journal article·2007-10

The electrochemical behaviour of nitrogen-containing austenitic stainless steel in methanolic solution

V. B. Singh, Monali Ray

Journal of Materials Science· Volume 42· Issue 19
Publisher page

Abstract

The corrosion behaviour of nitrogen-containing austenitic stainless steel in methanol containing different concentrations of H2SO4, HCl, LiCl and H2SO4 + HCl has been investigated using a potentiostatic polarization method. The cathodic reaction in the H2SO4, HCl and H2SO4 + HCl solutions was proton reduction whereas in the neutral LiCl solution, oxygen reduction was the predominant cathodic reaction. Active, passive and transpassive behaviours were observed only for higher concentrations of H2SO4 (0.01–2.0 M) due to the inherent water content. A cathodic loop, characterized by measured negative current in the anodic region, was also observed in solutions, in which the concentration of H2SO4 was 1.0 M or higher. The relative stability of the passive films decreased as the H2SO4 concentration increased, and thus the steel suffered from mild pitting corrosion. In the chloride environment, the rate of corrosion increased as the Cl− ion concentration increased. The presence of acid along with Cl− ions enhanced corrosion, and the corrosion rate increased significantly. The steel suffered from mild intergranular corrosion in acidic chloride solutions of methanol. In the H2SO4 + HCl solutions, passive films were only formed when the H2SO4 to HCl concentration ratio was greater than ∼10:1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Vanini AS, Audouard JP, Marcus P (1994) Corros Sci 36:182510.1016/0010-938X(94)90021-3 ↗
2. Flis J, Kuczynska M (2004) J Electrochem Soc 151:B57310.1149/1.1801352 ↗
3. Leckie HP, Uhlig HH (1966) J Electrochem Soc 113:126210.1149/1.2423801 ↗
4. Hermas AA, Ogura K, Takagi S, Adachi T (1995) Corrosion 51:310.5006/1.3293575 ↗
5. Bandy R, Van Rooyen D (1983) Corrosion 39:22710.5006/1.3580841 ↗
6. Bayoumi FM, Ghanem WA (2005) Mater Lett 59:331110.1016/j.matlet.2005.05.063 ↗
7. Mudali UK, Reynders B, Stratmann M (1999) Corros Sci 41:17910.1016/S0010-938X(98)00115-2 ↗
8. Tsai WT, Reynders B, Stratmann M, Grabke HJ (1993) Corros Sci 34:164710.1016/0010-938X(93)90038-I ↗
9. Clayton CR, Halada P, Kearns R (1995) Mater Sci Eng A 198:13510.1016/0921-5093(95)80068-6 ↗
10. Pawlick LA, Kelly RG (1995) J Corros Sci Eng 1:15
11. Singh VB, Upadhyay BN (1998) Corros Sci 40:70510.1016/S0010-938X(97)00172-8 ↗
12. Singh VK, Singh VB (1988) Corros Sci 28:38510.1016/0010-938X(88)90058-3 ↗
13. Singh VB, Gupta A (2005) Ind J Chem Tech 12:347
14. Keller P, Strehblow HH (2004) Corros Sci 46:193910.1016/j.corsci.2004.01.007 ↗
15. Wilde BE, Hodge FG (1969) Electrochim Acta 14:61910.1016/0013-4686(69)87044-1 ↗
16. Rozenfeld IL (1981) Corrosion 37:37110.5006/1.3577288 ↗
17. Greene ND (1960) J Electrochem Soc 107:457110.1149/1.2427718 ↗
18. Lee JW, Osseo-Asare K, Pickering HW (1985) J Electrochem Soc 132:55010.1149/1.2113885 ↗
19. Frankenthal RP (1967) J Electrochem Soc 114:54210.1149/1.2426646 ↗
20. Hermas AA, Ogura K, Adachi T (1995) Electrochim Acta 40:83710.1016/0013-4686(94)00365-8 ↗
21. Mazza F, Torchio S, Ghislandi N (1984) In: Proceedings of the 9th international congress on metallic corrosion, Toronto, vol. I, p 102
22. Szklarska -Smialowska Z, Mankowski J (1982) Corros Sci 22:110510.1016/0010-938X(82)90097-X ↗
23. Umebayashi R, Akao N, Hara N, Sugimoto K (2003) J Electrochem Soc 150:B29510.1149/1.1574808 ↗
24. Zhang YS, Zhu XM (1999) Corros Sci 41:181710.1016/S0010-938X(99)00017-7 ↗
25. Yang WP, Costa D, Marcus P (1994) J Electrochem Soc 141:266910.1149/1.2059166 ↗
26. Asami K, Hashimoto K, Musumoto T, Shimodaira S (1976) Corros Sci 16:90910.1016/S0010-938X(76)80010-8 ↗
27. Clayton CR, Olefjord I (2002) In: Corrosion mechanism in theory and practice. Marcel Dekker, New York, p 21710.1201/9780203909188.ch7 ↗
28. Mansfeld F (1973) J Electrochem Soc 120:18810.1149/1.2403418 ↗
29. El-Naggar MM (2006) Applied Surf Sci R52:617910.1016/j.apsusc.2005.08.025 ↗
30. Szklarska-Smialowska Z (1984) In: Proceedings of the 9th international congress on metallic corrosion, Toronto, vol. II, p 112
31. Tromans D, Ahmed T (1998) J Electrochem Soc 145:60110.1149/1.1838310 ↗
32. Cerquetti A, Mazza F (1973) Corros Sci 13:33710.1016/0010-938X(73)90037-1 ↗
33. Badawy WA, Ismail KM, Fathi M (2005) Electrochim Acta 50:360310.1016/j.electacta.2004.12.030 ↗
34. Pistorius PC, Burstein GT (1992) Corros Sci 33:188510.1016/0010-938X(92)90191-5 ↗
35. Van Muylder J, Dezoubov N, Pourbaix M (1962) Report 101, CEBELCOR, Brussels, Belgium
36. Ujiro T, Satoh S, Staehle RW, Smyrl WH (2001) Corros Sci 43:218510.1016/S0010-938X(01)00008-7 ↗
37. Ogura S, Sugimoto K, Sawada Y (1976) Corros Sci 16:32310.1016/0010-938X(76)90118-9 ↗
38. Singh DDN, Gaur B, Ghosh R, Singh BK (1998) NML Tech J 40:77
39. Carranza RM, Alvarez MG (1996) Corros Sci 38:90910.1016/0010-938X(96)00176-X ↗
40. Barbucci A, Cerisola G, Cabot PL (2002) J Electrochem Soc 149:B53410.1149/1.1516774 ↗