journal article·2017-04Open access

Cathodic titania nanotube arrays as anode material for lithium-ion batteries

Tauseef Anwar, Wang Li, Rizwan Ur Rehman Sagar, Farhat Nosheen, Rajan Singh, Hasnain Mehdi Jafri, Khurram Shehzad, Liang Tongxiang

Journal of Materials Science· Volume 52· Issue 8

Abstract

The titanium dioxide nanotube arrays (TNAs) have been synthesized at cathode and anode via standard electrochemical method for their subsequent use as anode material for lithium-ion batteries (LIBs). The TNAs fabricated at cathode have higher Ti3+ in comparison to TNAs at anode, which was confirmed using X-ray photoelectron spectroscopy and Raman spectrometry. Moreover, the lattice parameters of cathodic TNAs are estimated via Rietveld refinement of X-ray diffraction, which also conform to Ti3+ doping and insertion of protons (H+). The electrochemical impedance spectroscopy hints an increment in the electronic conductivity of TNAs fabricated at cathode. As a result, high reversible areal–specific capacity (~385.5 µAh cm−2 at 100 µA cm−2) with excellent rate capability is acquired by utilizing TNAs fabricated at cathode as anode material in LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Evarts EC (2015) Lithium batteries: to the limits of lithium. Nature 526:S93–s95. doi: 10.1038/526S93a10.1038/526S93a ↗
2. Goodenough JB, Park K-S (2013) The Li-Ion rechargeable battery: a perspective. J Am Chem Soc 135:1167–1176. doi: 10.1021/ja309143810.1021/ja3091438 ↗
3. Yoo HD, Markevich E, Salitra G, Sharon D, Aurbach D (2014) On the challenge of developing advanced technologies for electrochemical energy storage and conversion. Mater Today 17:110–121. doi: 10.1016/j.mattod.2014.02.01410.1016/j.mattod.2014.02.014 ↗
4. Nitta N, Wu F, Lee JT, Yushin G (2015) Li-ion battery materials: present and future. Mater Today 18:252–264. doi: 10.1016/j.mattod.2014.10.04010.1016/j.mattod.2014.10.040 ↗
5. Sagar RUR, Mahmood N, Stadler FJ, Anwar T, Navale ST et al (2016) High capacity retention anode material for lithium ion battery. Electrochim Acta. doi: 10.1016/j.electacta.2016.06.03910.1016/j.electacta.2016.06.039 ↗
6. Shehzad K, Xu Y, Gao C, Duan X (2016) Three-dimensional macro-structures of two-dimensional nanomaterials. Soc. Rev, Chem. doi: 10.1039/C6CS00218H10.1039/C6CS00218H ↗
7. Liu Y, Yang Y (2016) Recent progress of TiO2-based anodes for Li Ion batteries. J. Nanomaterials 2016:15. doi: 10.1155/2016/812365210.1155/2016/8123652 ↗
8. Kyeremateng NA (2014) Self-organised TiO2 nanotubes for 2D or 3D Li-Ion microbatteries. ChemElectroChem 1:1442–1466. doi: 10.1002/celc.20140210910.1002/celc.201402109 ↗
9. Zhu Q, Hu H, Li G, Zhu C, Yu Y (2015) TiO2 nanotube arrays grafted with MnO2 nanosheets as high-performance anode for lithium ion battery. Electrochim Acta 156:252–260. doi: 10.1016/j.electacta.2015.01.02310.1016/j.electacta.2015.01.023 ↗
10. Rhee O, Lee G, Choi J (2016) Highly ordered TiO2 microcones with high rate performance for enhanced lithium-ion storage. ACS Appl Mater Interfaces 8:14558. doi: 10.1021/acsami.6b0309910.1021/acsami.6b03099 ↗
11. Yang M-C, Lee Y-Y, Xu B, Powers K, Meng YS (2012) TiO2 flakes as anode materials for Li-ion-batteries. J Power Sources 207:166–172. doi: 10.1016/j.jpowsour.2012.01.15510.1016/j.jpowsour.2012.01.155 ↗
12. Qiao Y, Hu X, Liu Y, Liang G, Croft MC, Huang Y (2013) Surface modification of MoOxSy on porous TiO2 nanospheres as an anode material with highly reversible and ultra-fast lithium storage properties. J Mater Chem A 1:15128–15134. doi: 10.1039/C3TA13582A10.1039/C3TA13582A ↗
