journal article·2008-01

Effect of processing conditions on the nucleation and growth of indium-tin-oxide nanowires made by pulsed laser ablation

Raluca Savu, Ednan Joanni

Journal of Materials Science· Volume 43· Issue 2
Publisher page

Abstract

Indium–tin oxide nanowires were deposited by excimer laser ablation onto catalyst-free oxidized silicon substrates at a low temperature of 500 °C in a nitrogen atmosphere. The nanowires have branches with spheres at the tips, indicating a vapor–liquid–solid (VLS) growth. The deposition time and pressure have a strong influence on the areal density and length of the nanowires. At the earlier stages of growth, lower pressures promote a larger number of nucleation centers. With the increase in deposition time, both the number and length of the wires increase up to an areal density of about 70 wires/μm2. After this point all the material arriving at the substrate is used for lengthening the existing wires and their branches. The nanowires present the single-crystalline cubic bixbyite structure of indium oxide, oriented in the 〈100〉 direction. These structures have potential applications in electrical and optical nanoscale devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Rao CNR, Deepak FL, Gundiah G, Govindaraj A (2003) Prog Solid State Chem 31:510.1016/j.progsolidstchem.2003.08.001 ↗
2. Nguyen P, Ng HT, Yamada T, Smith MK, Li J, Han J, Meyyappan M (2004) Nano Lett 4:65110.1021/nl0498536 ↗
3. Law M, Goldberger J, Yang P (2004) Annu Rev Mater Res 34:8310.1146/annurev.matsci.34.040203.112300 ↗
4. Xia Y, Yang P, Sun Y, Wu Y, Mayers B, Gates B, Yin Y, Kim F, Yan H (2003) Adv Mater 15:35310.1002/adma.200390087 ↗
5. Tahar RBH, Ban T, Ohya Y, Takahashi Y (1998) J Appl Phys 83:263110.1063/1.367025 ↗
6. Savu R, Joanni E (2006) Mater Sci Forum 514–516:116110.4028/www.scientific.net/MSF.514-516.1161 ↗
7. Ederth J, Heszler P, Hultaker A, Niklasson GA, Granqvist CG (2003) Thin Solid Films 445:19910.1016/S0040-6090(03)01164-7 ↗
8. Reddy VS, Das K, Dhar A, Ray SK (2006) Semicond Sci Technol 21:174710.1088/0268-1242/21/12/043 ↗
9. Morales-Paliza MA, Haglund RF Jr, Feldman LC (2002) Appl Phys Lett 80:375710.1063/1.1481243 ↗
10. Kim HW, Kim NH, Lee C (2005) Appl Phys A 81:113510.1007/s00339-004-3200-2 ↗
11. Wan Q, Wei M, Zhi D, MacManus-Driscoll JL, Blamire MG (2006) Adv Mater 18:23410.1002/adma.200501673 ↗
12. Limmer SJ, Cruz SV, Cao GZ (2004) Appl Phys A 79:42110.1007/s00339-004-2738-3 ↗
13. Liang YX, Li SQ, Nie L, Wang YG, Wang TH (2006) Appl Phys Lett 88:193119-1
14. Wan Q, Feng P, Wang TH (2006) Appl Phys Lett 89:123102-1
15. Yu D, Wang D, Yu W, Qian Y (2003) Mater Lett 58:8410.1016/S0167-577X(03)00420-8 ↗
16. Chen YQ, Jiang J, Wang B, Hou JG (2004) J Phys D: Appl Phys 37:331910.1088/0022-3727/37/23/014 ↗
17. Savu R, Joanni E (2006) Scr Mater 55:97910.1016/j.scriptamat.2006.08.022 ↗
18. Liu QX, Wang CX, Xu NS, Yang GW (2005) Phys Rev B 72:085417–110.1103/PhysRevB.72.085417 ↗
19. Kwon SJ, Park JG (2006) J Phys: Condens Matter 18:3875
20. Chandrasekaran H, Sumanasekara GU, Sunkara MK (2006) J Phys Chem B 110:1835110.1021/jp0639750 ↗