Role of structure and morphology in the elastic modulus of carbon nanotube composites
Source abstract
Abstract
The nature of nanoscale reinforcements in the carbon nanotube composites indicates nanocomposite properties are heavily dependent on the micro/nano-structure and morphology. Macroscopic parameter-based properties estimation may lead to deviation as large as 30%. In this paper, a modified shear-lag model, combined with probability statistical theory and composites morphology, is established to investigate the elastic properties of single wall carbon nanotubes (SWNTs)-reinforced polymer composites. The computational results indicated that elastic modulus of nanocomposite was remarkably dependent on the micro/nano-structure, including diameter, length, and orientation of the dispersed SWNTs. Microstructure-dependent shape factor and orientation effect factor played a key role on achieving high-performance nanocomposites. Elastic modulus of nanocomposite with well-dispersed carbon nanotubes was more susceptible to the orientation. Similarly, nanocomposite modulus was more subject to the dispersion influence when SWNTs were well-aligned. The maximal modulus was located in the zone of small rope diameters and small orientation angles when adequate interfacial bonding was provided. The computational results were also compared with experimental outcome and demonstrated good consistence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Smart Materials for Construction · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Wong EW, Sheehan PE, Lieber CM (1997) Science 277:1971. doi: https://doi.org/10.1126/science.277.5334.197110.1126/science.277.5334.1971 ↗
2. Bernholc J, Brenner D, Buongiorno Nardelli M, Meunier V, Roland C (2002) Annu Rev Mater Res 32:347. doi: https://doi.org/10.1146/annurev.matsci.32.112601.13492510.1146/annurev.matsci.32.112601.134925 ↗
3. Dujardin E, Webbesen TW, Krishan A, Yianilos PN, Trecy MMJ (1998) Phys Rev B 58:14013. doi: https://doi.org/10.1103/PhysRevB.58.1401310.1103/PhysRevB.58.14013 ↗
4. Lu J (1997) Phys Rev Lett 79:1297–1299. doi: https://doi.org/10.1103/PhysRevLett.79.129710.1103/PhysRevLett.79.1297 ↗
5. Liu T, Kumar S (2003) Nano Lett 3:647. doi: https://doi.org/10.1021/nl034071i10.1021/nl034071i ↗
6. Kong J, Soh HT, Cassell AM, Quate CF, Dai H (1998) Nature 395:878. doi: https://doi.org/10.1038/2763210.1038/27632 ↗
7. Yu MF, Files BS, Arepalli S, Ruoff RS (2000) Phys Rev Lett 84:5552. doi: https://doi.org/10.1103/PhysRevLett.84.555210.1103/PhysRevLett.84.5552 ↗
8. Belytschko T, Xiao SP, Schatz GC, Ruoff RS (2002) Phys Rev B 65:235430. doi: https://doi.org/10.1103/PhysRevB.65.23543010.1103/PhysRevB.65.235430 ↗
9. Walters DA, Ericson LM, Casavant MJ, Liu J, Colbert DT, Smith KA et al (1999) Appl Phys Lett 74:3803. doi: https://doi.org/10.1063/1.12418510.1063/1.124185 ↗
10. Saito R, Fujita M, Dresselhaus G, Dresselhaus MS (1992) Appl Phys Lett 60:2204. doi: https://doi.org/10.1063/1.10708010.1063/1.107080 ↗
11. Dresselhaus MS, Dresselhaus G, Avouris P (2001) Carbon nanotubes: synthesis, structure, properties and applications, 1st edn. Springer Verlag, New York10.1007/3-540-39947-X ↗
12. Budiansky B (1965) J Mech Phys Solids 13:223. doi: https://doi.org/10.1016/0022-5096(65)90011-610.1016/0022-5096(65)90011-6 ↗
13. Chow TS (1977) J Appl Phys 48:4072. doi: https://doi.org/10.1063/1.32343210.1063/1.323432 ↗
