journal article·2003-02Open access

Fracture analysis of aluminium matrix composite materials reinforced with (Ni3Al)p

F. Velasco, C. E. Da Costa, N. Candela, J. M. Torralba

Journal of Materials Science· Volume 38· Issue 3

Abstract

This paper studies the influence of Ni3Al intermetallic particles on the fracture behaviour of aluminium matrix (2014) composite materials. Intermetallics were obtained by mechanical alloying and by atomisation. The composite materials were manufactured by mixing, uniaxial compacting of a preform, and subsequent extrusion without canning or degassing. The study considered materials in extruded state and after T6 heat treatment. Assessments were made from the viewpoint of microstructure (by means of optical and scanning electron microscopy), and studying the reactions between the matrix and the reinforcement. These reactions produce a highly copper-enriched interphase. The influence of the reinforcement and state of the alloy on the fracture behaviour of the composite materials was studied through scanning electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S. V. Prasad and P. K. Rohatgi, JOM 39 (1987) 22.10.1007/BF03257531 ↗
2. A. Ravikiran and M. K. Zurrapa, Scripta Mater. 36 (1997) 95.10.1016/S1359-6462(96)00337-5 ↗
3. P. C. R. Nunes and L. V. Ramanathan, Corrosion 51 (1995) 610.10.5006/1.3293621 ↗
4. M. S. Selamat, Adv. Perform. Mater. 3 (1996) 183.10.1007/BF00136745 ↗
5. D. J. Chellman and T. D. Bahya, Adv. Powder Metall. 7 (1992) 257.
6. D. O. Gothard, Mod. Dev. Powder Metall. 21 (1988) 511.
7. L. Le Brun, L. Froyen, B. Munar and L. Delaey, in Proceedings of PM'90 World Conference on Powder Metallurgy, London, June 1990, Vol. 2 (Institute of Metals, London, 1990) p. 1.
8. C. C. Koch and J. D. Whittenberger, Intermetallics 4 (1996) 339.10.1016/0966-9795(96)00001-5 ↗
9. P. PÉrez, J. L. Gonzalez-Carrasco, G. Caruana, M. Lieblich and P. Adeva, Mater. Charact. 33 (1994) 349.10.1016/1044-5803(94)90139-2 ↗
10. P. PÉrez, J. L. Gonzalez-Carrasco and P. Adeva, Mater. Sci. Eng. A 199 (1995) 211.10.1016/0921-5093(94)09726-7 ↗
11. J. Zhou, J. Duszczyk and B. M. Korevaar, in Proceedings of PM'90 World Conference on Powder Metallurgy, London, June 1990,Vol. 2 (Institute of Metals, London, 1990) p. 307.
12. J. M. Torralba, C. E. da Costa, L. E. G. Cambronero and J. M. Ruiz-Prieto, Key Eng. Mater 127-131 (1997) 929.10.4028/www.scientific.net/KEM.127-131.929 ↗
13. P. B. da Silva-Maia, F. Velasco, C. E. da Costa, W. C. Zapata and J. M. Torralba, Mater. Sci. Forum 299/300 (1999) 279.10.4028/www.scientific.net/MSF.299-300.279 ↗
14. C. E. Costa, J. M. Torralba, J. M. Ruiz-Prieto, J. M. BadÍa, V. AmigÓ and W. C. Zapata, Adv. Powder Metall. 1 (1996) 223.
15. C. E. da Costa, PhD thesis, Universidad Politécnica de Madrid, Department of Materials Science, 1998.
16. C. E. da Costa, F. Velasco and J. M. Torralba, Metall. Mater. Trans. A., accepted.
17. J. M. Torralba, F. Velasco, C. E. da Costa, I. Vergara and D. CÁceres, Compos. A 33 (2002) 427.10.1016/S1359-835X(01)00104-X ↗
18. D. J. Lloyd, Int. Mater. Rev. 39 (1994) 1.10.1179/imr.1994.39.1.1 ↗
19. D. L. McDanels, Metall. Trans. A 14 (1985) 1085.
20. S. Ghosh and S. Moorthy, Acta Metall. Mater. 46 (1998) 965.10.1016/S1359-6454(97)00289-9 ↗