Improvement of alkali corrosion resistance of mullite ceramics at high temperature by depositing Ca0.3Mg0.2Zr2(PO4)3 coating
Source abstract
Abstract
Ca0.3Mg0.2Zr2(PO4)3 coating was deposited on the mullite ceramic to improve its alkali corrosion resistance at high temperatures, using sol–gel method and dip-coating technique. The phase composition and microstructure of the coating were characterized by X-ray diffraction and scanning electron microscopy (SEM). Results show that homogeneous, dense and single-phase Ca0.3Mg0.2Zr2(PO4)3 coating was successfully deposited on mullite ceramics. SEM microstructural examination revealed the excellent bonding between Ca0.3Mg0.2Zr2(PO4)3 coating and mullite ceramics. The effectiveness of the prepared coating to improve the alkali corrosion resistance of mullite ceramics was assessed through the measurements of mass loss and flexural strength degradation after 96 h and longer exposure time at alkali corrosion condition at 1000 °C. A significant enhancement of the alkali corrosion resistance for Ca0.3Mg0.2Zr2(PO4)3-coated mullite samples was observed. Therefore, the effectiveness of the Ca0.3Mg0.2Zr2(PO4)3 material as protection coating for mullite ceramic is confirmed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Akira O (2008) J Eur Ceram Soc 28:109710.1016/j.jeurceramsoc.2007.09.016 ↗
2. Alvin MA (1996) Ind Eng Chem Res 35:338410.1021/ie960128i ↗
3. Lippert TE, Lane JE (1991) Am Ceram Soc Bull 70:1491
4. Fredericci C, Morelli MR (2000) Mater Res Bull 35:250310.1016/S0025-5408(00)00462-1 ↗
5. Aksel C (2003) Ceram Int 29:30510.1016/S0272-8842(02)00137-2 ↗
6. Moya JS, Steier HP, Requena J (1999) Composites Part A 30:43910.1016/S1359-835X(98)00132-8 ↗
7. Fritsch M, Klemm H, Herrmann M, Schenk B (2006) J Eur Ceram Soc 26:355710.1016/j.jeurceramsoc.2006.01.015 ↗
8. Hirata T, Ota S, Morimoto T (2003) J Eur Ceram Soc 23:9110.1016/S0955-2219(02)00078-X ↗
9. Jacobson NS, Opila EJ, Lee KN (2001) Curr Opin Solid State Mater Sci 5:30110.1016/S1359-0286(01)00009-2 ↗
10. Takahashi J, Kawai Y, Shimada S (1998) J Eur Ceram Soc 18:112110.1016/S0955-2219(98)00007-7 ↗
11. Takahashi J, Kawai Y, Shimada S (2002) J Eur Ceram Soc 22:195910.1016/S0955-2219(01)00529-5 ↗
12. Jacobson NS, Lee KN, Yoshio T (1996) J Am Ceram Soc 79:216110.1111/j.1151-2916.1996.tb08951.x ↗
13. Ueno S, Jayaseelan DD, Ohji T (2004) Int J Appl Ceram Technol 1:36210.1111/j.1744-7402.2004.tb00187.x ↗
14. Lee KN (2000) Surf Coat Technol 133–134:1
15. Lee KN, Miller RA (1996) Surf Coat Technol 86–87:14210.1016/S0257-8972(96)03074-5 ↗
16. Schneider H, Schreuer J, Hildmann B (2008) J Eur Ceram Soc 28:32910.1016/j.jeurceramsoc.2007.03.017 ↗
17. Li TK, Hirschfeld DA, Vanaken S (1993) J Mater Res 8:295410.1557/JMR.1993.2954 ↗
18. Russ WM (1994) Master’s Thesis, Department of Materials Science and Engineering, Virginia Tech
19. Breval E, Mckinstry HA, Agrawal DK (2000) J Mater Sci 35:3359. doi: https://doi.org/10.1023/A:100482891790810.1023/A:1004828917908 ↗
20. Jacques L (1997) Curr Opin Solid State Mater Sci 2:13210.1016/S1359-0286(97)80057-5 ↗
21. Duckworth W (1953) J Am Ceram Soc 36:6810.1111/j.1151-2916.1953.tb12838.x ↗