journal article·2013-03

Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

Carlos N. Barbosa, Ricardo Simoes, Markus Franzen, Júlio C. Viana

Journal of Materials Science· Volume 48· Issue 6
Publisher page

Abstract

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene, adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Injection Molding Process and Properties · Polymer Foaming and Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Aurrekoetxea J, Sarrionandia MA, Urrutibeascoa I, Maspoch M (2003) Polymer 44:695910.1016/S0032-3861(03)00493-2 ↗
2. Godinho JS, Cunha AM, Crawford RJ (2000) Plast Rubber Compos 29:32910.1179/146580100101541139 ↗
3. Housmans J-W, Gahleitner M, Peters GW, Meijer HE (2009) Polymer 50:230410.1016/j.polymer.2009.02.050 ↗
4. Viana JC, Billon N, Cunha AM (2004) Polym Eng Sci 44:152210.1002/pen.20149 ↗
5. Viana JC, Cunha AM, Billon N (2000) In: ANTEC 2000 plastics: annual technical conference, Orlando, USA, May 7–11, 2000, Society of Plastics Engineers, p 617
6. Kalay G, Bevis MJ (1997) J Polym Sci B 35:24110.1002/(SICI)1099-0488(19970130)35:2<241::AID-POLB5>3.0.CO;2-V ↗
7. Cermak R, Obadal M, Ponizil P, Polaskova M, Stoklasa K, Heckova J (2006) Eur Polym J 42:218510.1016/j.eurpolymj.2006.03.014 ↗
8. Davé P, Chundury D (1997) J Inject Mold Technol 1:181
9. Guerrica-Echevarría G, Eguiazábal JI, Nazábal J (1998) Eur Polym J 34:121310.1016/S0014-3057(97)00228-0 ↗
10. Ozcelik B, Ozbay A, Demirbas E (2010) Int Commun Heat Mass Transfer 37:135910.1016/j.icheatmasstransfer.2010.07.001 ↗
11. Sahin S, Yayla P (2005) Polym Test 24:101210.1016/j.polymertesting.2005.07.010 ↗
12. Shie J-R (2008) Polym Adv Technol 19:7310.1002/pat.976 ↗
13. Yang Y-K (2006) Mater Manuf Process 21:91510.1080/10426910600837822 ↗
14. Zhou Y, Mallick P (2005) Polym Eng Sci 45:75510.1002/pen.20301 ↗
15. Kalay G, Bevis M (1997) J Polym Sci B 35:26510.1002/(SICI)1099-0488(19970130)35:2<265::AID-POLB6>3.0.CO;2-R ↗
16. Cermak R, Obadal M, Ponizil P, Polaskova M, Stoklasa K, Lengalova A (2005) Eur Polym J 41:183810.1016/j.eurpolymj.2005.02.020 ↗
17. Pantani R, Coccorullo I, Speranza V, Titomanlio G (2005) Prog Polym Sci 30:118510.1016/j.progpolymsci.2005.09.001 ↗
18. Viana JC, Cunha AM, Billon N (2002) Polymer 43:418510.1016/S0032-3861(02)00253-7 ↗
19. Demiray M, Isayev A (1996) SPE ANTEC Tech Papers 42:1576
20. Viana JC, Cunha AM, Billon N (2002) In: Annual conference of the polymer processing society (PPS-18), Guimarães, Portugal, June 16–20, 2002, Polymer Processing Society
21. Mok SL, Kwong CK, Lau WS (1999) Adv Polym Technol 18:22510.1002/(SICI)1098-2329(199923)18:3<225::AID-ADV3>3.0.CO;2-3 ↗
22. Barbosa CN, Viana JC, Franzen M, Simoes R (2012) Polym Eng Sci 52:184510.1002/pen.23135 ↗
23. Cunha AM, Godinho JS, Viana JC (2000) In: Cunha AM, Fakirov S (eds) Structure development during polymer processing. Kluwer, Dordrecht, p 25510.1007/978-94-011-4138-3_12 ↗
24. Moldflow Inc., Moldflow Plastics Insight 5.0 (2004) documentation
25. Viana JC (2000) Mechanical characterization of injection moulded plates, PhD thesis, University of Minho
26. Ribeiro CJ, Viana JC (2011) In: Chiaberge M (ed) New trends and developments in automotive system engineering. Intech Publishers, Rijeka. ISBN 978-953-307-517-4, p 65