journal article·2004-09

The influence of surface roughness and pre-oxidation state on the wettability of aluminium nitride by commercial brazes

N. Yu. Taranets, H. Jones

Journal of Materials Science· Volume 39· Issue 18
Publisher page

Abstract

The effects of roughness (Ra = 0.17–0.20 μm) and of pre-oxidation of the AlN ceramic surface on its wettability and contact interaction with commercial brazing alloys CB4 and CB5 of Ag-Cu-Ti composition have been studied. Wettability has been determined by the sessile drop method at three holding temperatures (810, 900 and 950°C). Particularities of the interface interaction have been identified by microprobe analysis for pre-oxidized samples. Experimental data are compared with data for samples polished to Ra = 0.02–0.03 μm not subjected to pre-oxidation. The results show that, for the systems under study, surface roughness does not influence the contact angle value significantly. Pre-oxidation of the AlN in air at 1250°C, however, tends to reduce wettability as a result of the replacement of braze-aluminium nitride interaction by braze-surface aluminium oxide interaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Surface Modification and Superhydrophobicity · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. YU. V. NAIDICH and V. S. ZHURAVLEV,in"Poverhnos-tnie yavleniya v rasplavah i obrazuyuschihsya iz nih tverdyh fazah" (Kabardino-Balkarskoe Knizhnoe Izdatel'stvo, Nal'chik, 1965) p. 245 (in Russian).
2. N. SOBCZAK, K. PIETRZAK, A. WOJCIECHOWSKI, W. RADZIWILL, M. KSIAZEK and L. STOBIERSKI, Trans. JWRI. 30 (2001) 173.
3. N. FROUMIN, N. FRAGE and M. DARIELL,in Proc. 10th Internat. Ceramic Congress. Part C, edited by P. Vincenzini (Techna, Faenza, 2003) p. 733.
4. A. TSOGA, S. LADAS and P. NIKOLOPOULOS, Acta Mater. 45 (1997) 3515.10.1016/S1359-6454(97)00044-X ↗
5. O. DEZELLUS, F. HODAJ, C. RADO, J. N. BARBIER and N. EUSTATHOPOULOS, ibid. 50 (2002) 979.10.1016/S1359-6454(01)00397-4 ↗
6. J. LOPEZ-CUEVAS, H. JONES and H. V. ATKINSON, Mater. Sci. Eng. A266 (1999) 161.10.1016/S0921-5093(99)00044-1 ↗
7. N. YU. TARANETS and H. JONES, Mater. Sci. Eng.A, in press.
8. R. SHUTTLEWORTH and G. L. J. BAILEY, Discuss. Fara-day Soc. 3 (1948) 16.10.1039/df9480300016 ↗
9. R. E. JOHNSON and R. H. DETTRE, Advan. Chem. 43 (1964) 112.10.1021/ba-1964-0043.ch007 ↗
10. J. D. EICK, R. J. GOOD and A. W. NEUMANN, J. Coll. Interf. Sci. 53 (1975) 235.10.1016/0021-9797(75)90010-7 ↗
11. S. J. HITCHCOCK, N. T. CARROLL and M. G. NICHOLAS, J. Mater. Sci. 16 (1981) 714.10.1007/BF02402789 ↗
12. R. M. CRISPIN and M. NICHOLAS, ibid. 11 (1976) 17.10.1007/BF00541069 ↗
13. K. LANDRY, S. KALOGEROPOULOU and N. EUSTATHOPOULOS, Mater. Sci. Eng. A 254 (1998) 99.10.1016/S0921-5093(98)00759-X ↗
14. D. SURYANARAYANA, L. MATIENZO and D. SPENCER, IEEE Trans. Comp. Hybrids Manuf. Technol. 12 (1989) 566.10.1109/33.49017 ↗
15. R. E. LOEHMAN and A. P. TOMSIA, Acta Metall. Mater. 40 (Suppl.) (1992) S75.10.1016/0956-7151(92)90266-H ↗
16. P. KRITSALIS, L. COUDURIER and N. EUSTATHOPOULOS, J. Mater. Sci. 26 (1991) 3400.10.1007/BF01124693 ↗
17. W. BYUN and H. KIM, Scripta Metall. Mater. 31 (1994) 1543.10.1016/0956-716X(94)90071-X ↗
18. D. JANICKOVIC, P. SEBO, P. DUHAJ and P. SVEC, Mater. Sci. Eng.A 304-306 (2001) 569.10.1016/S0921-5093(00)01536-7 ↗
19. D. R. STULL and H. PROPHET,"JANAF Thermochemical Tables," 2nd ed. (NSRDS-NBS 37, 1971).10.6028/NBS.NSRDS.37 ↗
20. Y. NAIDICH,in"Progress in Surface and Membrane Science," Vol. 14, edited by D. A. Cadenhead and J. F. Danielly (Academic Press, New York, 1981) p. 354.