13. Lim J, Um JH, Lee KJ, Yu S-H, Kim Y-J et al (2016) Simple size control of TiO2 nanoparticles and their electrochemical performance: emphasizing the contribution of the surface area to lithium storage at high-rates. Nanoscale 8:5688–5695. doi: 10.1039/C6NR00104A10.1039/C6NR00104A ↗
14. Song YC, Soh AK, Zhang JQ (2016) On stress-induced voltage hysteresis in lithium ion batteries: impacts of material property, charge rate and particle size. J Mater Sci 51:9902–9911. doi: 10.1007/s10853-016-0223-y10.1007/s10853-016-0223-y ↗
15. Mathew V, Gim J, Alfaruqi MH, Kim S, Song J et al (2015) A porous TiO2 electrode prepared by an energy efficient pyro-synthesis for advanced lithium-ion batteries. J Electrochem Soc 162:A1220–A1226. doi: 10.1149/2.0511507jes10.1149/2.0511507jes ↗
16. Zhang P, Zhang C, Xie A, Li C, Song J, Shen Y (2016) Novel template-free synthesis of hollow@porous TiO2 superior anode materials for lithium ion battery. J Mater Sci 51:3448–3453. doi: 10.1007/s10853-015-9662-010.1007/s10853-015-9662-0 ↗
17. Wang J, Xie J, Jiang Y, Zhang J, Wang Y, Zhou Z (2015) Preparation of mesoporous TiO2-B nanowires from titanium glycolate and their application as an anode material for lithium-ion batteries. J Mater Sci 50:6321–6328. doi: 10.1007/s10853-015-9172-010.1007/s10853-015-9172-0 ↗
18. Plylahan N, Letiche M, Barr MKS, Djenizian T (2014) All-solid-state lithium-ion batteries based on self-supported titania nanotubes. Electrochem Commun 43:121–124. doi: 10.1016/j.elecom.2014.03.02910.1016/j.elecom.2014.03.029 ↗
19. Zhang Z-J, Zeng Q-Y, Chou S-L, Li X-J, Li H-J et al (2014) Tuning three-dimensional TiO2 nanotube electrode to achieve high utilization of Ti substrate for lithium storage. Electrochim Acta 133:570–577. doi: 10.1016/j.electacta.2014.04.04910.1016/j.electacta.2014.04.049 ↗
20. Lamberti A, Garino N, Sacco A, Bianco S, Chiodoni A, Gerbaldi C (2015) As-grown vertically aligned amorphous TiO2 nanotube arrays as high-rate Li-based micro-battery anodes with improved long-term performance. Electrochim Acta 151:222–229. doi: 10.1016/j.electacta.2014.10.15010.1016/j.electacta.2014.10.150 ↗
21. Yildizhan MM, Sturm S, Gulgun MA (2016) Structural and electronic modifications on TiO2 anatase by Li, K or Nb doping below and above the solubility limit. J Mater Sci 51:5912–5923. doi: 10.1007/s10853-016-9893-810.1007/s10853-016-9893-8 ↗
22. Wang XH, Guan C, Sun LM, Susantyoko RA, Fan HJ, Zhang Q (2015) Highly stable and flexible Li-ion battery anodes based on TiO2 coated 3D carbon nanostructures. J Mater Chem A 3:15394–15398. doi: 10.1039/C5TA04436G10.1039/C5TA04436G ↗
23. Brumbarov J, Vivek JP, Leonardi S, Valero-Vidal C, Portenkirchner E, Kunze-Liebhauser J (2015) Oxygen deficient, carbon coated self-organized TiO2 nanotubes as anode material for Li-ion intercalation. J Mater Chem A 3:16469–16477. doi: 10.1039/C5TA03621F10.1039/C5TA03621F ↗
24. Tang SS, Li GR, Liu BH, Li ZP (2014) Carbon-coated titanium dioxide micro-bowls as an anode material for Li-ion batteries. Electrochim Acta 125:199–205. doi: 10.1016/j.electacta.2014.01.09710.1016/j.electacta.2014.01.097 ↗
25. Liu Y, Sun D, Askari S, Patel J, Macias-Montero M, et al. (2015) Enhanced dispersion of TiO2 nanoparticles in a TiO2/PEDOT:PSS hybrid nanocomposite via plasma-liquid interactions. Sci. Rep. 5: 15765. doi: 10.1038/srep15765 http://www.nature.com/articles/srep15765#supplementary-information10.1038/srep15765 ↗
26. Méndez-Medrano MG, Kowalska E, Lehoux A, Herissan A, Ohtani B et al (2016) Surface modification of TiO2 with Ag nanoparticles and CuO nanoclusters for application in photocatalysis. J Phys Chem C 120:5143–5154. doi: 10.1021/acs.jpcc.5b1070310.1021/acs.jpcc.5b10703 ↗
