journal article·2009-12

Organic solvent treatment and physicochemical properties of nanoporous polymer–SBA-15 composite materials

Magali Wainer, Louis Marcoux, Freddy Kleitz

Journal of Materials Science· Volume 44· Issue 24
Publisher page

Abstract

Mesoporous polymer–silica composites are attractive new materials because these systems can combine the advantages of highly porous silica and the vast functional diversity of organic polymers in a single robust structure. This contribution deals with the effects of organic solvent treatment on the physicochemical properties of mesostructured polymer–SBA-15 silica nanocomposites. For this study, two distinct reference mesoporous nanocomposites were prepared using a previously reported surface-confined polymerization technique, e.g., poly(styrene)(PS)–SBA-15 composite and poly(2-hydroxyethyl methacrylate)(PHEMA)–SBA-15 composite. The resulting materials are treated either with chloroform or toluene under heating for a prolonged period of time (24 h). Both materials are characterized prior and after solvent treatment by nitrogen physisorption at −196 °C, thermogravimetry and Attenuated Total Reflection Infra-Red (ATR-IR) spectroscopy. In general, solvent stability is excellent for both types of composite, even for low cross-linking degree of the polymer. Our data reveal that a treatment of mesoporous PHEMA–SBA-15 with chloroform or toluene has a minor, but reproducible, effect on the composite material in terms of porosity. Here, a reorganization of the polymer layer–silica interface seems to occur to some extent, which is leading to slight variation of the intrawall porosity. As a consequence, an increase of the thermal stability is clearly observed, with, however, no marked difference in the mean mesopore diameter. On the other hand, the PS–SBA-15 composite treated with the same solvents shows higher specific surface area values and an improved homogeneity in terms of polymer coating compared to untreated materials, especially for composites synthesized using benzoyle peroxide as the polymerization initiator. However, no increase in thermal stability is observed in this case.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mesoporous Materials and Catalysis · Metal-Organic Frameworks: Synthesis and Applications · Covalent Organic Framework Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Beck JS, Vartuli JC, Roth WJ, Leonowicz ME, Kresge CT, Schmitt KD, Chu CTW, Olson DH, Sheppard EW, McCullen SB, Higgins JB, Schlenker JL (1992) J Am Chem Soc 114:1083410.1021/ja00053a020 ↗
2. Zhao D, Huo Q, Feng J, Chmelka BF, Stucky GD (1998) J Am Chem Soc 120:602410.1021/ja974025i ↗
3. Ying JY, Mehnert CP, Wong MS (1999) Angew Chem Int Ed 38:5610.1002/(SICI)1521-3773(19990115)38:1/2<56::AID-ANIE56>3.0.CO;2-E ↗
5. Taguchi A, Schuth F (2005) Microporous Mesoporous Mater 77:110.1016/j.micromeso.2004.06.030 ↗
6. Tiemann M (2007) Chem Eur J 13:837610.1002/chem.200700927 ↗
7. Hartmann M (2005) Chem Mater 17:457710.1021/cm0485658 ↗
8. Vallet-Regi M, Balas F, Arcos D (2007) Angew Chem Int Ed 46:754810.1002/anie.200604488 ↗
9. Wight AP, Davis ME (2002) Chem Rev 102:358910.1021/cr010334m ↗
10. Kickelbick G (2004) Angew Chem Int Ed 43:310210.1002/anie.200301751 ↗
11. Yoshitake H (2005) New J Chem 29:110710.1039/b504957a ↗
12. Hoffmann F, Cornelius M, Morell J, Fröba M (2006) Angew Chem Int Ed 45:321610.1002/anie.200503075 ↗
13. Stein A (2003) Adv Mater 15:76310.1002/adma.200300007 ↗
14. Wu CC, Bein T (1994) Science 264:175710.1126/science.264.5166.1757 ↗
15. Moller K, Bein T, Fischer RX (1998) Chem Mater 10:184110.1021/cm980020o ↗
16. Cho MS, Choi HJ, Kim KY, Ahn WS (2002) Macromol Rapid Commun 123:71310.1002/1521-3927(20020801)23:12<713::AID-MARC713>3.0.CO;2-Y ↗
17. Acosta EJ, Carr CS, Simanek EE, Shantz DF (2004) Adv Mater 16:98510.1002/adma.200306323 ↗
18. Molenkamp WC, Watanabe M, Miyata H, Tolbert SH (2004) J Am Chem Soc 126:447610.1021/ja039296+ ↗
19. Rosenholm JM, Penninkangas A, Linden M (2006) Chem Commun 390910.1039/B607886A ↗
20. Choi M, Kleitz F, Liu D, Lee HY, Ahn WS, Ryoo R (2005) J Am Chem Soc 127:192410.1021/ja044907z ↗
21. Zhang Y, Zhao L, Lee SS, Ying JY (2006) Adv Synth Catal 348:202710.1002/adsc.200600240 ↗
22. Zhang L, Abbenhuis HCL, Gerritsen G, Bhriain NN, Magusin PCMM, Mezari B, Han W, van Santen RA, Yang Q, Li C (2007) Chem Eur J 13:121010.1002/chem.200600752 ↗
23. Fuertes AB, Tartaj P (2007) Small 3:27510.1002/smll.200600487 ↗
24. Tian BS, Yang C (2009) J Phys Chem C 113:435710.1021/jp8106149 ↗
25. Marcoux L, Kim TW, Bilodeau S, Kleitz F (2007) Stud Surf Sci Catal 170:183610.1016/S0167-2991(07)81067-6 ↗
26. Choi M, Heo W, Kleitz F, Ryoo R (2003) Chem Commun 134010.1039/B303696K ↗
27. Ravikovitch PI, Neimark AV (2001) J Phys Chem B 105:681710.1021/jp010621u ↗
28. Thommes M (2004) Nanoporous materials; science and engineering. ICP, London, UK
29. Rosenholm JM, Czuryszkiewicz T, Kleitz F, Rosenholm JB, Lindén M (2007) Langmuir 23:431510.1021/la062450w ↗
30. Galarneau A, Cambon H, Di Renzo F, Ryoo R, Choi M, Fajula F (2003) New J Chem 27:7310.1039/b207378c ↗
31. Aydin B, Bilodeau S, Hamidipour M, Larachi F, Kleitz F (2008) Ind Eng Chem Res 47:256910.1021/ie071579d ↗
32. Boulet-Audet M, Lefevre T, Buffeteau T, Pezolet M (2008) Appl Spec 62:95610.1366/000370208785793380 ↗
33. Landry CT, Coltrain BK, Wesson JA, Zumbulyadis N, Lippert JL (1992) Polymer 33:149610.1016/0032-3861(92)90127-I ↗
34. Onida B, Allian M, Borello E, Ugliengo P, Garrone E (1997) Langmuir 13:510710.1021/la9703860 ↗
35. Levchik GF, Si K, Levchik SV, Camino G, Wilkie CA (1999) Polym Degrad Stab 65:39510.1016/S0141-3910(99)00028-2 ↗
36. Van Krevelen DW (1975) Polymer 16:61510.1016/0032-3861(75)90157-3 ↗