journal article·2014-10

Design and preparation of high-performance amine-based poly(ether ketone)s with strong photonic luminescence

Guanjun Chang, Li Yang, Junxiao Yang, Runxiong Lin

Journal of Materials Science· Volume 49· Issue 20
Publisher page

Abstract

Amine-based poly(ether ketone)s (A-PEKs), as novel high-performance functional polymers, have been obtained by the polycondensation of dibromo ketones with aromatic ether diamines via palladium-catalyzed aryl amination reaction. The structures of the polymers are characterized by means of FT-IR, 1H NMR spectroscopy and elemental analysis, the results show a good agreement with the proposed structures. DSC and TGA measurements exhibit that polymers possess high glass transition temperature (T g ≥ 175 °C) and good thermal stability with high decomposition temperatures (T 5 ≥ 400 °C). Based on the hydrogen bonds between the polymer chains, thin films of A-PEKs show great mechanical behaviors with high tensile strength up to 89.5 Mpa. In addition, due to the photoinduced intramolecular charge-transfer (ICT) of A-PEKs, these synthesized polymers are endowed with significantly strong photonic luminescence in N,N′-dimethylformamide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Shukla D, Negi Y, Uppadhyaya J, Kumar V (2012) Synthesis and modification of poly(ether ether ketone) and their properties: a review. Polym Rev 52:189–22810.1080/15583724.2012.668151 ↗
2. Heo Y, Im H, Kim J (2013) The effect of sulfonated graphene oxide on sulfonated poly(ether ether ketone) membrane for direct methanol fuel cells. J Membr Sci 425–426:11–2210.1016/j.memsci.2012.09.019 ↗
3. Chen D, Hickner M (2012) Degradation of imidazolium- and quaternary ammonium-functionalized poly (fluorenyl ether ketone sulfone) anion exchange membranes. ACS Appl Mater Interfaces 4:5775–578110.1021/am301557w ↗
4. Fortney A, Fossum E (2012) Soluble, semi-crystalline PEEK analogs based on 3,5-difluorobenzophenone: synthesis and characterization. Polymer 53:2327–233310.1016/j.polymer.2012.03.056 ↗
5. Liu B, Hu W, Chen C, Jiang Z, Zhang W, Wu Z, Matsumoto T (2004) Soluble aromatic poly(ether ketone)s with a pendant 3,5-ditrifluoromethylphenyl group. Polymer 45:3241–324710.1016/j.polymer.2004.03.015 ↗
6. Liu Y, Jian X, Liu S (2001) Synthesis and properties of novel poly(phthalazinone ether ketone ketone). J Appl Polym Sci 82:823–82610.1002/app.1912 ↗
7. Wang J, Gao Y, Hlil A, Hay A (2008) Synthesis of high molecular weight poly(phthalazinone ether)s by ullmann C−N and C−O condensation reactions. Macromolecules 41:298–30010.1021/ma702039a ↗
8. Okuda H, Koyama Y, Kojima T, Takata T (2013) 9,9-Diaryl-4,5-diazafluorene-based cardo polymer; synthesis and characteristic properties. J Polym Sci A 51:4541–454910.1002/pola.26870 ↗
9. Chang G, Luo X, Zhang L, Lin R (2007) Synthesis of novel high-performance polymers via pd-catalyzed amination of dibromoarenes with primary aromatic diamines. Macromolecules 40(24):8625–863010.1021/ma070679s ↗
10. Chang G, Yang L, Yang J, Huang Y, Cao K, Zhang L, Lin R (2013) Synthesis of poly(imino imino ketone) (PIIK) and preparation of heat resistant PIIK foam. Polymer 54:5043–504910.1016/j.polymer.2013.07.009 ↗
11. Chang G, Xu Y, Zheng Y, Zhang L (2014) Intermolecular hydrogen bonding of poly(imino imino ketone ketone). J Macromol Sci B 53:749–75510.1080/00222348.2013.857556 ↗
