journal article·2013-10

From cellulosic waste to nanocomposites. Part 2: synthesis and characterization of polyurethane/cellulose nanocomposites

Tayebeh Fattahi Meyabadi, Gity Mir Mohamad Sadeghi, Fatemeh Dadashian, Hamid Ebrahimi Zanjani Asl

Journal of Materials Science· Volume 48· Issue 20
Publisher page

Abstract

New polyurethane (PU)-based nanocomposites were synthesized through two-step in situ polymerization by incorporating low loading levels of spherical cellulose nanoparticles (CNs). Structural, mechanical, thermal, and morphological characterization of the nanocomposites was done with infrared spectroscopy, X-ray diffraction, tensile test, dynamic mechanical thermal analysis, thermogravimetry, differential scanning calorimetry, and field emission scanning electron microscopy. The results showed with incorporation of CNs there was no significant change in the structure of PU. However, the addition of 1 % CNs into PU increased the modulus nearly 42 % and tensile strength by 112 %. On the contrary, elongation at break decreased with increasing nanoparticles contents, but the nanocomposites maintained an elongation of greater than 800 %, which was still a large elongation. The thermal stability of PU enhanced with increasing the small amounts of nanoparticles. Also, incorporating of the CNs improved the phase separation between the soft and hard domains which led to an upward shift in melting temperatures and enthalpy of crystalline phase melting. These results were very encouraging in terms of using CNs as an inexpensive nanofiller and improving the mechanical and thermal properties of PU without using solvents in nanocomposite preparation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Polymer composites and self-healing · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Habibi Y, Lucia LA, Rojas OJ (2010) Chem Rev 110(6):3479. doi: 10.1021/cr900339w10.1021/cr900339w ↗
2. Li Y, Ragauskas AJ (2011) In: Reddy B (ed) Advances in diverse industrial applications of nanocomposites. InTech, Rijeka, p 17
3. Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Renneckar S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, Nogi M, Nakagaito AN, Mangalam A, Simonsen J, Benight AS, Bismarck A, Berglund LA, Peijs T (2009) J Mater Sci 45(1):1. doi: 10.1007/s10853-009-3874-010.1007/s10853-009-3874-0 ↗
4. Seydibeyoglu MO, Oksman K (2008) Compos Sci Technol 68(3–4):908. doi: 10.1016/j.compscitech.2007.08.00810.1016/j.compscitech.2007.08.008 ↗
5. Li Y, Ren H, Ragauskas AJ (2010) Nano-Micro Lett 2(2):8910.1007/BF03353624 ↗
6. Wu Q, Henriksson M, Liu X, Berglund LA (2007) Biomacromolecules 8(12):368710.1021/bm701061t ↗
7. Favier V, Chanzy H, Cavaille JY (1995) Macromolecules 28:636510.1021/ma00122a053 ↗
8. Richardson TB (2009) Nanoreinforced shape memory polyurethane. Auburn University, Auburn
9. Silva MC, Silva GG (2005) J Appl Polym Sci 98(1):336. doi: 10.1002/App.2204310.1002/app.22043 ↗
10. Rehab A, Akelah A, Agag T, Shalaby N (2007) Polym Adv Technol 18(6):463. doi: 10.1002/Pat.88710.1002/pat.887 ↗
11. Rivera-Armenta JL, Heinze T, Mendoza-Martínez AM (2004) Eur Polym J 40(12):2803. doi: 10.1016/j.eurpolymj.2004.07.01510.1016/j.eurpolymj.2004.07.015 ↗
12. Trovati G, Sanches EA, Neto SC, Mascarenhas YP, Chierice GO (2010) J Appl Polym Sci 115:26310.1002/app.31096 ↗
13. Auad ML, Richardson T, Orts WJ, Medeiros ES, Mattoso LHC, Mosiewicki MA, Marcovich NE, Aranguren MI (2011) Polym Int 60(5):743. doi: 10.1002/pi.300410.1002/pi.3004 ↗
14. Marcovich NE, Auad ML, Bellesi NE, Nutt SR, Aranguren MI (2006) J Mater Res 21(4):870. doi: 10.1557/jmr.2006.010510.1557/jmr.2006.0105 ↗
15. Xia H, Song M (2006) J Mater Chem 16(19):1843. doi: 10.1039/b601152g10.1039/b601152g ↗
16. Auad ML, Mosiewicki MA, Richardson T, Aranguren MI, Marcovich NE (2010) J Appl Polym Sci 115(2):1215. doi: 10.1002/App.3121810.1002/app.31218 ↗
17. Fereidoonnia M, Barmar M, Barikani M (2009) Polym Plast Technol Eng 48:9010.1080/03602550802539908 ↗
18. Auad ML, Contos VS, Nutt S, Aranguren MI, Marcovich NE (2008) Polym Int 57:65110.1002/pi.2394 ↗
19. Hsu JM, Yang DL, Huang SK (1999) J Polym Res 6(2):6710.1007/s10965-006-0073-4 ↗
20. Fattahi Meyabadi T, Dadashian F, Mir Mohamad Sadeghi G, Ebrahimi Zanjani Asl H J Mater Sci (under review)
21. Dyana Merline J, Reghunadhan Nair CP, Gouri C, Bandyopadhyay GG, Ninan KN (2008) J Appl Polym Sci 107:408210.1002/app.27555 ↗
22. Barmar M, Barikani M, Fereidounnia M (2006) Iran Polym J 15(9):709
23. Tien YI, Wei KH (2001) Polymer 42:321310.1016/S0032-3861(00)00729-1 ↗
24. Paik Sung CS, Schneider NS (1975) Macromolecules 8(1):6810.1021/ma60043a015 ↗
25. Merline JD, Nair CPR, Gouri C, Bandyopadhyay GG, Ninan KN (2008) J Appl Polym Sci 107(6):4082. doi: 10.1002/app.2755510.1002/app.27555 ↗
26. Paik Sung CS, Schneider NS (1978) J Mater Sci 13:1689. doi: 10.1007/BF0054873210.1007/BF00548732 ↗
27. Schneider NS, Paik Sung CS, Matton RW, Illinger JL (1975) Macromolecules 8(1):6210.1021/ma60043a014 ↗
28. Huang J, Zou JW, Chang PR, Yu JH, Dufresne A (2011) Polym Lett 5(4):36210.3144/expresspolymlett.2011.35 ↗
29. Paik Sung CS, Hu CB, Wu CS (1980) Macromolecules 13:11110.1021/ma60073a022 ↗
30. Han J, Zhu Y, Hu J, Luo H, Yeung L-Y, Li W, Meng Q, Ye G, Zhang S, Fan Y (2012) J Appl Polym Sci 123:74910.1002/app.34505 ↗
31. Cao X, Dong H, Li CM (2007) Biomacromolecules 8(3):899. doi: 10.1021/bm061036810.1021/bm0610368 ↗
32. Lin N, Huang J, Chang PR, Anderson DP, Yu J (2011) J Nanomater 2011:1. doi: 10.1155/2011/573687
33. Bonakdar S, Orang F, Rafienia M, Imani R (2008) Iran J Pharm Sci 4(1):37