Structural and mechanical properties of the spines from Echinocactus grusonii cactus
Source abstract
Abstract
It is intuitional that most cactus spines are hard and sharp, but their structures and properties have never been systematically studied. Here, we report a comprehensive study on the microstructures and mechanical properties of spines from Echinocactus grusonii cactus for the first time by combining optic and scanning electron microscope investigations, x-ray microanalysis, as well as nanoindentation and tensile tests. It is found that the cactus spine consists of fibres with diameter of 5–15 μm and length of hundreds of micrometres and sclerified epidermis, but contains no mineralisation component as some hard substance does. The spine fibres have high crystallinity and in high alignment. Nanoindentation experiments show that the spine has much higher longitude hardness than that of bamboo reported in the literatures, although their transverse hardness is nearly identical to that of woods, crops, and bamboo. The indentation modulus of the spine cell wall is also within the same order of magnitude as woods, crops and bamboo, with detailed value similar to that of bamboo and slightly lower than that of woods and crops. The tensile strength of the dry spine is measured to be 140 MPa within the range of tensile strength of bamboo reported in the literatures. It is also found that the fresh spine has certain toughness, but the dry spine becomes brittle. The high crystallinity and high alignment of fibres in the cactus spines as well as the very small multifibrillar angle within each fibre can explain the special mechanical properties of the spines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Botanical Research and Applications · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Lev-Yadun S, Ne’eman G (2007) Color changes in old aposematic thorns, spines, and prickles. Isr J Plant Sci 54(4):327–33310.1560/IJPS_54_4_327 ↗
2. Ronel M, Lev-Yadun S (2009) Spiny plants in the archaeological record of Israel. J Arid Environ 73(8):754–76110.1016/j.jaridenv.2009.02.009 ↗
3. Cooper SM, Ginnett TF (1998) Spines protect plants against browsing by small climbing mammals. Oecologia 113(2):219–22110.1007/s004420050371 ↗
4. Gowda JH (1996) Spines of Acacia tortilis: what do they defend and how? Oikos 77:279–28410.2307/3546066 ↗
5. Lucas PW, Turner IM, Dominy NJ, Yamashita N (2000) Mechanical defences to herbivory. Ann Bot-London 86(5):913–92010.1006/anbo.2000.1261 ↗
6. Halpern M, Raats D, Lev-Yadun S (2007) Plant biological warfare: thorns inject pathogenic bacteria into herbivores. Environ Microbiol 9(3):584–59210.1111/j.1462-2920.2006.01174.x ↗
7. Mauseth JD (2006) Structure–function relationships in highly modified shoots of Cactaceae. Ann Bot-London 98(5):901–92610.1093/aob/mcl133 ↗
8. Bobich EG, Nobel PS (2001) Vegetative reproduction as related to biomechanics, morphology and anatomy of four cholla cactus species in the Sonoran desert. Ann Bot-London 87(4):485–49310.1006/anbo.2000.1360 ↗
9. Rundel PW, Ehleringer J, Mooney HA, Gulmon SL (1980) Patterns of drought response in leaf-succulent shrubs of the coastal Atacama Desert in Northern Chile. Oecologia 46(2):196–20010.1007/BF00540126 ↗
10. Mauseth JD (1977) Cytokinin-and gibberellic acid-induced effects on the determination and morphogenesis of leaf primordia in Opuntia polyacantha (Cactaceae). Am J Bot 64(3):337–34610.2307/2441977 ↗
11. Gibson LJ (2012) The hierarchical structure and mechanics of plant materials. J R Soc Interface 9(76):2749–276610.1098/rsif.2012.0341 ↗
12. Malainine ME, Dufresne A, Dupeyre D, Mahrouz M, Vuong R, Vignon MR (2003) Structure and morphology of cladodes and spines of Opuntia ficus-indica. Cellulose extraction and characterisation. Carbohyd Polym 51(1):77–8310.1016/S0144-8617(02)00157-1 ↗
13. Mosco A (2009) Micro-morphology and anatomy of Turbinicarpus (Cactaceae) spines. Rev Mex Biodivers 80(1):119–128
14. Peharec P, PosiloviĆ H, Balen B, Krsnik-Rasol M (2010) Spine micromorphology of normal and hyperhydric Mammillaria gracilis Pfeiff. (Cactaceae) shoots. J Microsc-Oxford 239(1):78–8610.1111/j.1365-2818.2009.03358.x ↗