27. Sagar RUR, Zhang X, Xiong C, Yu Y (2014) Semiconducting amorphous carbon thin films for transparent conducting electrodes. Carbon 76:64–70. doi: 10.1016/j.carbon.2014.04.04910.1016/j.carbon.2014.04.049 ↗
28. Xu Y, Mao J (2016) Enhanced electrochemical performance of LiFePO4 cathode with carbon-TiO2 hybrid coating. J Mater Sci 51:10026–10034. doi: 10.1007/s10853-016-0229-510.1007/s10853-016-0229-5 ↗
29. Hong S-A, Lee SB, Joo O-S, Kang JW, Cho B-W, Lim J-S (2016) Synthesis of lithium titanium oxide (Li4Ti5O12) with ultrathin carbon layer using supercritical fluids for anode materials in lithium batteries. J Mater Sci 51:6220–6234. doi: 10.1007/s10853-016-9920-910.1007/s10853-016-9920-9 ↗
30. Lu Z, Yip C-T, Wang L, Huang H, Zhou L (2012) Hydrogenated TiO2 nanotube arrays as high-rate anodes for lithium-ion microbatteries. ChemPlusChem 77:991–1000. doi: 10.1002/cplu.20120010410.1002/cplu.201200104 ↗
31. Liu D, Zhang Y, Xiao P, Garcia BB, Zhang Q et al (2009) TiO2 nanotube arrays annealed in CO exhibiting high performance for lithium ion intercalation. Electrochim Acta 54:6816–6820. doi: 10.1016/j.electacta.2009.06.09010.1016/j.electacta.2009.06.090 ↗
32. Liu D, Xiao P, Zhang Y, Garcia BB, Zhang Q et al (2008) TiO 2 nanotube arrays annealed in N 2 for efficient lithium-ion intercalation. J Phys Chem C 112:11175. doi: 10.1021/jp801300j10.1021/jp801300j ↗
33. Lü X, Yang W, Quan Z, Lin T, Bai L et al (2014) Enhanced electron transport in Nb-Doped TiO2 nanoparticles via pressure-induced phase transitions. J Am Chem Soc 136:419–426. doi: 10.1021/ja410810w10.1021/ja410810w ↗
34. Kyeremateng NA, Vacandio F, Sougrati MT, Martinez H, Jumas JC et al (2013) Effect of Sn-doping on the electrochemical behaviour of TiO2 nanotubes as potential negative electrode materials for 3D Li-ion micro batteries. J Power Sources 224:269–277. doi: 10.1016/j.jpowsour.2012.09.10410.1016/j.jpowsour.2012.09.104 ↗
35. Jeong J-H, D-w Jung, Shin EW, Oh E-S (2014) Boron-doped TiO2 anode materials for high-rate lithium ion batteries. J. Alloys Compd. 604:226–232. doi: 10.1016/j.jallcom.2014.03.06910.1016/j.jallcom.2014.03.069 ↗
36. Chen S, Chu W, Huang YY, Liu X, Tong DG (2012) Preparation of porous nitrogen-doped titanium dioxide microspheres and a study of their photocatalytic, antibacterial and electrochemical activities. Mater Res Bull 47:4514–4521. doi: 10.1016/j.materresbull.2012.09.03110.1016/j.materresbull.2012.09.031 ↗
37. Ren Y, Li J, Yu J (2014) Enhanced electrochemical performance of TiO2 by Ti3 + doping using a facile solvothermal method as anode materials for lithium-ion batteries. Electrochim Acta 138:41–47. doi: 10.1016/j.electacta.2014.06.06810.1016/j.electacta.2014.06.068 ↗
38. Mahajan VK, Misra M, Raja KS, Mohapatra SK (2008) Self-organized TiO 2 nanotubular arrays for photoelectrochemical hydrogen generation: effect of crystallization and defect structures. J Phys D Appl Phys 41:12530710.1088/0022-3727/41/12/125307 ↗
39. Hwang YJ, Boukai A, Yang P (2009) High density n-Si/n-TiO2 Core/Shell nanowire arrays with enhanced photoactivity. Nano Lett 9:410–415. doi: 10.1021/nl803276310.1021/nl8032763 ↗
40. Anwar Tauseef, Wang Li, Tongxiang Liang, He Xiangming, Sagar Rizwan Ur Rehman, Shehzad K (2015) Effect of aspect ratio of titanium dioxide nanotube arrays on the performance of lithium ion battery. Int J Electrochem Sci 10:6537–654710.1016/S1452-3981(23)06740-8 ↗
41. Anwar T, Wang L, Jiaoyang L, Chen W, Sagar RUR, Tongxiang L (2016) Lithium storage study on MoO3-grafted TiO2 nanotube arrays. Appl Nanosci 6(8):1149–1157. doi: 10.1007/s13204-016-0526-y10.1007/s13204-016-0526-y ↗
42. Zhou H, Zhang Y (2013) Enhancing the capacitance of TiO2 nanotube arrays by a facile cathodic reduction process. J Power Sources 239:128–131. doi: 10.1016/j.jpowsour.2013.03.11410.1016/j.jpowsour.2013.03.114 ↗