12. Kim D, Cho H, Ki C (2000) Blue light emitting polymers. Prog Polym Sci 25:1089–113910.1016/S0079-6700(00)00034-4 ↗
13. Akcelrud L (2003) Electroluminescent polymers. Prog Polym Sci 28:875–96210.1016/S0079-6700(02)00140-5 ↗
14. Liou G, Lin K (2009) Synthesis and characterization of a novel electrochromic aromatic polyamide from AB-type triphenylamine-based monomer. J Polym Sci Part A 47:1988–200310.1002/pola.23286 ↗
15. Liou G, Hsiao S, Huang N, Yang Y (2006) Synthesis, photophysical, and electrochromic characterization of wholly aromatic polyamide blue-light-emitting materials. Macromolecules 39:5337–534610.1021/ma0608469 ↗
16. Chang G, Yang L, Yang J, Huang Y, Cao K, Zhang L, Lin R (2013) Facile synthesis of soluble aromatic poly(amide amine)s via C–N coupling reaction: characterization, thermal, and optical properties. J Polym Sci A Polym Chem 51:4845–485210.1002/pola.26910 ↗
17. Kung Y, Lee W, Hsiao S, Liou G (2011) New polyimides incorporated with diphenylpyrenylamine unit as fluorophore and redox-chromophore. J Polym Sci A 49:2210–222110.1002/pola.24652 ↗
18. Sundar S, Sangeetha D (2012) Investigation on sulphonated PEEK beads for drug delivery, bioactivity and tissue engineering applications. J Mater Sci 47:2736–2742. doi: 10.1007/s10853-011-6100-910.1007/s10853-011-6100-9 ↗
19. Zalinska B, LeistenO Reaney I (2014) Fabrication of multilayer dielectrically loaded antennas using aqueous electrophorectic deposition of polyether ether ketone. J Mater Sci 49:4121–4126. doi: 10.1007/s10853-014-8106-610.1007/s10853-014-8106-6 ↗
20. Shu W, Buchwald SL (2011) Use of precatalysts greatly facilitate palladium-catalyzed alkynylations in batch and continuous-flow conditions. Chem Sci 2:2321–232510.1039/c1sc00409c ↗
21. Morimoto H, Tsubogo T, Litvinas ND, Hartwig JF (2011) A broadly applicable copper reagent for trifluoromethylations and perfluoroalkylations of aryl iodides and bromides. Angew Chem Int Ed Engl 50(16):3793–379810.1002/anie.201100633 ↗
22. Pan F, Peng F, Jiang Z (2007) Diffusion behavior of benzene/cyclohexane molecules in poly (vinyl alcohol)-graphite hybrid membranes by molecular dynamics simulation. Chem Eng Sci 62:703–71010.1016/j.ces.2006.07.046 ↗
23. Teraoka I. Polymer Solutions (2002) chapter 2: Thermodynamics of Dilute Polymer Solutions. Wiley New York, PP:69–108
24. Burroughes J, Bradley D, Brown A, Marks R, Mackay K, Friend R, Burn P, Holmes A (1990) Light-emitting diodes based on conjugated polymers. Nature 347:539–54110.1038/347539a0 ↗
25. Kraft A, Grimsdale A, Holmes A (1998) Electroluminescent conjugated polymers—seeing polymers in a new light. Angew Chem Int Ed Engl 110:402–42810.1002/(SICI)1521-3773(19980302)37:4<402::AID-ANIE402>3.0.CO;2-9 ↗
26. Zhang Q, Li J, Shizu K, Huang S, Hirata S, Miyazaki H, Adachi C (1012) Design of efficient thermally activated delayed fluorescence materials for pure blue organic light emitting diodes. J Am Chem Soc 134:14706–1470910.1021/ja306538w ↗
27. Liou G, Chang C (2008) Highly stable anodic electrochromic aromatic polyamides containing N, N, N′, N′-Tetraphenyl-p-Phenylenediamine moieties: synthesis, electrochemical, and electrochromic properties. Macromolecules 41:1667–167410.1021/ma702146h ↗