Work-hardening behaviour of a heat-treatable AA7108 aluminium alloy deformed to intermediate strains by compression
Source abstract
Abstract
This work is an experimental study of ageing and work-hardening considering various heat treatments of an AA7108 aluminium alloy in the as-cast and homogenized condition. Specimens have been exposed first to a solution heat treatment and a then to a two-step age-hardening to obtain different tempers. These tempers have been tested in an upsetting test applying state-of-the-art cold lubrication allowing intermediate strains to be reached before the onset of barrelling. The measured work-hardening response has been analyzed by fitting an extended Voce equation to the experimental stress–strain curves. With increasing overageing the stage III part of the stress–strain curve shrinks, and for the most overaged condition studied here, the stress–strain curve has reached a linear stage IV already at a strain of about 0.3. Interestingly, the slope of the stage IV curve then is lower than commonly reported for Al alloys. The microstructure and texture of the deformed material have been further investigated for a selection of tempers, and their influence on the work-hardening behaviour has been discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Kocks UF (1976) Trans ASME 98:76
2. Mecking H, Kocks UF (1981) Acta Metall 29:186510.1016/0001-6160(81)90112-7 ↗
3. Estrin Y, Mecking H (1984) Acta Metall 32:5710.1016/0001-6160(84)90202-5 ↗
4. Mughrabi H (1987) Mater Sci Eng 85:1510.1016/0025-5416(87)90463-0 ↗
5. Gottstein G et al (2000) Acta Mater 48:418110.1016/S1359-6454(99)00373-0 ↗
6. Nes E, Marthinsen K (2002) Mater Sci Eng A 322:17610.1016/S0921-5093(01)01130-3 ↗
7. Friis J et al (2006) Mater Sci Forum 519–521:190110.4028/www.scientific.net/MSF.519-521.1901 ↗
8. Cheng LM et al (2003) Metall Mater Trans A 34A:247310.1007/s11661-003-0007-2 ↗
9. Westermann I et al (2009) Mater Sci Eng A 524:15110.1016/j.msea.2009.06.036 ↗
10. Kocks UF, Mecking H (2003) Prog Mater Sci 48:17110.1016/S0079-6425(02)00003-8 ↗
11. Voce E (1948) J Inst Met 74:537
12. Hockett JE, Sherby OD (1975) J Mech Phys Solids 23:8710.1016/0022-5096(75)90018-6 ↗
13. Follansbee P, Kocks U (1988) Acta Metall 36:8110.1016/0001-6160(88)90030-2 ↗
14. Sevillano JG et al (1981) Prog Mater Sci 25:6910.1016/0079-6425(80)90001-8 ↗
15. Mecking H, Grinberg A (1975) In: 5th ICSMA, international conference on the strength of metals and alloys, p 298
16. Rollett AD et al (1987) In: Sachdev AK, Embury JD (eds) Formability and metallurgical structure. TMS, Warrendale, PA, USA
17. Pantleon W (2004) Mater Sci Eng A 387–389:25710.1016/j.msea.2003.11.088 ↗
18. Deschamps A, Bréchet Y (1999) Acta Mater 47:29310.1016/S1359-6454(98)00296-1 ↗
19. Poole WJ et al (2000) Metall Mater Trans A 31A:232710.1007/s11661-000-0148-5 ↗
20. Poole WJ et al (2005) Philos Mag 85:311310.1080/14786430500154935 ↗
21. Zehetbauer M, Seumer V (1993) Acta Metall Mater 41:57710.1016/0956-7151(93)90088-A ↗
22. Dalla Torre FH et al (2006) Acta Mater 54:113510.1016/j.actamat.2005.10.041 ↗
23. Mülders B et al (2002) Mater Sci Eng A 324:24410.1016/S0921-5093(01)01319-3 ↗
24. Nes E et al (2000) Scripta Mater 43:5510.1016/S1359-6462(00)00363-8 ↗
25. Ryen Ø et al (2006) Metall Mater Trans A 37A:200710.1007/s11661-006-0143-6 ↗
26. Seeger A (2001) Philos Mag Lett 81:12910.1080/09500830010019617 ↗
27. Kopacz I et al (1999) Model Simul Mater Sci Eng 7:87510.1088/0965-0393/7/5/318 ↗
28. Dumont D et al (2004) Mater Sci Technol 20:56710.1179/026708304225016662 ↗