Dynamic X-ray radiography for the determination of foamed bitumen bubble area distribution
Source abstract
Abstract
Foam bitumen is highly efficient in wetting and coating the surface of mineral aggregate at lower temperature. In order to improve understanding and characterization of the bitumen foam, X-ray radiography was used to study the formation and decay of bitumen foam in 2D representation. Image segmentation analysis was used to determine the foam bubble size distribution. In addition, the main parameters influencing foam bitumen formation, water content, and temperature were also investigated. The results demonstrate the influence of the water content on morphology and expansion of foam bitumen bubbles. Adding more water in the foaming process leads to quick collapse of bubbles and intensifies coalescence of foam bitumen. Higher temperatures produces larger bubbles at early foaming stage compared to lower temperature. Moreover the morphology of bubble formation depends on the types of bitumen used. An exponential function has been implemented to represent the bubble area distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Enhanced Oil Recovery Techniques · Petroleum Processing and Analysis · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Chowdhury A, Button JW (2008) A review of Warm mix asphalt. Texas Transportation Institute, College Station
2. Button JW, Estakhri C (2006) A synthesis of warm-mix asphalt. Southwest Region University Transportation Center, Texas Transportation Institute, Texas A&M University System, 2007, College Station
3. Koenders BG, Stoker DA, Bowen C, de Groot P, Larsen O, Hardy D, Wilms KP (2000) Innovative process in asphalt production and application to obtain lower operating temperatures. Presented at the 2nd Eurasphalt & Eurobitume Congress Barcelona 2000
4. Jenkins KJ (2000) Mix design consideration for cold and half-warm bituminous mixes with emphasis on foam Bituemn Doctor of Philosphy, Departement of Civil Engineering university of Stellenbosch
5. Namutebi M, Some aspects of foamed bitumen technology (2011) Licentiate Thesis, Division of Highway and Railway Engineering, Royal Institute of Technology, Stockholm
6. Muthen KM (1998) Foamed asphalt mixes CSIR TRANSPORTEK
7. van de Ven MF, Sluer BW, Jenkins KJ, van den Beemt MA (2012) New developments with half-warm foamed bitumen asphalt mixtures for sustainable and durable pavement solutions. Road Mater Pavement Des 13:713–73010.1080/14680629.2012.742630 ↗
8. Stevenson P (2012) Foam engineering fundamentals and applications. Wiley, Chichester10.1002/9781119954620 ↗
9. Matzke EB (1946) Volume-shape relationships in variant foams. A further study of the role of surface forces in three-dimensional cell shape determination. Am J Bot 33:130–14410.2307/2437329 ↗
10. Plateau JA (1873) Statique expérimentale et théorique des liquides soumis aux seules forces moléculaires. Gauthier-Villars, Paris
11. Lemlich R (1978) Prediction of changes in bubble size distribution due to interbubble gas diffusion in foam. Ind Eng Chem Fundam 17:89–9310.1021/i160066a003 ↗
12. Rami-shojaei S, Vachier C, Schmitt C (2009) Automatic analysis of 2D foam sequences: application to the characterization of aqueous proteins foams stability. Image Vis Comput 27:609–62210.1016/j.imavis.2008.10.004 ↗
13. Lambertm J, Cantat I, Delannay R, Mokso R, Cloetens P, Glazier J, Graner F (2007) Experimental growth law for bubbles in a moderately “wet” 3D liquid foam. Phys Rev Lett 99:05830410.1103/PhysRevLett.99.058304 ↗
14. Körner C, Thies M, Singer RF (2002) Modeling of metal foaming with lattice boltzmann automata. Adv Eng Mater 4:765–76910.1002/1527-2648(20021014)4:10<765::AID-ADEM765>3.0.CO;2-M ↗
15. Denis W, Stefan H (1999) The physics of foams. Clarendon Press, Oxford
16. Weaire D, Hutzler S (1999) The physics of foams. Oxford University Press, Oxford
17. Hailesilassie B, Hugener M, Bieder A, Schuetz P, Jerjen I, Partl MN (2014) Evolution of bubble size distribution during foam bitumen formation and decay (submitted to ISAP con-ference 2014)10.1201/b17219-150 ↗
18. Korner C (2008) Foam formation mechanisms in particle suspensions applied to metal foams. Mater Sci Eng 495:227–23510.1016/j.msea.2007.09.089 ↗
19. David LT, James LL (2003) Effect of die temperature on the morphology of microcellular foams Polym Eng Sci, 43:1206–122010.1002/pen.10102 ↗
20. Lesueur D (2009) The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification. Adv Colloid Interface Sci 145:42–8210.1016/j.cis.2008.08.011 ↗
21. Rodríguez-Valverde MA, Cabrerizo-Vílchez MA, Páez-Dueñas A, Hidalgo-Álvarez R (2003) Stability of highly charged particles: bitumen-in-water dispersions. Colloids Surf A 222:233–25110.1016/S0927-7757(03)00228-0 ↗
22. Banhart J (2000) Metallic foams: challenges and opportunities presented at the Eurofoam2000, MIT-Verlag Bremen, 2000
23. Mofreh FS (2007) Effect of rheology on the bitumen foamability and mechanical properties of foam bitumen stabilised mixes. Int J Pavement Eng 8:99–11010.1080/10298430601149650 ↗
24. Ramanujam JM, Jones D (2007) Characterization of foamed-bitumen stabilisation. Int J Pavement Eng 8:111–12210.1080/10298430601149676 ↗
25. Bilal MA, Cuen RHM (1997) Probability statistics and reliability for engineers. CRC Press, Boca Raton New York
26. Magrabi SA, Dlugogorski BZ, Jameson GJ (1999) Bubble size distribution and coarsening of aqueous foams. Chem Eng Sci 54:4007–402210.1016/S0009-2509(99)00098-6 ↗
27. Fainerman VB, Möbius D, Miller R (1997) Surfactants: chemistry, interfacial properties, applications. CRC Press, Boca Raton New York
28. Barik TK, Roy A (2009) Statistical distribution of bubble size in wet foam. Chem Eng Sci 64:2039–204310.1016/j.ces.2009.01.039 ↗