alloyed to Cu–Zn brass to enhance interdiffusion with steel. The alloying elements diffused from the Cu alloy to steel, which transformed from the gamma to alpha phase during bonding. Owing to the phase stability of steel, the new columnar microstructure that evolved during the transformation across the joint interface showed high bonding strength between the mating alloys. The samples bonded without fracture, defects, or inhomogeneous deformation. Microstructural observations, elementary mapping, and mechanical testing demonstrated that the SPS technique and specific bonding parameters enhanced the interdiffusion between the metals. This novel method would be well suited to strengthen bonding between two dissimilar metals with different diffusion coefficients.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Belyaev S, Rubanik V, Resnina N, Rubanik V, Rubanik O, Borisov V, Lomakin I (2010) Phys Procedia 10:5210.1016/j.phpro.2010.11.074 ↗
2. Peng J, Liu Z, Xia P, Lin M, Zeng S (2012) Mater Lett 74:8910.1016/j.matlet.2012.01.052 ↗
3. Tie LR, Xiang X, Sheng CF, Zhong LJ, Ling HL, Qing ZY (2011) Tribol Inter 44:10110.1016/j.triboint.2010.09.012 ↗
4. Abbasi M, Karimi Taheri A, Salehi MT (2011) J Alloy Compd 319:23310.1016/S0925-8388(01)00872-6 ↗
5. Masahashi N, Komatsu K, Watanabe S, Hanada S (2004) J. Alloy Compd 379:27210.1016/j.jallcom.2004.02.043 ↗
6. Berski S, Dyja H, Maranda A, Nowaczewski J, Banaszek G (2006) J Mater Process Technol 177:58210.1016/j.jmatprotec.2006.04.107 ↗
7. Nezhad MS, Ardakani AH (2009) Mater Des 30:110310.1016/j.matdes.2008.06.042 ↗
8. Chaudhari GP, Acoff V (2009) Comp Sci Technol 69:166710.1016/j.compscitech.2009.03.018 ↗
9. Yilmaz O, Çelik H (2003) J Mater Process Technol 141:6710.1016/S0924-0136(03)00029-3 ↗
10. Ghosh M, Das S, Banarjee PS, Chatterjee S (2005) Mater Sci Eng A 390:21710.1016/j.msea.2004.08.039 ↗
11. Mamalis AG, Szalay A, Vaxevanadis NM, Manolakos DE (1998) J Mater Process Technol 83:4810.1016/S0924-0136(98)00042-9 ↗
12. Kazanowski P, Epler ME, Misiolek WZ (2004) Mater Sci Eng A 369:17010.1016/j.msea.2003.11.002 ↗
13. Chang JH, Chou JM, Hsieh RI, Lee JL (2009) Mater Chem Phys 118:31410.1016/j.matchemphys.2009.07.055 ↗
14. Imgrund P, Rota A, Simchi A (2008) J Mater Process Technol 200:25910.1016/j.jmatprotec.2007.09.068 ↗
15. Groza JR, Zavaliangos A (2000) Mater Sci Eng A 287:17110.1016/S0921-5093(00)00771-1 ↗
16. Omori M (2000) Mater Sci Eng A 287:18310.1016/S0921-5093(00)00773-5 ↗
17. Duan RG, Zhan GD, Kuntz JD, Kear BH, Mukherjee AK (2004) Mater Sci Eng A 373:18010.1016/j.msea.2004.01.006 ↗
18. Nakamura T, Hayakawa K, Tanaka S, Imaizumi H, Nakagawa Y (2005) Mater Trans 46:29210.2320/matertrans.46.292 ↗
19. Hirose T, Shiba K, Ando M, Enoeda M, Akiba M (2006) Fusion Eng Des 81:64510.1016/j.fusengdes.2005.07.015 ↗
20. Miriyev A, Stern A, Tuval E, Kalabukhov S, Hooper Z, Frage N (2013) J Mater Process Technol 213:16110.1016/j.jmatprotec.2012.09.017 ↗
21. Lazarev VA, Golikov VM (1970) Phys Met Metallorg 29:154
22. Salje G, Feller-Kniepmeier M (1977) J Appl Phys 48:183310.1063/1.323934 ↗
23. Tsuji S, Yamanaka K (1974) J Jpn Inst Met 38:41510.2320/jinstmet1952.38.5_415 ↗
24. Rothman SJ, Peterson NL, Walter CM, Nowicki LJ (1968) J Appl Phys 39:504110.1063/1.1655922 ↗
25. Mackliet CA (1958) Phys Rev 109:196410.1103/PhysRev.109.1964 ↗
26. Mullen JG (1961) Phys Rev 121:164910.1103/PhysRev.121.1649 ↗
27. Sen SK, Dutt MB, Barua AK (1978) Phys Status Solidi A 45:65710.1002/pssa.2210450239 ↗
28. Almazouzi A, Macht MP, Naundorf V, Neumann G (1996) Phys Rev B 54:85710.1103/PhysRevB.54.857 ↗
29. Tomono Y, Ikushima A (1958) J Phys Soc Jpn 13:76210.1143/JPSJ.13.762 ↗
30. Wanga S, Zhoua P, Zhanga W, Cui S, Zhanga L, Yin M, Liu D, Xua H, Liu S, Dua Y (2012) Calphad 36:12710.1016/j.calphad.2011.12.005 ↗
31. Liu Y, Wang J, Duc Y, Zhang L, Liange D (2010) Calphad 34:25310.1016/j.calphad.2010.04.002 ↗
32. Masahashi N, Kondo N, Hanada S (2002) Ann Chim Sci Mater 27:S231
33. Masahashi N, Watanabe S, Nomura N, Semboshi S, Hanada S (2005) Intermetallics 13:71710.1016/j.intermet.2004.12.017 ↗
34. Masahashi N, Hanada S (2004) ISIJ Inter 44:87810.2355/isijinternational.44.878 ↗
35. ASM Alloy Phase Diagrams Center (2013). http://www1.asminternational.org/asmenterprise/apd/ . Accessed 26 Jan 2013
36. Speich GR, Gula JA, Fisher RM (1964) J Electrochem Soc 111:C203
37. Yucheng W, Zhengyi F (2002) Mater Sci Eng B 90:3410.1016/S0921-5107(01)00780-2 ↗
38. Tiwari D, Basu B, Biswas K (2009) Ceram Inter 35:69910.1016/j.ceramint.2008.02.013 ↗
39. Saida K, Tsuduki R, Nishimoto K (2004) J Jpn Inst Metal 68:41910.2320/jinstmet.68.419 ↗