Effect of finishing rolling temperature on fire resistance and dynamic strain aging behavior of a structural steel
Source abstract
Abstract
The influence of finishing rolling temperature (FRT) on dynamic strain aging (DSA) behavior and high-temperature resistance of a fire resistant steel microalloyed with Mo and Nb was investigated by means of tensile tests performed at temperatures ranging from 25 to 600 °C and strain rates of 10−4 to 10−1 s−1. In these steels, DSA manifestations are less intense than those observed for carbon steels and they take place at higher temperatures. The precipitation behavior of the steels was also considered. Hardness of samples heat treated at 100–600 °C displayed a maximum at 400 °C. Samples treated at this temperature and tensile tested at 600 °C did not show a higher yield stress than the untreated specimens. Results obtained indicated that DSA in the fire resistant steel might have a contribution for its fire resistance. The empirical activation energies related to the appearance of serrations on the stress–strain curves and to the maxima on the variation of tensile strength with temperature suggested that the high-temperature strengthening associated with DSA in this steel is the dynamic interaction of interstitial-substitutional solute dipoles and dislocations. The steel with lower FRT is more susceptible to DSA because of its higher amount of carbon in solid solution and showed better results in terms of high-temperature resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Kelly FS, Sha W (1999) J Construct Steel Res 50:223. doi: https://doi.org/10.1016/S0143-974X(98)00252-110.1016/S0143-974X(98)00252-1 ↗
2. Keira K (1998) Nippon Steel Tech Rep 77:88
3. Chijiiwa R, Yoshida Y, Uemori R, Tamehiro H, Funato K, Horii Y (1993) Nippon Steel Tech Rep 58:47
4. Kamada Y, Fukuda Y, Nakazato T, Hirayama H, Kawano K, Ogata R (1991) Sumitomo Met Tech Rep 47:23
5. Leslie WC (1982) The physical metallurgy of steels. McGraw-Hill Book Company, New York
6. Baird JD, Jamielson A (1972) JISI 210:841
7. Gunduz S (2002) Ironmak Steelmak 29:341. doi: https://doi.org/10.1179/03019230222500457510.1179/030192302225004575 ↗
8. Sha W, Kelly FS, Browne P, Blackmore SPO (2002) J Mater Eng Perform 8:606. doi: https://doi.org/10.1007/s11665-999-0017-310.1007/s11665-999-0017-3 ↗
9. Sha W (2004) Mater Sci Technol 20:449. doi: https://doi.org/10.1179/02670830422501230510.1179/026708304225012305 ↗
10. Panigrahi BK (2006) Bull Mater Sci 29:5910.1007/BF02709357 ↗
11. Karabuk H, Gunduz S (2004) Mater Sci Des 25:521. doi: https://doi.org/10.1016/j.matdes.2004.01.00510.1016/j.matdes.2004.01.005 ↗
12. Keh AS, Nakada YW, Leslie WC (1968) In: Rosenfield AR, Hahn GT, Bement AL Jr, Jaffee RI (eds) Dislocation dynamics, McGraw Hill, New York, p 81
13. Taheri AK, Maccagno TM, Jonas JJ (1995) ISIJ Inter 35:1532. doi: https://doi.org/10.2355/isijinternational.35.153210.2355/isijinternational.35.1532 ↗
14. Espíndola M, Weidig C, Rodrigues PCM, Andrade MS, Gonzalez BM (1995) Wire J Int 28:85
15. Porter DA, Easterling KE (1996) Phase transformation in metals and alloys. Chapman & Hall, London
16. Petarra DP, Beshers DN (1965) Acta Metall 15:791. doi: https://doi.org/10.1016/0001-6160(67)90360-410.1016/0001-6160(67)90360-4 ↗
17. Cochardt AW, Schoek G, Wiedersich H (1955) Acta Metall 3:533. doi: https://doi.org/10.1016/0001-6160(55)90111-510.1016/0001-6160(55)90111-5 ↗
18. Lenk P, Melser B (1994) Int J Pres Ves Pip 58:361. doi: https://doi.org/10.1016/0308-0161(94)90073-610.1016/0308-0161(94)90073-6 ↗