journal article·2014-09

Tensile behaviour of multi-layered braided structures

Harshvardhan Saraswat, Amit Rawal, Rajendra Singh

Journal of Materials Science· Volume 49· Issue 18
Publisher page

Abstract

Multi-layered braided structures are formed as a result of over-braiding the previously formed braids and they are increasingly being used for numerous applications ranging from hoses to energy absorbing composites. In this research work, a series of multi-layered braided structures were prepared on circular braiding machine for obtaining various combinations of braid angles of 30° and 45° in inner and outer layers. Subsequently, the tensile properties of multi-layered braided structures were analysed and it was found that the braid angle in the outer layer has significantly affected the stress–strain behaviour. A simple analytical model for predicting the tensile behaviour of multi-layered braided structures has also been proposed based on the previously developed model of ‘braid-elastic core’ system. A clear distinction has also been made between the helix and braid angles. Furthermore, a comparison has been made between theoretical and experimental values of braid angle, toughness and stress–strain characteristics of multi-layered braided structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Bannister M (2001) Challenges for composites into the next millennium—a reinforcement perspective. Compos Part A 32:901–91010.1016/S1359-835X(01)00008-2 ↗
2. Potluri P, Rawal A, Rivaldi M, Porat I (2003) Geometrical modelling and control of a triaxial braiding machine for producing 3D preforms. Compos Part A 34:481–49210.1016/S1359-835X(03)00061-7 ↗
3. Drouin G, Dore R, Thiry PS (1980) Modelling of a composite prosthesis for quasi-cylindrical ligaments. Trans ASME 102:194–19810.1115/1.3244259 ↗
4. Steven D, Swanek S, Carey J (2007) Braided composite materials for the production of lightweight, high rigidity golf shafts. Sport Eng 10:195–20810.1007/BF02933571 ↗
5. Laurent CP, Durville D, Mainard D, Ganghoffer JF, Rahouadj R (2012) A multilayer braided scaffold for anterior cruciate ligament: mechanical modeling at the fiber scale. J Mech Behav Biomed Mater 12:184–19610.1016/j.jmbbm.2012.03.005 ↗
6. Dinh JS, Eibs TE, Logan JB, Patel MR, Peterson AA, Polley WF (1997) Braids for the reinforcement of catheter. Euro Patent EP19970201366
7. Rawal A, Potluri P, Steele C (2005) Geometrical modeling of the yarn paths in 3-dimensional braided structures. J Ind Text 35:115–13510.1177/1528083705057574 ↗
8. Harte AM, Fleck NA, Ashby MF (2000) Energy absorption of foam-filled circular tubes with braided composite walls. Eur J Mech A/Solids 19:31–5010.1016/S0997-7538(00)00158-3 ↗
9. Audysho R, Smith R, Altenhof W, Patel K (2014) Aluminum foam core density and geometry influences on the deformation mechanisms of foam filled braided tubular structures in tension. Mater Design 54:394–41310.1016/j.matdes.2013.08.030 ↗
10. Backer S, Hsu P (1985) Structures with partial frictional constraints. In: Proceedings third Japan-Australia joint symposium on objective measurement: application to product design and process control, Kyoto, Japan, 563
11. Wu HC, Seo MH, Backer S, Mandell JF (1995) Structural modeling of double-braided synthetic fiber ropes. Text Res J 65:619–63110.1177/004051759506501101 ↗
12. Seo MH, Wu HC, Chen J, Toomey CS, Backer S (1997) Wear and fatigue of nylon and polyester mooring lines. Text Res J 67:467–48010.1177/004051759706700701 ↗
13. Phoenix SL (1978) Mechanical response of a tubular braided cable with an elastic core. Text Res J 48:81–9110.1177/004051757804800204 ↗
14. Abbott GM (1984) Force-extension behavior of helically wrapped elastic core yarns. Text Res J 54:204–22310.1177/004051758405400311 ↗
15. Hopper RH, Grant JW Jr, Popper P (1995) Mechanics of a hybrid circular braid with an elastic core. Text Res J 65:709–72210.1177/004051759506501202 ↗
16. Rawal A, Saraswat H, Kumar R (2013) Tensile response of tubular braids with an elastic core. Compos Part A 47:150–15510.1016/j.compositesa.2012.12.006 ↗
17. Potluri P, Manan A, Francke M, Day RJ (2006) Flexural and torsional behaviour of biaxial and triaxial braided composite structures. Compos Struct 75:377–38610.1016/j.compstruct.2006.04.046 ↗
18. Hearle JWS, Grosberg P, Backer S (1969) Structural mechanics of fibres yarns and fabrics. Wiley interscience, New York
19. Lomov SV, Verpoest I, Peeters T, Roose D, Zako M (2003) Nesting in textile laminates: geometrical modelling of the laminate. Compos Sci Technol 63:993–100710.1016/S0266-3538(02)00318-4 ↗
20. Endruweit A, Long AC (2011) A model for the in-plane permeability of triaxially braided reinforcements. Compos Part A 42:165–17210.1016/j.compositesa.2010.11.003 ↗
21. Alderson KL, Alderson A, Evans KE (1997) The interpretation of the strain-dependent Poisson’s ratio in auxetic polyethylene. J Strain Anal 32:201–21210.1243/0309324971513346 ↗
22. Harte AM, Fleck NA (2000) On the mechanics of braided composites in tension. Eur J Mech A/Solids 19:259–27610.1016/S0997-7538(99)00164-3 ↗