journal article·2016-02

Effect of annealing on microstructure and texture evolution of uniaxial hot compressed Mg–Al–Sn alloys

Abu Syed Humaun Kabir, Mehdi Sanjari, Jing Su, In-Ho Jung, Stephen Yue

Journal of Materials Science· Volume 51· Issue 3
Publisher page

Abstract

In this study, effects of dynamically formed precipitates on the microstructure and texture evolution were investigated during the post-deformation annealing. Two ternary alloys of Mg, Al, and Sn were produced and deformed at 250 and 300 °C to form different amounts of strain-induced precipitates during deformation and different levels of dynamic recrystallization. Subsequent annealing at deformation temperatures was performed at various times for up to 4 h and recrystallization, grain coarsening, and precipitation behaviors were characterized. The deformed structures were all partially dynamically recrystallized exhibiting necklacing. Static recrystallization (SRX) progressed by the transformation of the coarse grained un-necklaced regions to fine grains. It was found that increasing levels of pre-existing precipitates on dynamic recrystallized grain boundaries inhibited SRX as well as grain coarsening, by precipitation pinning. Texture was weakened after a short time annealing compared to the as-deformed condition and high amount of precipitates at the grain boundary restricted the grain coarsening and kept the texture weaken associated with grain coarsening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Avedesian MM, Baker H (1999) ASM specialty handbook: magnesium and magnesium alloys. ASM International, Materials Park
2. Bettles C, Barnett M (2012) Advances in wrought magnesium alloys: fundamentals of processing, properties and applications. Woodhead Publishing Limited, Cambridge10.1533/9780857093844 ↗
3. Kabir ASH, Sanjari M, Su J, Jung I-H, Yue S (2014) Effect of strain-induced precipitation on dynamic recrystallization in Mg–Al–Sn alloys. Mater Sci Eng, A 616:252–25910.1016/j.msea.2014.08.032 ↗
4. Yang X, Miura H, Sakai T (2005) Isochronal annealing behavior of magnesium alloy AZ31 after hot deformation. Mater Trans 46:2981–298710.2320/matertrans.46.2981 ↗
5. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Elsevier, Oxford
6. Huang X, Suzuki K, Chino Y (2013) Different annealing behaviours of warm rolled Mg–3Al–1Zn alloy sheets with dynamic recrystallized microstructure and deformation microstructure. Mater Sci Eng, A 560:232–24010.1016/j.msea.2012.09.062 ↗
7. Su CW, Lu L, Lai MO (2008) Recrystallization and grain growth of deformed magnesium alloy. Philos Mag 88:181–20010.1080/14786430701805566 ↗
8. Yang X-Y, Zhu Y-K, Miura H, Sakai T (2010) Static recrystallization behavior of hot-deformed magnesium alloy AZ31 during isothermal annealing. Trans Nonferr Met Soc China 20:1269–127410.1016/S1003-6326(09)60289-2 ↗
9. Bacroix B, Driver JH, Le Gall R, Maurice C, Penelle R, Réglé H et al (2004) Dynamic recrystallization and grain growth in a ZK60 magnesium alloy sheet produced by isothermal rolling. Mater Sci Forum 467–470:1175–1180
10. Eddahbi M, Valle JAd, Pérez-Prado MT, Ruano OA (2005) Comparison of the microstructure and thermal stability of an AZ31 alloy processed by ECAP and large strain hot rolling. Mater Sci Eng, A 410–411:308–31110.1016/j.msea.2005.08.081 ↗
11. Kang S-G, Kobayashi T (2004) Grain refinement on AZ31 magnesium alloy by highly strained and annealed method. Mater Sci Forum 449–452:669–672
12. Huang X, Suzuki K, Chino Y, Mabuchi M (2011) Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass. J Alloy Compd 509:7579–758410.1016/j.jallcom.2011.04.132 ↗
13. Huang X, Suzuki K, Saito N (2009) Microstructure and mechanical properties of AZ80 magnesium alloy sheet processed by differential speed rolling. Mater Sci Eng, A 508:226–23310.1016/j.msea.2008.12.052 ↗
14. Xia X, Zhang K, Li X, Ma M, Li Y (2013) Microstructure and texture of coarse-grained Mg–Gd–Y–Nd–Zr alloy after hot compression. Mater Des 44:521–52710.1016/j.matdes.2012.08.043 ↗
15. Peng T, Wang Q, Lin J, Liu M, Roven HJ (2011) Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression. Mater Sci Eng, A 528:1143–114810.1016/j.msea.2010.09.097 ↗
16. Mackenzie LWF, Pekguleryuz M (2008) The influences of alloying additions and processing parameters on the rolling microstructures and textures of magnesium alloys. Mater Sci Eng, A 480:189–19710.1016/j.msea.2007.07.003 ↗
17. Abdessameud S, Bradai D (2009) Microstructure and texture evolution in hot rolled and annealed magnesium alloy TRC AZ31. Can Metall Quart 48:433–44210.1179/cmq.2009.48.4.433 ↗
18. Bale CW, Chartrand P, Degterov SA, Eriksson G, Hack K, Ben Mahfoud R et al (2002) FactSage thermochemical software and databases. CALPHAD 26:189–22810.1016/S0364-5916(02)00035-4 ↗
19. Voorhees PW (1985) The theory of Ostwald ripening. J Stat Phys 38:231–25210.1007/BF01017860 ↗
20. Basu I, Al-Samman T (2014) Deformation, recrystallization and grain growth behavior of large-strain hot rolled binary Mg-1Dy alloy, magnesium technology. TMS, Sandiego, pp 133–138
21. Mackenzie LWF, Pekguleryuz MO (2008) The recrystallization and texture of magnesium–zinc–cerium alloys. Scr Mater 59:665–66810.1016/j.scriptamat.2008.05.021 ↗
22. Chino Y, Sassa K, Mabuchi M (2008) Texture and stretch formability of Mg–1.5 mass%Zn–0.2 mass%Ce alloy rolled at different rolling temperatures. Mater Trans 49:2916–291810.2320/matertrans.MEP2008257 ↗