14. Russel WB (1973) Z Angew Math Phys 24:581. doi: https://doi.org/10.1007/BF0158816010.1007/BF01588160 ↗
15. Chou T-W, Nomura S, Taya M (1980) J Compos Mater 14:178. doi: https://doi.org/10.1177/00219983800140030110.1177/002199838001400301 ↗
16. Hashin Z (1968) J Compos Mater 2:284. doi: https://doi.org/10.1177/00219983680020030210.1177/002199836800200302 ↗
17. Laws N, McLaughlin R (1979) J Mech Phys Solids 27:1. doi: https://doi.org/10.1016/0022-5096(79)90007-310.1016/0022-5096(79)90007-3 ↗
18. Benveniste Y (1987) Mech Mater 6:147. doi: https://doi.org/10.1016/0167-6636(87)90005-610.1016/0167-6636(87)90005-6 ↗
19. Chen C-H, Cheng C-H (1996) Int J Solids Struct 33:2519. doi: https://doi.org/10.1016/0020-7683(95)00278-210.1016/0020-7683(95)00160-3 ↗
20. Chow TS (1978) J Polym Sci Polym Phys 16:959. doi: https://doi.org/10.1002/pol.1978.18016060210.1002/pol.1978.180160602 ↗
21. Mori T, Tanaka K (1973) Acta Metall 21:571–574. doi: https://doi.org/10.1016/0001-6160(73)90064-310.1016/0001-6160(73)90064-3 ↗
22. Halpin JC (1969) J Compos Mater 3:73210.1177/002199836900300419 ↗
23. Halpin JC, Kardos JL (1976) Polym Eng Sci 16:344. doi: https://doi.org/10.1002/pen.76016051210.1002/pen.760160512 ↗
24. Thostenson ET, Chou T-W (2003) J Phys D Appl Phys 36:573. doi: https://doi.org/10.1088/0022-3727/36/5/32310.1088/0022-3727/36/5/323 ↗
25. Ashrafi B, Hubert P (2006) Comp Sci Tech 66:387. doi: https://doi.org/10.1016/j.compscitech.2005.07.02010.1016/j.compscitech.2005.07.020 ↗
26. Jiang B, Liu C, Zhang C, Wang B, Wang Z (2007) Compos Part B 38:24. doi: https://doi.org/10.1016/j.compositesb.2006.05.00210.1016/j.compositesb.2006.05.002 ↗
27. Cox HL (1952) Br J Appl Phys 3:72. doi: https://doi.org/10.1088/0508-3443/3/3/30210.1088/0508-3443/3/3/302 ↗
28. Nayfeh AH (1977) Fibre Sci Tech 10:195. doi: https://doi.org/10.1016/0015-0568(77)90020-310.1016/0015-0568(77)90020-3 ↗
29. McCartney LN (1992) Analytical models of stress transfer in unidirectional composites and cross-ply laminates, and their application to the prediction of matrix/transverse cracking. Proceedings of IUTAM Symposium, Blacksburg, VA, 1991, 25110.1007/978-3-642-84792-9_14 ↗
30. Nairn JA (1973) Mech Mater 26:63. doi: https://doi.org/10.1016/S0167-6636(97)00023-910.1016/S0167-6636(97)00023-9 ↗
31. Fukuda H, Kawata K (1974) Fiber Sci Tech 7:207. doi: https://doi.org/10.1016/0015-0568(74)90018-910.1016/0015-0568(74)90018-9 ↗
32. Jayaraman K, Kortschot MT (1996) J Mater Sci 31:2059. doi: https://doi.org/10.1007/BF0035662710.1007/BF00356627 ↗
33. Kallmes O, Bernire G, Perez MA (1977) Pap Tech Ind 18:222
34. Fu SY, Lauke B (1998) Comp Sci Tech 58:38910.1016/S0266-3538(97)00129-2 ↗
35. Wang S, Liang Z, Wang B, Zhang C (2006) Nanotechnology 17:634. doi: https://doi.org/10.1088/0957-4484/17/3/00310.1088/0957-4484/17/3/003 ↗
36. Kacir L, Narkis M, Ishai O (1975) Polym Eng Sci 15:525. doi: https://doi.org/10.1002/pen.76015070810.1002/pen.760150708 ↗
37. Salvetat JP, Andrew G, Briggs D, Bonard JM, Bacsa RR, Kulik AJ, Stöckli T, Burnham NA, Forró L (1999) Phys Rev Lett 82:944. doi: https://doi.org/10.1103/PhysRevLett.82.94410.1103/PhysRevLett.82.944 ↗
38. Shankar KR (2003) Department of Industrial Engineering, Master of Science thesis, Preparation and characterization of magnetically aligned carbon nanotubes buckypaper and composites