journal article·2003-06

Metalorganic chemical vapor deposition of SrRuO3 thin film and its characterization

Hung-Chih Lee, Dah-Shyang Tsai

Journal of Materials Science· Volume 38· Issue 12
Publisher page

Abstract

Synthesis of conducting oxide strontium ruthenate is carried out in a hot-wall tubular reactor, using Sr(C11H19O2)2/Ru(C5H5)2/O2 reaction system. Owing to a large difference in depositing efficiency between strontium and ruthenium precursors, the stoichiometric ratio of thin film is controlled in one cycle of two consecutive depositions at different temperatures. Thin films of SrRuO3 single phase are synthesized in the subsequent 700°C annealing. Thin films of SrRuO3 with extra ruthenium oxide can also be prepared by adjusting the molar ratio of RuO2 and SrO layers. The deposition sequence of ruthenium oxide first, strontium oxide later is preferred. If the deposition sequence is reverse, the thin film is plagued with unreacted oxides even when the annealing temperature is raised to 800°C. The relative ease of preparing SrRuO3 thin films, when RuO2 is under SrO, is attributed to evaporation of ruthenium oxide in O2 and diffusion in its open columnar microstructure. The sheet resistivity of thin film decreases with the ruthenium content. The room temperature resistivity of SrRuO3 film of Ru/(Sr + Ru) = 0.5 is around 910 μohm-cm. The room-temperature resistivity of Ru/(Ru + Sr) = 0.53 decreases to 470 μohm-cm. The root mean square surface roughness of 700°C synthesized SrRuO3 thin film is 22 nm, in a 2 × 2 μm2 area of film thickness 280 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Condensed Matter Physics · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K. Fujioka, J. Okamoto, T. Mizokawa, A. Fujimori, I. Hase, M. Abbate, H. J. Lin, C. T. Chen, Y. Takeda and M. Takano, Phys. Rev. B 56 (1997) 6380.10.1103/PhysRevB.56.6380 ↗
2. P. B. Allen, H. Berger, O. Chauvet, L. Forro, T. Jarlborg, A. Junod, B. Revaz and G. Santi, ibid. 53 (1996) 4393.10.1103/PhysRevB.53.4393 ↗
3. G. Cao, S. McCall, M. Shepard and J. E. Crow, ibid. 56 (1997) 321.10.1103/PhysRevB.56.321 ↗
4. J. Lin, K. Natori, Y. Fukuzumi, M. Izuha, K. Tsunoda, K. Eguchi, K. Hieda and D. Matsunaga, Appl. Phys. Lett. 76 (2000) 2430.10.1063/1.126366 ↗
5. Z. R. Dai, S. Y. Son, B. S. Kim, D. K. Choi and F. S. Ohuchi, Mater. Res. Bull. 34 (1999) 933.10.1016/S0025-5408(99)00091-4 ↗
6. M. Izuha, K. Abe and N. Fukushima, Jpn. J. Appl. Phys. 36 (1997) 5866.10.1143/JJAP.36.5866 ↗
7. T. Morimoto, O. Hidaka, K. Yamakawa, O. Arisumi, H. Kanaya, T. Iwamoto, Y. Kumura, I. Kunishima and S. Tanaka, ibid. 39 (2000) 2110.10.1143/JJAP.39.2110 ↗
8. M. Kobune, O. Matsuura, T. Matsuzaki and A. Mineshige, ibid. 39 (2000) 5451.10.1143/JJAP.39.5451 ↗
9. T. Nishida, S. Okamura, T. Shiosaki, S. Fujita and Y. Masuda, ibid. 38 (1999) 5337.10.1143/JJAP.38.5337 ↗
10. Q. X. Jia, F. Chu, C. D. Adams, X. D. Wu, M. Hawley, J. H. Cho, A. T. Findikoglu, S. R. Foltyn, J. L. Smith and T. E. Mitchell, J. Mater. Res. 11 (1996) 2263.10.1557/JMR.1996.0287 ↗
11. C. B. Eom, R. J. Cava, R. M. Fleming, J. M. Phillips, R. B. van Dover, J. H. Marshall, J. W. P. Hsu, J. J. Krajewski and W. F. Peck, Science 258 (1992) 1766.10.1126/science.258.5089.1766 ↗
12. R. Breitkopf, L. J. Meda, T. Haas and R. U. Kirss, in Proceedings of Materials Research Society (1998) Vol. 495, p. 51.10.1557/PROC-495-51 ↗
13. J. P. Mercurio, J. H. Yi, M. Manier and P. Thomas, J. Alloys and Compounds 308 (2000) 77.10.1016/S0925-8388(00)00907-5 ↗
14. N. Okuda, K. Saito and H. Funakubo, Jpn. J. Appl. Phys. 39 (2000) 572.10.1143/JJAP.39.572 ↗
15. W. C. Shin and S. G. Yoon, J. Electrochem. Soc. 144 (1997) 1055.10.1149/1.1837530 ↗
16. J. H. Ahn, W. Y. Choi, W. J. Lee and H. G. Kim, Jpn. J. Appl. Phys. 37 (1998) 284.10.1143/JJAP.37.284 ↗
17. S. Trasatti and W. E. O'Grady, in “Advances in Electrochemistry and Electrochemical Engineering”, edited by H. Gerischer and C.W. Tobias (Wiley-Interscience, NewYork, 1981) p. 184.
18. P. C. Liao, S. Y. Mar, W. S. Ho, Y. S. Huang and K. K. Tiong, Thin Solid Films 287 (1996) 74.10.1016/S0040-6090(96)08761-5 ↗
19. R. S. Chen, Y. S. Huang, Y. L. Chen and Y. Chi, ibid. 413 (2002) 85.10.1016/S0040-6090(02)00343-7 ↗
20. K. Watanabe, M. Ami and M. Tanaka, Mater. Res. Bull. 32 (1997) 83.10.1016/S0025-5408(96)00165-1 ↗
21. X. D. Wu, S. R. Foltyn, R. C. Dye, Y. Coulter and R. E. Muenchausen, Appl. Phys. Lett. 62 (1993) 2434.10.1063/1.109388 ↗
22. R. J. Bouchard and J. L. Gillson, Mater. Res. Bull. 7 (1972) 873.10.1016/0025-5408(72)90075-X ↗