The effect of gas flow rate on the evolution of the surface oxide on a molten low carbon Al killed steel
Source abstract
Abstract
The oxide phase formation on a molten Al killed low carbon steel surface under a flowing Ar atmosphere with an oxygen partial pressure of Po2 = 1–5 × 10−5 atm has been visualized with a Confocal Scanning Laser Microscope (CSLM) equipped with a gold image furnace. In this study, the effect of gas flow rate variation (170–300 cm3/min) on the oxide evolution under isothermal conditions of 1600∘C was investigated. Al2O3, rather than the thermodynamically stable phase FeAl2O4, was found to precipitate under all the experimental conditions studied and the apparent rate of evolution was found to increase with increasing gas flow rate. The oxide evolved as a network that started from the container wall and grew towards the crucible center. At low flow rates the growth was a result of primarily crystal growth resulting in distinctly dendritic crystals. As the flow rate was increased, growth due to the attachment of discrete inclusions to the advancing front was observed which resulted in a final oxide network that constituted of smaller facetted particles. In the latter case, the transport of the individual inclusions to the advancing front could be caused by surface Marangoni flow due to gradients in both temperature and dissolved oxygen concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J. W. FARRELL, P. J. BILEK and D. C. HILTY, in Electric Furnace Proceedings (TMS-AIME, Pittsburgh,1970), Vol. 28, p. 64.
2. H. U. LINDENBERG and H. VORWERK, in Proceedings of the 2nd International Conference on Clean Steel (The Metals Society, Balatonfüred, Hungary, 1981) p. 241.$
3. R. RASTOGI and A. W. CRAMB, 84th Steelmaking Conference Proceedings (ISS, Baltimore, 2001), Vol. 28, p. 789.
4. K. SASAI, “Oxygen in Steelmaking: Towards Cleaner Steels” (The Institute of Materials, London, 2001) session 3.1.
5. K. SASAI and Y. MIZUKAMI, ISIJ Intern. 41 (2001) 1331.10.2355/isijinternational.41.1331 ↗
6. R. J. FRUEHAN, “The Making, Shaping and Treating of Steel” (The AISE Steel Foundation, Pittsburgh, USA, 1998) p. 24.
7. K. SASAI and Y. MIZUKAMI, ISIJ International 40 (2000) 40.10.2355/isijinternational.40.40 ↗
8. Idem., ibid. 36 (1996) 388.10.2355/isijinternational.36.388 ↗
9. Idem., ibid. 38 (1998) 332.10.2355/isijinternational.38.332 ↗
10. E. T. TURKDOGAN, “Fundamental of Steelmaking” (Institute of Materials, Carlton House Terrace, London 1996).
11. J. Y. COGNE, B. HERITIER and J. MONNOT, in Proceedings of the 3rd International Conference on Clean Steel (The Institute of Metals, Balatonfüred, Hungary, 1986).
12. W. TIEKINK and R. KOOTER, “Oxygen in Steelmaking: Towards Cleaner Steels” (The Institute of Materials, London, 2001) session 4.
13. T. B. BRAUN, J. F. ELLIOTT and M. C. FLEMMINGS, Met. Trans. 10B (1979) 171.10.1007/BF02652461 ↗
14. R. DEKKERS, Doctoral Thesis, Katholieke Universiteit Leuven, Faculteit Wetenschappen, Departement Geografie-Geologie, 2002.
15. H. YIN, H. SHIBATA, T. EMI and M. SUZUKI, ISIJ Int. 37 (1997) 936.10.2355/isijinternational.37.936 ↗
16. Idem., ISIJ International (Japan) 37 (1997) 946.10.2355/isijinternational.37.946 ↗
17. H. SHIBATA, H. YIN and T. EMI, Phil. Trans. Royal Soc. 356A (1998) 957.10.1098/rsta.1998.0200 ↗
18. H.YIN, H. SHIBATA, T. EMI and J. S. KIM, in Proc. Int. Conf. High Temperature Capillarity (N. Eustathopoulos and N. Sobczak, Krakow, Poland, 1997).
19. Y. WANG, S. SRIDHAR, A. W. CRAMB, A. GOMEZ and C. CICUTTI, AIST Transactions (2004) 2, 87.
20. G. ERIKSSON, K. HACK, S. PETERSEN, C. W. BALE, P. CHARTRAND, S. A. DEGTEROV, R. BEN MAHFOUD, J. MELANCON and A. D. PELTON, FactSage Thermochemical Software and Databases.
21. S. KIMURA, Y. NABESHIMA, K. NAKAJIMA and S. MIZOGUCHI, “Belton Memorial Symposium” (Iron and Steel Society, Sydney, Australia, 1998).