journal article·2003-07

Hot shock compaction of nanocrystalline alumina

G. J. Venz, P. D. Killen, N. W. Page

Journal of Materials Science· Volume 38· Issue 13
Publisher page

Abstract

An experimental investigation of hot shock compaction of a nanocrystalline alumina powder was performed. The effects of variations in shock pressure and compaction temperature on the properties of the compacted materials were studied. It was found that the bulk density and hardness of the compacted material increased with shock pressure. Increasing compaction temperature resulted in increases in compact hardness and bonding, and reductions in cracking within the compacted specimens. The results suggest that dense, well bonded, crack free nanocrystalline ceramics may be fabricated more effectively using hot shock compaction, than by room temperature shock compaction followed by sintering or room temperature static compaction followed by sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. J. Karch, R. Birringer and H. Gleiter, Nature 330 (1987) 556.10.1038/330556a0 ↗
2. M. Ciftcioglu and M. J. Mayo, “Superplasticity in Metals, Ceramics, and Intermetallics” (Materials Research Society, Pittsburgh, Pennsylvania, 1990) p. 77.
3. M. J. Mayo, R. W. Siegel, A. Narayanasamy and W. D. Nix, J. Mater. Res. 5 (1990) 1073.10.1557/JMR.1990.1073 ↗
4. C. Suryanarayana, Int. Mater. Rev. 40 (1995) 41.10.1179/imr.1995.40.2.41 ↗
5. J. Freim, J. McKittrick and W. J. Nellis, Metall. and Mater. Trans. A 26A (1995) 2503.10.1007/BF02669408 ↗
6. K. Kondo, S. Soga, E. Rapoport, A. Sawaoka and M. Araki, J. Mater. Sci. 21 (1986) 1579.10.1007/BF01114712 ↗
7. C. A. Bruch, Ceramic Age (1967) 44.
8. S. C. Glade and N. N. Thadhani, Metall. and Mater. Trans. A 26A (1995) 2565.10.1007/BF02669414 ↗
9. W. H. Gourdin, J. Appl. Phys. 55 (1984) 172.10.1063/1.332860 ↗
10. M. A. Meyers, “Shock Waves for Industrial Applications” (Noyes Publications, Park Ridge, New Jersey, 1988) p. 265.
11. S. Shang, K. Hokamoto and M. A. Meyers, J. Mater. Sci. 27 (1992) 5470.10.1007/BF00541608 ↗
12. T. Taniguchi and K. Kondo, Adv. Ceram. Mater. 3 (1988) 399.10.1111/j.1551-2916.1988.tb00242.x ↗
13. S. L. Wang, et al., J. Mater. Sci. 23 (1988) 1786.10.1007/BF01115723 ↗
14. A. Ferreira, M. A. Meyers, N. N. Thadhani, S. N. Chang and J. R. Kough, Metall. Trans. 22A (1991) 685.10.1007/BF02670291 ↗
15. A. Ferreira, M. A. Meyers and N. N. Thadhani, ibid. 23A (1992) 3251.10.1007/BF03024532 ↗
16. W. Chen and S. G. Malghan, Powder Technology 81 (1994) 75.10.1016/0032-5910(94)02861-3 ↗
17. N. W. Page, in Proceedings of the 15th International Symposium on Shock Waves and Shock Tubes, The University of California, Berkley, July 28-August 2 1985 (Stanford University Press, 1986) p. 878.
18. M. W. Petrie and N. W. Page, J. Appl. Phys. 69 (1991) 3517.10.1063/1.348493 ↗
19. N. W. Page, Shock Waves (1994) 73.10.1007/BF01418570 ↗
20. J. R. Fitzsimmons, The Investigation of Dynamically Compacted High Temperature Superconducting Ceramics-PhD Thesis, School of Physical Sciences, Queensland University of Technology, Brisbane, 1999.