journal article·2012-03

Prepolymerized organic–inorganic hybrid nanoparticles as fillers for light-cured methacrylate monomers

Verónica L. Mucci, Gustavo F. Arenas, Claudio J. Pérez, Claudia I. Vallo

Journal of Materials Science· Volume 47· Issue 6
Publisher page

Abstract

Poly(hydroxyethyl methacrylate)/silica (PHEMA/SiO2) hybrid organic–inorganic nanocomposites were prepared through the simultaneous polymerization of 2-hydroxyethyl methacrylate and tetraethoxysilane. PHEMA/SiO2 materials were obtained as monolithic and transparent films consisting of silica nanoparticles (diameter below 100 nm) surrounded by the PHEMA matrix. The films were crushed into fine powder and the PHEMA/SiO2 particles were used as filler of methacrylate monomers. The polymeric methacrylate present in the PHEMA/SiO2 hybrid particles improves the compatibility of the filler with the methacrylate monomer to be photopolymerized, resulting in enhanced wetting capabilities. The composites prepared from PHEMA/SiO2-prepolymerized particles offer the possibility of reduced polymerization shrinkage without severe reductions in flow characteristics of the precured polymers. The monomer conversions of composites prepared with either 30 or 60 wt% PHEMA/SiO2 particles were similar. This indicates that the penetration of visible radiation into the sample is not reduced significantly by the presence of the filler.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photopolymerization techniques and applications · Dental materials and restorations · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Klapdohr S, Moszner N (2005) Monatshefte für Chemie 136:214510.1007/s00706-004-0254-y ↗
2. Schroeder W, Arenas G, Vallo CI (2007) Polym Int 56:109910.1002/pi.2239 ↗
3. Schroeder W, Vallo CI (2007) Dent Mater 23:131310.1016/j.dental.2006.11.010 ↗
4. Arenas G, Noriega S, Vallo C, Duchowicz R (2007) Opt Commun 271:58110.1016/j.optcom.2006.10.054 ↗
5. Mucci V, Arenas G, Duchowiczc R, Cook WD, Vallo CI (2009) Dent Mater 25:10310.1016/j.dental.2008.04.014 ↗
6. Condon JR, Ferracane JL (2002) Biomaterials 23:380710.1016/S0142-9612(02)00099-6 ↗
7. Ferracane JL (2011) Dent Mater 27:2910.1016/j.dental.2010.10.020 ↗
8. Asmussen S, Vallo CI (2011) J Mater Sci 46:2308. doi: 10.1007/s10853-010-5074-310.1007/s10853-010-5074-3 ↗
9. Mucci V, Perez J, Vallo CI (2011) Polym Int 60:24710.1002/pi.2935 ↗
10. Chen MH (2010) J Dent Res 89:54910.1177/0022034510363765 ↗
11. Kristen SW, Zhang K, Antonucci JM (2005) Biomaterials 26:509510.1016/j.biomaterials.2005.01.008 ↗
12. Hajji P, David L, Gerard JF, Pascault JP, Vigier G (1999) J Polym Sci Polym Phys 37:317210.1002/(SICI)1099-0488(19991115)37:22<3172::AID-POLB2>3.0.CO;2-R ↗
13. Wei Y, Jin D, Xu J, Baran G, Qiu KY (2001) Polym Adv Technol 12:36110.1002/pat.118 ↗
14. Wei Y, Jin D, Wei G, Yang D, Xu J (1998) J Appl Polym Sci 70:168910.1002/(SICI)1097-4628(19981128)70:9<1689::AID-APP6>3.0.CO;2-V ↗
15. Wei Y, Jin D, Yang C, Wei G (1996) J Sol–Gel Sci Technol 7:19110.1007/BF00401037 ↗
16. Huang SL, Chin WK, Yang WP (2005) Polymer 46:186510.1016/j.polymer.2004.12.052 ↗
17. Landry CJT, Coltrain BK, Brady BK (1992) Polymer 33:1488
18. Landry CJT, Coltrain BK, Wesson JA, Zumbulyadis N (1992) Polymer 33:149610.1016/0032-3861(92)90127-I ↗
19. Xu K, Zhou S, Wu L (2009) J Mater Sci 44:1613. doi: 10.1007/s10853-008-3231-810.1007/s10853-008-3231-8 ↗
20. Wei Y, Jin D, Yang C, Kels M, Qiu KY (1998) Mater Sci Eng C 6:9110.1016/S0928-4931(98)00041-1 ↗
21. Patel S, Bandyopadhyay A, Vijayabaskar V, Bhowmick AK (2006) J Mater Sci 41:927. doi: 10.1007/s10853-006-6576-x10.1007/s10853-006-6576-x ↗
22. Briche S, Riassetto D, Gastaldin C, Lamarle C, Dellea O, Jamon D, Pernot E, Labeau M, Ravel G, Langlet M (2008) J Mater Sci 43:5809. doi: 10.1007/s10853-008-2884-710.1007/s10853-008-2884-7 ↗
23. Yeh JM, Hsieh CF, Yeh CW, Wu MJ, Yang HC (2007) Polym Int 56:34310.1002/pi.2143 ↗
24. Messori M, Bignotti F, De Santis R, Taurino R (2009) Polym Int 58:88010.1002/pi.2606 ↗
25. Bosch P, Monte FD, Mateo JL, Levy D (1996) J Polym Sci Polym Chem 34:328910.1002/(SICI)1099-0518(19961130)34:16<3289::AID-POLA4>3.0.CO;2-P ↗
26. Novak BM, Ellsworth MW, Verrier C (1995) In: Mark JE, Lee YC, Bianconi PA (eds) Hybrid organic–inorganic composites. ACS symposium series 585. Am Chem Soc, Washington
28. Marcovich N, Ostrovsky A, Aranguren M, Reboredo M (2009) Compos Interf 16:63910.1163/092764409X12477430713668 ↗
29. Vallo CI (2002) Polym Test 21:79310.1016/S0142-9418(02)00013-2 ↗
30. Giannotti MI, Galante MJ, Oyanguren PA, Vallo CI (2003) Polym Test 22:42910.1016/S0142-9418(02)00124-1 ↗