journal article·2005-05

Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints

M. Ksiazek, N. Sobczak, B. Mikulowski, W. Radziwill, B. Winiarski, M. Wojcik

Journal of Materials Science· Volume 40· Issue 9-10
Publisher page

Abstract

The subject of the work was to study the effect of Ti thin film on alumina ceramic on mechanical strength and fracture character of Al2O3/Al/Al2O3 joints. The joints were formed by liquid state bonding of alumina substrates covered with titanium thin film of 800 nm thickness using Al interlayer of 30μm thickness at temperature of 973 K in a vacuum of 0.2 mPa for 5 min. The bend strength was measured by four–point bending test at room temperature. Scanning and transmission electron microscopy were applied for detailed characterization of interface structure and failure character of fractured joint surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. R. R. TUMMALA and E. J. RYMASZEWSKI, “Microelectronic Packaging Handbook” (Van Nostrand Reinhold, New York, NY, 1989).
2. R. A. MARKS, D. R. CHAPMAN, D. T. DANIELSON and A. M. GLAESER, Acta Materialia 48 (2000) 4425.10.1016/S1359-6454(00)00229-9 ↗
3. A. G. EVANS and B. J. DALGLEISH, Mater. Sci. Engng. A162 (1993) 1.10.1016/0921-5093(90)90025-X ↗
4. B. J. DALGLEISH, E. SAIZ, A. P. TOMSIA, R. M. CANNON and R. O. RITCHIE, Scripta Metallurgica et Materialia 31 (1994) 1109.10.1016/0956-716X(94)90535-5 ↗
5. K. SUGANUMA, J. Mater. Sci. 26 (1991) 6144.10.1007/BF01113897 ↗
6. M. KSIAZEK, N. SOBCZAK, B. MIKULOWSKI, W. RADZIWILL and I. SUROWIAK, Trans. J W R I 30 (2001) 119.
7. M. KSIAZEK, N. SOBCZAK, B. MIKULOWSKI and W. RADZIWILL, in Proc. Joining of Advanced and Specialty Materials V, edited by J. E. Indacochea, J. N. DuPont, T. J. Lienert, W. Tillmann, N. Sobczak, W. F. Gale, M. Singh (Columbus, Ohio, USA 2002) p. 96
8. N. SOBCZAK, R. ASTHANA, M. KSIAZEK, W. RADZIWILL and B. MIKULOWSKI, Metallurg. and Mater. Trans. A 35A (2004) 911.10.1007/s11661-004-0016-9 ↗
9. M. D. DRORY, M. D. THOULESS and A. G. EVANS, Acta Metallurgica 36 (1998) 2019.10.1016/0001-6160(88)90303-3 ↗
10. R. O. RITCHIE, R. M. CANNON, B. J. DALGLEISH, R. H. DANSKARDT and J. M. McNANEY, Mater. Sci. Engng. A166 (1993) 221.10.1016/0921-5093(93)90325-9 ↗
11. O. RADDATZ, G. A. SCHNEIDER, W. MACKENS, H. VOSS and N. CLAUSSEN, J. Europ. Ceram. Soc. 20 (2000) 2261.10.1016/S0955-2219(00)00065-0 ↗
12. F. S. OHUCHI and M. KOHYAMA, J. Amer. Ceram. Soc. 74 (1991) 1163.10.1111/j.1151-2916.1991.tb04086.x ↗