journal article·2012-02

Tensile properties and fracture behaviour of an ultrafine grained Ti–47Al–2Cr (at.%) alloy at room and elevated temperatures

V. N. Nadakuduru, D. L. Zhang, B. Gabbitas, Y. L. Chiu

Journal of Materials Science· Volume 47· Issue 3
Publisher page

Abstract

An ultrafine grained (UFG) Ti–47Al–2Cr (at.%) alloy has been synthesized using a combination of high energy mechanical milling and hot isostatic pressing (HIP) of a Ti/Al/Cr composite powder compact. The material produced has been tensile tested at room temperature, 700 and 800 °C, respectively, and the microstructure of the as-HIPed material and the microstructure and fracture surfaces of the tensile tested specimens have been examined using X-ray diffractometry, optical microscopy, scanning electron microscopy and transmission electron microscopy. The alloy shows no ductility during tensile testing at room temperature and 700 °C, respectively, but very high ductility (elongation to fracture 70–100%) when tensile tested 800 °C, indicating that its brittle to ductile transition temperature (BDTT) falls within the temperature range of 700–800 °C. The retaining of ultrafine fine equiaxed grain morphology after the large amount of plastic deformation of the specimens tensile tested at 800 °C and the clear morphology of individual grains in the fractured surface indicate that grain boundary sliding is the predominant deformation mechanism of plastic deformation of the UFG TiAl based alloy at 800 °C. Cavitation occurs at locations fairly uniformly distributed throughout the gauge length sections of the specimens tensile tested at 800 °C, again supporting the postulation that grain boundary sliding is the dominant mechanism of the plastic deformation of the UFG TiAl alloys at temperatures above their BDTT. The high ductility of the UFG alloy at 800 °C and its fairly low BDTT indicates that the material a highly favourable precursor for secondary thermomechanical processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Djanarthany S, Viala JC, Bouix J (2001) Mater Chem Phys 72:30110.1016/S0254-0584(01)00328-5 ↗
2. Morris MA, Leboeuf M (1997) Mater Sci Eng A 239:42910.1016/S0921-5093(97)00613-8 ↗
3. Imayev R, Shagiev M, Salishchev G, Imayev V, Valitov V (1996) Scripta Mater 34:98510.1016/1359-6462(95)00604-4 ↗
4. Imavey VM, Salishchev GA, Shagiev MR, Kuznetsov AV, Imavey RM, Senkov ON, Froes FH (2001) Mater Sci Eng A 300:26310.1016/S0921-5093(00)01813-X ↗
5. Haanappel VAC, Clemens H, Stroosnijder MF (2002) Intermetallics 10:29310.1016/S0966-9795(01)00137-6 ↗
6. Rishel LL, Biery NE, Raban R, Gandelsman VZ, Pollock TM, Cramb AW (1998) Intermetallics 6:62910.1016/S0966-9795(98)00042-9 ↗
7. Gerling R, Clemens H, Schimansky FP (2004) Adv Eng Mater 6:2310.1002/adem.200310559 ↗
8. Hsiung LM, Nieh TG (2004) Mater Sci Eng A 364:110.1016/S0921-5093(02)00639-1 ↗
9. Wegmann G, Gerling R, Schimansky FP, Clemens H, Bartels A (2002) Intermetallics 10:51110.1016/S0966-9795(02)00026-2 ↗
10. Shagiev MR, Senkov ON, Salishchev GA, Froes FH (2000) J Alloy Compd 313:20110.1016/S0925-8388(00)01167-1 ↗
11. Yang SH, Kim MS, Kim WY, Chiba A (2003) J Metastab Nanocryst Mater 15–16:37310.4028/www.scientific.net/JMNM.15-16.373 ↗
12. Maziasz PJ, Liu CT (1998) Metall Mater Trans A 29:10510.1007/s11661-998-0163-5 ↗
13. Thomas M, Raviart JL, Popoff F (2005) Intermetallics 13:94410.1016/j.intermet.2004.12.010 ↗
14. Yu HB, Zhang DL, Chen YY, Cao P, Gabbitas B (2009) J Alloy Compd 474:10510.1016/j.jallcom.2008.06.069 ↗
15. Chen YY, Yu HB, Zhang DL, Chai LH (2009) Mater Sci Eng A 525:16610.1016/j.msea.2009.06.056 ↗
16. Bohn R, Klassen T, Bormann R (2001) Intermetallics 9:55910.1016/S0966-9795(01)00039-5 ↗
17. Liu CT, Schneibe JH, Maziasz PJ, Wright JL, Easton DS (1996) Intermetallics 4:42910.1016/0966-9795(96)00047-7 ↗
18. Kim YW (1995) Mater Sci Eng A 192/193:51910.1016/0921-5093(94)03271-8 ↗
19. Wu Y, Li XW, Zhou SX, Hwang SK (2007) J Iron Steel Res Int 14:10410.1016/S1006-706X(08)60061-8 ↗
20. Dimiduck DM (1999) Mater Sci Eng A 263:28110.1016/S0921-5093(98)01158-7 ↗
21. Gerling R, Schimansky FP, Clemens H (2003) Wear 249:566
22. Wang GX, Dahms M (1993) J Mater Perform 45:52
23. Beddoes J, Zhao L, Au P, Wallace W (1995) Mater Sci Eng A 192/193:32410.1016/0921-5093(94)03214-9 ↗
24. Clemens H, Glatz W, Appel F (1996) Scr Mater 35:42910.1016/1359-6462(96)00143-1 ↗
25. Shagiev MR, Senkov ON, Salishchev GA, Froes FH (2000) J Alloy Compd 313:20110.1016/S0925-8388(00)01167-1 ↗