Micromechanical properties of grain boundaries and triple junctions in polycrystalline metal exhibiting grain-boundary sliding at 293 K
Source abstract
Abstract
The mechanical properties of grain boundaries (GBs) and the development of grain-boundary sliding (GBS) were studied in the pure Zn using precision microindentation technique, optical, electron and atomic-force microscopy. Results have shown the different dependencies of the microhardness values on the indentation depth for GBs and individual grains. When the size of the plastic zone around the imprint was comparable to the grain size, GBs acted as barriers for dislocation sliding bands and twins. With applying the higher load, more grains were involved in the process of deformation, but microhardness did not increase. That was explained by the activation of GBS, leading to the relaxation processes. In its turn, the microhardness values measured at low loads in the vicinity to GBs and triple junctions (TJs) were higher than those measured in the grain interior. Thus, movement of the ensemble of defects to the GBs during microindentation is the activating factor for GBS in polycrystalline Zn. At the same time, during spreading of the deformation at low loads in the vicinity to GBs the activation of GBS was not observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Gleiter H, Chalmers B (1972) In: High-angle grain boundaries. Pergamon press, Oxford, p 303
2. Sutton AP, Baluffi RW (1995) In: Interfaces in crystalline materials. OUP, Oxford, p 856
3. Langdon TG (2006) J Mater Sci 41:597. doi:https://doi.org/10.1007/s10853-006-6476-010.1007/s10853-006-6476-0 ↗
4. Esquil EV, Murr LE (2005) Mater Sci Eng A 409:1310.1016/j.msea.2005.04.063 ↗
5. Meyers MA, Mishra A, Benson DJ (2006) Nanotechnology April:41
6. Shen Y-L, Abell KCR, Garrett SE (2004) Damage Mech 13:22510.1177/1056789504042594 ↗
7. Pervezentsev VN, Ribin VV, Chuvil’deev VN (1992) Acta Met Mater 40:88710.1016/0956-7151(92)90065-M ↗
8. Lagow BW, Robertson IM, Jouiad M, Lassila DH, Lee TC, Birnbaum HK (2001) Mater Sci Eng A309–310:44510.1016/S0921-5093(00)01699-3 ↗
9. Leae TC, Robertson IM, Birnbaum HK (1990) Phil Mag A 62:13110.1080/01418619008244340 ↗
10. Gouldstone A, Chollacoop N, Dao M, Li J, Minor A, Shen Y-L (2007) Acta Mater 55:401510.1016/j.actamat.2006.08.044 ↗
11. Sheikh-Ali AD, Valiev RZ (1994) Mater Sci Forum 170–172:1017
12. Muktepavela F, Maniks J (2002) Interface Sci 10:2110.1023/A:1015124827250 ↗
13. Braunovic M (1973) In: Westbrook JH, Conrad H (eds) The science of hardness testing and its research applications. ASM International, p 329
14. Hockey BJ (1973) In: Westbrook JH, Conrad H (eds) The science of hardness testing and its research applications. ASM International, p 21
15. Soifer YaM, Verdyan A, Kazakevich M, Rabkin E (2002) Scripta Mater 47:79910.1016/S1359-6462(02)00284-1 ↗
16. Soer WA, Aifantis KE, De Hosson JThM (2005) Acta Mater 53:466510.1016/j.actamat.2005.07.001 ↗
17. Ohmura T, Tsuzaki K, Yin F (2005) Mater Trans 46:202610.2320/matertrans.46.2026 ↗
18. Aust KT, Hanneman RE, Niessen P, Westbrook JH (1968) Acta Met 16:29110.1016/0001-6160(68)90014-X ↗
19. Kobayashi S, Tsurekawa S, Watanabe T (2005) Acta Mater 53:105110.1016/j.actamat.2004.11.002 ↗
20. Sursaeva V, Straumal B (2005) Materialwiss Werkstofftech 36:52810.1002/mawe.200500929 ↗
21. Upit GP, Varchenya SA (1973) In: Westbrook JH, Conrad H (eds) The science of hardness testing and its research applications. ASM International, p 135
22. Durst K, Backes S, Goeken M (2005) Scripta Mater 52:109310.1016/j.scriptamat.2005.02.009 ↗
23. Yang B, Vehoff H (2007) Acta Mater 55:84910.1016/j.actamat.2006.09.004 ↗
24. Varchenya SA, Muktepavel FO, Upit GP (1970) Phys Stat Sol (a) 1:K16510.1002/pssa.19700010429 ↗
25. Nix WD, Gao HJ (1998) J Mech Phys Sol 46:41110.1016/S0022-5096(97)00086-0 ↗