43. Close T, Tulsyan G, Diaz CA, Weinstein SJ, Richter C (2015) Reversible oxygen scavenging at room temperature using electrochemically reduced titanium oxide nanotubes. Nat Nano 10: 418. doi: 10.1038/nnano.2015.51 http://www.nature.com/nnano/journal/v10/n5/abs/nnano.2015.51.html#supplementary-information10.1038/nnano.2015.51 ↗
44. Gennari FC, Pasquevich DM (1998) Kinetics of the anatase–rutile transformation in TiO2 in the presence of Fe2O3. J Mater Sci 33:1571–1578. doi: 10.1023/a:101751580437010.1023/a:1017515804370 ↗
45. J. Rodriguez-Carvajal, FullProf 2000: A rietveld Refinement and pattern matching analysis program (Version: April 2008). Laboratoire Le ´on Brillouin (CEA-CNRS), France
46. J. Roisnel and J. Rodriguez-Carvajal, WinPLOTR. Laboratoire Le ´on Brillouin (CEA-CNRS) Centre d’Etudes de Saclay Gif sur Yvette Cedex, France, 2000
47. https://icsd.fizkarlsruhe.de/search/basic.xhtml;jsessionid=230747B035FF921EFB0D68EBD75433C4
48. Ghicov A, Yamamoto M, Schmuki P (2008) Lattice widening in niobium-doped TiO2 nanotubes: efficient ion intercalation and swift electrochromic contrast. Angew Chem Int Ed 47:7934–7937. doi: 10.1002/anie.20080259810.1002/anie.200802598 ↗
49. Chen X, Liu L, Yu PY, Mao SS (2011) Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals. Science 331:746–750. doi: 10.1126/science.120044810.1126/science.1200448 ↗
50. Xing M, Zhang J, Chen F, Tian B (2011) An economic method to prepare vacuum activated photocatalysts with high photo-activities and photosensitivities. Chem Commun 47:4947–4949. doi: 10.1039/C1CC10537J10.1039/C1CC10537J ↗
51. Zuo F, Wang L, Wu T, Zhang Z, Borchardt D, Feng P (2010) Self-doped Ti3 + Enhanced photocatalyst for hydrogen production under visible light. J Am Chem Soc 132:11856–11857. doi: 10.1021/ja103843d10.1021/ja103843d ↗
52. Zuo F, Bozhilov K, Dillon RJ, Wang L, Smith P et al (2012) Active facets on titanium(III)-Doped TiO2: an effective strategy to improve the visible-light photocatalytic activity. Angew Chem Int Ed 51:6223–6330. doi: 10.1002/anie.20120219110.1002/anie.201202191 ↗
53. Zhang Z, Hedhili MN, Zhu H, Wang P (2013) Electrochemical reduction induced self-doping of Ti3 + for efficient water splitting performance on TiO2 based photoelectrodes. PCCP 15:15637–15644. doi: 10.1039/C3CP52759J10.1039/C3CP52759J ↗
54. Liao W, Yang J, Zhou H, Murugananthan M, Zhang Y (2014) Electrochemically self-doped TiO2 nanotube arrays for efficient visible light photoelectrocatalytic degradation of contaminants. Electrochim Acta 136:310–317. doi: 10.1016/j.electacta.2014.05.09110.1016/j.electacta.2014.05.091 ↗
55. Khan MM, Ansari SA, Pradhan D, Ansari MO, Han DH et al (2014) Band gap engineered TiO2 nanoparticles for visible light induced photoelectrochemical and photocatalytic studies. J Mater Chem A 2:637–644. doi: 10.1039/C3TA14052K10.1039/C3TA14052K ↗
56. Zorn G, Liu LH, Arnadottir L, Wang H, Gamble LJ et al (2014) X-Ray photoelectron spectroscopy investigation of the nitrogen species in photoactive perfluorophenylazide-modified surfaces. J Phys Chem C 118:376–383. doi: 10.1021/jp409338y10.1021/jp409338y ↗
57. Madsen SR, Gunnlaugsson HP, Moggach SA, Eikeland E, Wu LC et al (2016) X-Ray diffraction and mossbauer spectroscopy studies of pressure-induced phase transitions in a mixed-valence trinuclear iron complex. Chemistry. doi: 10.1002/chem.20160071810.1002/chem.201600718 ↗
58. Zaafouri A, Megdiche M, Mechi L, Gargouri M (2014) Ac conductivity study of lithium and potassium diphosphate LiK3P2O7 using impedance spectroscopy. Ionics 20:1255–1266. doi: 10.1007/s11581-014-1086-310.1007/s11581-014-1086-3 ↗