Residual stress and damage effect on integrity of ground silicon nitride
Source abstract
Abstract
Ceramic workpiece integrity and residual surface stresses generated by single pass diamond grinding were evaluated for three flaring cup wheels and four machine-loop stiffnesses. Stresses in silicon nitride bars ground on one face were characterized by X-ray diffraction, strength by four-point bending, and grinding damage depth by scanning electron microscopy. A custom-built workpiece holder was used to tune the grinding machine-loop stiffness. Electrolytic in-process dressing was applied to one of the wheels to provide stable cutting conditions. The experimental results indicate machine stiffness does not have significant influence on flexural strength, but rather affects the depth of cut. All ground surfaces have some degree of damage and residual stress, and differences are revealed between wheel bonds and grit sizes. The competing phenomena of strength enhancement due to residual stress and strength degradation due to damage are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Yoshio Ichida and Kozo Kishi, Annals of the CIRP 42(1) (1993) 647.10.1016/S0007-8506(07)62529-3 ↗
2. R. Komanduri, ibid. 45(1) (1996) 509.10.1016/S0007-8506(07)63113-8 ↗
3. Hockin H. K. Xu, Said Jahanmir and Lewis K. Ives, Journal of Materials Research 11(7) (1996) 1717.10.1557/JMR.1996.0215 ↗
4. Bi Zhang, Hitoshi Tokura and Masanori Yoshikawa, Journals of The Japan Society of Precision Engineering 54(8) (1988) 1537. Written in Japanese.
5. Masanori Yoshikawa, Bi Zhang and Hitoshi Tokura, Journal of the Ceramic Society of Japan, International Edition 95 (1987) 911.
6. Bi Zhang and Trevor D. Howes, Annals of the CIRP 43(1) (1994) 305.10.1016/S0007-8506(07)62219-7 ↗
7. Trevor D. Howes Idem., Ibid. 44(1) (1995) 263.10.1016/S0007-8506(07)62322-1 ↗
8. D. Johnson-Walls, A. G. Evans, D. B. Marshall and M. R. James, Journal of the American Ceramic Society 69(1) (1986) 44.10.1111/j.1151-2916.1986.tb04691.x ↗
9. S. Malkin and T. W. Hwang, Annals of the CIRP 45(2) (1996) 569.10.1016/S0007-8506(07)60511-3 ↗
10. Noboru Morita, Takehiro Watanabe and Yoshitaro Yoshida, JSME International Journal, Series III 35(4) (1992) 667.
11. B. Eigenmann, B. Scholtes and E. Macherauch, Materials Science and Engineering, A118 (1989) 1.
12. H. K. TÖNshoff, H. Trumpold, E. Brinksmeier and H. G. Webker, Annals of the CIRP 38(2) (1989) 699.
13. John E. Mayer, Jr. and Gwo-PING Fang, Transactions of NAMRI/SME, XXII (1994) 187.
14. P. Roth, H. G. Wobker and C. Menz, Tribology Transactions, 38(3) (1995) 714.10.1080/10402009508983463 ↗
15. Timothy J. Strakna, Said Jahanmir, Richard L. Allor and Kris V. Kumar, Transactions of NAMRI/SME, XXIII (1995) 85.
16. Hockin H. K. Xu, Lanhua Wei and Said Jahanmir, Journal of Materials Research 10(12) (1995) 3204.10.1557/JMR.1995.3204 ↗
17. K. Kitajima, G. Q. Cai, N. Kumagai, Y. Tanaka and H. W. Zeng, Annals of the CIRP 41(1) (1992) 367.10.1016/S0007-8506(07)61224-4 ↗
18. R. Komanduri, D. A. Lucca and Y. Tani, Annals of the CIRP 46 (1997) 1. Keynote Paper, STC G.10.1016/S0007-8506(07)60880-4 ↗
19. John E. Mayer, Jr. and Gwo-Ping Fang, In 1st International Machining and Grinding Conference, Machining Technology Association of SME, Dearborn, Michigan, September 1995, p.153.
20. John E. Mayer, Jr. and Gwo-PING Fang, Annals of the CIRP 44(1) (1995) 279.10.1016/S0007-8506(07)62325-7 ↗
21. K. Subramanian, P. D. Redington and S. Ramanath, American Ceramic Society Bulletin, 73(3) (1994) 61.
22. G. Warnecke, U. Rosenberger and J. Milberg, Annals of the CIRP 44(1) (1995) 283.10.1016/S0007-8506(07)62326-9 ↗
23. Uwe Rosenberger and Guenter Warnecke, Transactions of NAMRI/SME, XXII (1994) 179.
24. Bi Zhang, Fulun Yang, Jiexin Wang, ZhenQI Zhu and Richard Monahan, "Transactions of the North American Manufacturing Research Institution of SME," Georgia Institute of Technology, Atlanta, GA, May 1998 (Society of Manufacturing Engineers) Vol. XXVI, p. 273.
25. K. R. Mckinney and R. W. Ice, "Fracture Mechanics for Ceramics, Rocks, and Concrete, National Bureau of Standards,"Vol. 1, edited by S. W. Freiman and E. R. Fuller, Jr. (American Society for Testing and Materials, Philadelphia, 1981) P. 118.10.1520/STP28301S ↗
26. R. W. Rice, "Fracture Mechanics for Ceramics, Rocks, and Concrete, National Bureau of Standards,"Vol. 1, edited by S.W. Freiman and E. R. Fuller, Jr. (American Society for Testing and Materials, Philadelphia, 1981) p. 96.10.1520/STP28300S ↗
27. Idem. or Id., Machining of Advanced Materials, Proceedings of the International Conference on Machining of Advanced Materials, Vol.847 (NIST Special Publication, US Government Printing Office, Washington DC, July 1993) p. 185.
28. Hyo-SOK Ahn, Lanhua Wei and Said Jahanmir, ASME Journal of Engineering Materials and Technology, 118(3) (1996) 402.10.1115/1.2806827 ↗
29. Hockin H. K. Xu and Said Jahanmir, J. Amer. Ceram. Soc., 77(5) (1994) 1388.10.1111/j.1151-2916.1994.tb05424.x ↗
30. Changshen Guo and Ronald H. Chand, In 1st International Machining and Grinding conference, Machining Technology Association of SME, Dearborn, Michigan, September 1995, p. 125.
31. ASTM, Standard Test Method for Flexure Strength of Advanced Ceramics at Ambient Temperature. American Society for Testing and Materials, C1161(94) (1994) 309.