Eco-composite developed using biomorphous stiff skeleton of carbonised yucca and furfuryl alcohol as a filler
Source abstract
Abstract
The aim of this research was to prepare a monolithic porous carbon–carbon composite on the basis of porous stiff skeleton obtained via carbonisation of blocks cut from horticultural waste, lignified inflorescence stems of yucca, Yucca flaccida. Then the blocks were infiltrated by furfuryl alcohol, polymerised, cross-linked and carbonised. Raw yucca carbonised at various temperatures and the resultant ecological composites were characterised using the following methods: helium gas densitometry, ultrasonic and electrical resistance measurements, the physical adsorption of N2 gas at −196 °C, scanning (SEM) and transmission (TEM) electron microscopies. Elemental analysis, i.e. the CHN content and organic constituents, were determined for raw yucca. The thermal decomposition of composites and their precursors were investigated at temperatures ranging from 20 to 940 °C using thermogravimetric analysis (TGA). The composites were found to be highly porous carbon materials thermo-resistant in inert atmosphere with a strong skeleton and hierarchically ordered structures. Their elastic and electrical properties were found to be anisotropic and dependent on the support properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Polymer composites and self-healing · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Rambo CR, Cao J, Sieber H (2004) Mater Chem Phys 87:345. doi: https://doi.org/10.1016/j.matchemphys.2004.05.03110.1016/j.matchemphys.2004.05.031 ↗
2. Sun B, Fan T, Zhang D et al (2004) Carbon 42:177. doi: https://doi.org/10.1016/j.carbon.2003.10.00810.1016/j.carbon.2003.10.008 ↗
3. Mizutani M, Takase H, Adachi N et al (2005) Sci Technol Adv Mater 6:7610.1016/j.stam.2004.08.004 ↗
4. Fey T, Sieber H, Greil P (2005) J Eur Ceram Soc 25:1015. doi: https://doi.org/10.1016/j.jeurceramsoc.2004.05.00810.1016/j.jeurceramsoc.2004.05.008 ↗
5. Rambo CR, Cao J, Rusina O et al (2005) Carbon 43:1174. doi: https://doi.org/10.1016/j.carbon.2004.12.00910.1016/j.carbon.2004.12.009 ↗
6. Onyestyak G, Valyon J, Papp K (2005) Mater Sci Eng A 412:48. doi: https://doi.org/10.1016/j.msea.2005.08.05010.1016/j.msea.2005.08.050 ↗
7. Liu Z, Fan T, Zhang W et al (2005) Micropor Mesopor Mater 85:82. doi: https://doi.org/10.1016/j.micromeso.2005.06.02110.1016/j.micromeso.2005.06.021 ↗
8. Kim Y-J, Lee B-J, Suezaki H et al (2006) Carbon 44:1592. doi: https://doi.org/10.1016/j.carbon.2006.02.01110.1016/j.carbon.2006.02.011 ↗
9. Luo M, Gao J, Zhang X et al (2007) Mater Lett 61:186. doi: https://doi.org/10.1016/j.matlet.2006.04.02710.1016/j.matlet.2006.04.027 ↗
10. Li J, Shi X, Wang L et al (2007) J Colloid Interface Sci 315:230. doi: https://doi.org/10.1016/j.jcis.2007.06.06510.1016/j.jcis.2007.06.065 ↗
11. Wang Q, Jin GQ, Wang DH et al (2007) Mater Sci Eng A 459:1. doi: https://doi.org/10.1016/j.msea.2007.02.06310.1016/j.msea.2007.02.063 ↗
12. Ghanem H, Kormann M, Gerhard H et al (2007) J Eur Ceram Soc 27:3433. doi: https://doi.org/10.1016/j.jeurceramsoc.2007.02.19710.1016/j.jeurceramsoc.2007.02.197 ↗
13. Byrne CE, Nagle DC (1997) Carbon 35:267. doi: https://doi.org/10.1016/S0008-6223(96)00135-210.1016/S0008-6223(96)00135-2 ↗
14. Singh M, Martinez-Fernandez J, de Arellano-Lopez AR (2003) Curr Opin Solid State Mater Sci 7:247. doi: https://doi.org/10.1016/j.cossms.2003.09.00410.1016/j.cossms.2003.09.004 ↗
15. Halada K (2003) Curr Opin Solid State Mater Sci 7:209. doi: https://doi.org/10.1016/j.cossms.2003.09.00710.1016/j.cossms.2003.09.007 ↗
16. Hirose T, Zhao B, Okabe T et al (2002) J Mater Sci 37:345310.1023/A:1016558922110 ↗
17. Sudin R, Swamy N (2006) J Mater Sci 41:691710.1007/s10853-006-0224-3 ↗
18. de Souza Rodrigues C, Ghavami K, Stroeven P (2006) J Mater Sci 41:6925. doi: https://doi.org/10.1007/s10853-006-0217-210.1007/s10853-006-0217-2 ↗
19. Tokoro R, Vu DM, Okubo K et al (2008) J Mater Sci 43:775. doi: https://doi.org/10.1007/s10853-007-1994-y10.1007/s10853-007-1994-y ↗
20. Krzesińska M, Pilawa B, Pusz S et al (2006) Biomass Bioenergy 30:166. doi: https://doi.org/10.1016/j.biombioe.2005.11.00910.1016/j.biombioe.2005.11.009 ↗
21. Krzesińska M, Zachariasz J (2007) J Anal Appl Pyrol 80:209. doi: https://doi.org/10.1016/j.jaap.2007.02.00910.1016/j.jaap.2007.02.009 ↗
22. Krzesińska M, Zachariasz J (2007) J Phys: Conf Ser 79 Paper No. 012012
23. Krzesińska M, Zachariasz J, Muszyński J et al (2008) Bioresour Technol 99:5110. doi: https://doi.org/10.1016/j.biortech.2007.09.05010.1016/j.biortech.2007.09.050 ↗
24. Celzard A, Krzesińska M, Begin D et al (2002) Carbon 40:557. doi: https://doi.org/10.1016/S0008-6223(01)00140-310.1016/S0008-6223(01)00140-3 ↗
25. Krzesińska M, Zachariasz J (2007) J Phys: Conf Ser 79 Paper No. 012011
26. Cheng HM, Endo H, Okabe T et al (1999) J Porous Mater 6:233. doi: https://doi.org/10.1023/A:100968401465110.1023/A:1009684014651 ↗
27. Kercher AK, Nagle DC (2003) Carbon 41:15. doi: https://doi.org/10.1016/S0008-6223(02)00261-010.1016/S0008-6223(02)00261-0 ↗
28. Basay E, Ozaki SK, Yalinkilic MK (2004) Wood Sci Technol 38:405