Amorphous and nano crystalline phase formation in Ni2MnGa ferromagnetic shape memory alloy synthesized by melt spinning
Source abstract
Abstract
Melt spinning technique was used to synthesize Ni2MnGa ferromagnetic shape memory alloy ribbons. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) analysis of the ribbon synthesized at lower wheel speed (20 m/s) reveal the formation of very fine clusters of austenitic phase of Ni2MnGa. However at higher wheel speed (30 m/s) the formation of martensite and nanoparticles of Ni2MnGa with a size range of 10–20 nm in the amorphous matrix is observed. Also an amorphous phase was observed at higher wheel speed in some areas of the ribbon. Annealing (1000 °C, 1 h) of the ribbon synthesized at higher wheel speed resulted in martensite and γ (gamma) phases. Amorphous phase, Ni2MnGa nanoparticles, and the martensite phase are analyzed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Creativity in Education and Neuroscience · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Herlach DM (1994) Mater Sci Eng R 12:17710.1016/0927-796X(94)90011-6 ↗
2. Smith CH (1993) In: H. Liebermann (ed) Rapidly solidified alloys: process, structure, properties and applications. Marcel Decker, New York, ISBN 0-8247-8951-210.1201/9781482233995 ↗
3. Jones H et al (2001) Mater Sci Eng A 11–19:304
4. Ullakko K et al (1996) Appl Phys Lett 69:196610.1063/1.117637 ↗
5. Richard ML et al (2007) Phil Mag 87:343710.1080/14786430701297582 ↗
6. Ge Y (2007) The crystal and magnetic microstructure of Ni-Mn-Ga alloys. Doctoral thesis, ISBN 978-951-22-8661-4
7. Hakola A (2006) Thin-film deposition using laser ablation: application to ferromagnetic shape-memory materials and methods for spatial shaping of laser beams. Doctoral thesis, ISBN 951-22-8282-8
8. Prasad RVS, Phanikumar G (2009) Material Science forum: proceedings of the 5th international conference on solidification and gravity held at Miskolc-Lillafüred, Hungary (to be published)
9. Lanska N et al (1995) J Appl Phys 12:8074
10. Flemings MC (1974) Solidification processing. McGraw-Hill, New York10.1007/BF02643923 ↗
11. Rama Rao NV et al (2007) Scripta Mater 56:40510.1016/j.scriptamat.2006.10.037 ↗
12. Niklasch D, Dadda J et al (2008) J Mater Sci 43:6890. doi:https://doi.org/10.1007/s10853-008-2997-z10.1007/s10853-008-2997-z ↗
13. Gruner ME, Entel P, Opahle I et al (2008) J Mater Sci 43:3825. doi:https://doi.org/10.1007/s10853-007-2291-510.1007/s10853-007-2291-5 ↗
14. Liu JY, Lu H, Chen JM et al (2008) J Mater Sci 43:4921. doi:https://doi.org/10.1007/s10853-008-2716-910.1007/s10853-008-2716-9 ↗
15. Gialanella S, Ischia et al (2008) J Mater Sci 43:1701. doi:https://doi.org/10.1007/s10853-007-2358-310.1007/s10853-007-2358-3 ↗
16. Gibson MA et al (1988) J Mater Sci 23:1164. doi:https://doi.org/10.1007/BF0115457410.1007/BF01154574 ↗
17. Haddad-S M, Amberg G (1993) Int J Rapid Solidif 7:255–267
18. Liebermann HH (1979) IEEE Trans Mag 15(6):139310.1109/TMAG.1979.1060429 ↗
19. Pons J et al (2000) Acta Mater 48:302710.1016/S1359-6454(00)00130-0 ↗
20. Renhui W et al (2002) Acta Mater 50:183510.1016/S1359-6454(02)00035-6 ↗
21. Ma Y et al (2007) Acta Mater 55:153310.1016/j.actamat.2006.10.014 ↗