15. Gindl-Altmutter W, Keckes J (2012) The structure and mechanical properties of spines from the cactus opuntia ficus-indica. Bioresources 7(1):1232–123710.15376/biores.7.1.1232-1237 ↗
16. Schlegel U (2009) The composite structure of cactus spines. Bradleya 27:129–13810.25223/brad.n27.2009.a16 ↗
17. Loza-Cornejo S, Terrazas T (2003) Epidermal and hypodermal characteristics in North American Cactoideae (Cactaceae). J Plant Res 116(1):27–3510.1007/s10265-002-0066-2 ↗
18. Spurr AR (1969) A low-viscosity epoxy resin embedding medium for electron microscopy. J Ultrastruct Res 26(1–2):31–4310.1016/S0022-5320(69)90033-1 ↗
19. Meylan BA (1967) Measurement of microfibril angle in Pinus radiata by X-ray diffraction. Forest Prod J 17:51–58
20. Cave ID (1997) Theory of X-ray measurement of microfibril angle in wood. Wood Sci Technol 31(4):225–23410.1007/BF00702610 ↗
21. Stuart SA, Evans R (1995) X-ray diffraction estimation of the microfibril angle variation in eucalypt wood. Appita J 48(3):197–200
22. Wimmer R, Lucas BN, Oliver WC, Tsui TY (1997) Longitudinal hardness and Young’s modulus of spruce tracheid secondary walls using nanoindentation technique. Wood Sci Technol 31(2):131–14110.1007/BF00705928 ↗
23. Yu Y, Fei BH, Zhang B, Xiang Y (2007) Cell-wall mechanical properties of bamboo investigated by in-situ imaging nanoindentation. Wood Fiber Sci 39(4):527–535
24. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19(01):3–2010.1557/jmr.2004.19.1.3 ↗
25. Oliver WC, Pharr GM (1992) Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–158310.1557/JMR.1992.1564 ↗
26. Sneddon IN (1965) The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 3(1):47–5710.1016/0020-7225(65)90019-4 ↗
27. Zou L, Jin H, Lu W-Y, Li X (2009) Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers. Mater Sci Eng C 29(4):1375–137910.1016/j.msec.2008.11.007 ↗
28. Wang Y, Leppänen K, Andersson S, Serimaa R, Ren H, Fei B (2012) Studies on the nanostructure of the cell wall of bamboo using X-ray scattering. Wood Sci Technol 46(1–3):317–33210.1007/s00226-011-0405-3 ↗
29. Wu Y, Wang SQ, Zhou DG, Cheng X, Zhang Y (2009) Use of nanoindentation and silviscan to determine the mechanical properties of 10 hardwood species. Wood Fiber Sci 41(1):64–73
30. Wu Y, Wang SQ, Zhou DQ, Cheng X, Zhang Y, Cai ZY (2010) Evaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentation. Bioresour Technol 101(8):2867–287110.1016/j.biortech.2009.10.074 ↗
31. Konnerth J, Gierlinger N, Keckes J, Gindl W (2009) Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle. J Mater Sci 44(16):4399–4406. doi: 10.1007/s10853-009-3665-710.1007/s10853-009-3665-7 ↗
32. Tze WTY, Wang S, Rials TG, Pharr GM, Kelley SS (2007) Nanoindentation of wood cell walls: continuous stiffness and hardness measurements. Compos Part A Appl S 38(3):945–95310.1016/j.compositesa.2006.06.018 ↗
33. Gindl W, Schöberl T (2004) The significance of the elastic modulus of wood cell walls obtained from nanoindentation measurements. Compos Part A Appl S 35(11):1345–134910.1016/j.compositesa.2004.04.002 ↗
34. Wang XQ, Ren HQ, Zhang B, Fei BH, Burgert I (2011) Cell wall structure and formation of maturing fibres of moso bamboo (Phyllostachys pubescens) increase buckling resistance. J R Soc Interface 9(70):988–99610.1098/rsif.2011.0462 ↗
35. Tan T, Rahbar N, Allameh SM, Kwofie S, Dissmore D, Ghavami K, Soboyejo WO (2011) Mechanical properties of functionally graded hierarchical bamboo structures. Acta Biomater 7(10):3796–380310.1016/j.actbio.2011.06.008 ↗
36. Yu Y, Tian GL, Wang HK, Fei BH, Wang G (2011) Mechanical characterization of single bamboo fibers with nanoindentation and microtensile technique. Holzforschung 65(1):113–11910.1515/hf.2011.009 ↗
37. Jäger A, Bader T, Hofstetter K, Eberhardsteiner J (2011) The relation between indentation modulus, microfibril angle, and elastic properties of wood cell walls. Compos Part A Appl S 42(6):677–68510.1016/j.compositesa.2011.02.007 ↗
38. Rao KMM, Rao KM (2007) Extraction and tensile properties of natural fibers: vakka, date and bamboo. Compos Struct 77(3):288–29510.1016/j.compstruct.2005.07.023 ↗
39. Li H, Shen S (2011) The mechanical properties of bamboo and vascular bundles. J Mater Res 26(21):2749–275610.1557/jmr.2011.314 ↗