journal article·2010-05

Influence of annealing duration on the erosive wear behavior of polyphenylenesulphide composites

Taner Yilmaz

Journal of Materials Science· Volume 45· Issue 9
Publisher page

Abstract

The influence of annealing duration on the erosive wear behavior of short glass fiber (40% w/w) and CaCO3 mineral particulate (25% w/w)–short glass fiber (40% w/w) (total: 65% w/w) reinforced PPS composites has been characterized under various experimental conditions by differential scanning calorimetry (DSC) and erosion measurements. The erosive wear of the composites have been evaluated at different impingement angles (30, 45, 60, and 90°) and at four different annealing periods (30, 60, 90, and 120 min). Increase in the total crystallization causes an improvement in the erosive wear properties of the samples. Annealing time controls the morphology by influencing the degree of crystallinity in the matrix and in the fiber–matrix interface. This formation restricts fiber–matrix debonding. There is no linear proportionality between annealing time and relative degree of crystallization. The results indicate that PPS composites show maximum in wear versus impact angle relation at 60° confirming their semi-ductile failure behavior. The morphologies of eroded surface are examined by the scanning electron microscope.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · Tribology and Wear Analysis · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Quan H, Li ZM, Yang MB, Huang R (2005) Compos Sci Technol 65:99910.1016/j.compscitech.2004.11.015 ↗
2. Cao J, Chen L (2005) Polym Compos 26:71310.1002/pc.20148 ↗
3. Tregub A, Harel H, Marom G, Migliaresi C (1993) Compos Sci Technol 48:18510.1016/0266-3538(93)90135-4 ↗
4. Incardona S, Migliaresi C, Wagner HD, Gilbert AH, Marom G (1993) Compos Sci Technol 47:4310.1016/0266-3538(93)90094-W ↗
5. Arici A, Sinmazcelik T, Capan L, Yilgor I, Yilgor E (2005) J Compos Mater 39:2110.1177/0021998305046432 ↗
6. Harsha AP, Tewari US (2002) Polym Test 21:69710.1016/S0142-9418(01)00145-3 ↗
7. Jenckel K, Tcege E, Hinrichs W (1952) Kolloid-Z 129:1910.1007/BF01802755 ↗
8. Vendramini J, Mele P, Merle G et al (2000) J Appl Polym Sci 77:251310.1002/1097-4628(20000912)77:11<2513::AID-APP21>3.0.CO;2-Q ↗
9. Kenneth E, Alderson EA (2000) Adv Mater 12:61710.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3 ↗
10. He CC, Dong X, Zhang XQ et al (2004) J Appl Polym Sci 91:298010.1002/app.13500 ↗
11. Son SJ, Lee YM, Im SS (2000) J Mater Sci 35:5767. doi: 10.1023/A:100482712874710.1023/A:1004827128747 ↗
12. Nielsen AS, Pyrz R (2003) J Mater Sci 38:597. doi: 10.1023/A:10218664293910.1023/A:1021866429394 ↗
13. Huson MG, McGill WJ (1984) J Polym Sci Polym Chem 22:357110.1002/pol.1984.170221168 ↗
14. Yue CY, Cheung WL (1993) J Mater Sci Lett 12:109210.1007/BF00420531 ↗
15. Avella M, Volpe GD, Martuscelli E et al (1992) Polym Eng Sci 32:37610.1002/pen.760320511 ↗
16. Auer C, Kalinka G, Krause T et al (1994) J Appl Polym Sci 51:40710.1002/app.1994.070510303 ↗
17. Desio GP, Rebenfeld L (1992) J Appl Polym Sci 45:200510.1002/app.1992.070451115 ↗
18. Barkoula MN, Karger-Kocsis J (2002) J Mater Sci 37:3807. doi: 10.1023/A:101963351548110.1023/A:1019633515481 ↗
19. Harsha AP, Thakre AA (2007) Wear 262:80710.1016/j.wear.2006.08.012 ↗
20. Harsha AP, Tewari US, Venkatraman B (2003) Wear 254:69310.1016/S0043-1648(03)00143-1 ↗
21. Rattan R, Bijwe J (2006) Mater Sci Eng A 420:34210.1016/j.msea.2006.01.090 ↗
22. Rattan R, Bijwe J (2007) Wear 262:56810.1016/j.wear.2006.07.001 ↗
23. Suresh A, Harsha AP, Ghosh MK (2008) Mater Lett 62:324610.1016/j.matlet.2008.02.034 ↗
24. Ruff AW, Ives LK (1975) Wear 35:19510.1016/0043-1648(75)90154-4 ↗
25. Jurga J, Garbarczyk J, Rejeibi S, Lagodzki G, Grudzinski J (1997) In: Proceedings of international polymer seminar. Gliwice, p 377
26. Saiello S, Kenny J, Nicolais L (1990) J Mater Sci 25:3493. doi: 10.1007/BF005753710.1007/BF00575375 ↗
27. Lee TH, Boey FYC, Khor KA (1995) Compos Sci Technol 53:25910.1016/0266-3538(94)00070-0 ↗
28. Scobbo JJ, Hwang CR (1994) Polym Eng Sci 34:2310.1002/pen.760342305 ↗
29. Tewari US, Harsha AP, Hager AM, Friedrich K (2003) Compos Sci Technol 63:54910.1016/S0266-3538(02)00210-5 ↗
30. Zhou SX, Wu LM, Sun J, Shen WD (2002) Prog Org Coat 45:3310.1016/S0300-9440(02)00085-1 ↗
31. Zhou R, Lu DH, Jiang YH, Li QN (2005) Wear 259:67610.1016/j.wear.2005.02.118 ↗
32. Suresh A, Harsha AP, Ghosh MK (2009) Wear 266:18410.1016/j.wear.2008.06.008 ↗
33. Sinmazcelik T, Yilmaz T (2007) Mater Des 28:64110.1016/j.matdes.2005.07.007 ↗
34. Srivastava VK (2006) Mater Sci Eng A 435–436:28210.1016/j.msea.2006.07.144 ↗