Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel
Source abstract
Abstract
Detailed studies are conducted on the microstructural evolution and mechanical behavior of a high strength low alloy (HSLA) steel processed by warm multi-axial forging (MAF). After nine MAF strain steps, the initial ferrite grains of average 13-μm size reduced to submicron-sized grains with over 0.7 fraction of high angle grain boundaries. Pearlitic cementite is fragmented and refined to about 50–100 nm size particles. The microstructure evolution with respect to fraction of HAGB with increase in number of strain steps is more sluggish in HSLA steel as compared to plain carbon steel of comparable carbon content. This is ascribed to the Zener pinning effect of (Ti, Nb) carbide particles. Tensile strength and hardness values of MAFed steel increased by more than 45 and 58 %, respectively, after nine warm MAF strain steps, whereas the fracture strain was reduced from 21 to 12 %.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Prog Mater Sci 45:10310.1016/S0079-6425(99)00007-9 ↗
2. Zhu YT, Langdon TG (2004) JOM 56:5810.1007/s11837-004-0294-0 ↗
3. Bowen JR, Prangnell PB, Humphreys FJ (2000) Mater Sci Technol 16:124610.1179/026708300101507208 ↗
4. Langdon TG (2009) Mater Sci Eng A 503:6–910.1016/j.msea.2007.09.106 ↗
5. Lim SM, Wahabi ME, Desrayaud C, Montheillet F (2007) Mater Sci Eng A 460–461:53210.1016/j.msea.2007.01.106 ↗
6. Mironov SY, Salishchev GA, Myshlyaev MM, Pippan R (2006) Mater Sci Eng A 418:25710.1016/j.msea.2005.11.026 ↗
7. Majta J, Muszka K (2007) Mater Sci Eng A 464:18610.1016/j.msea.2007.01.135 ↗
8. Abdollah-Zadeh A, Eghbali B (2007) Mater Sci Eng A 457:21910.1016/j.msea.2006.12.022 ↗
9. Padap AK, Chaudhari GP, Nath SK (2010) J Mater Sci 45:4837. doi: 10.1007/s10853-010-4430-710.1007/s10853-010-4430-7 ↗
10. Salishchev GA, Valiakhmetov OR, Galeyev RM (1993) J Mater Sci 28:2898. doi: 10.1007/BF0035469210.1007/BF00354692 ↗
11. Chowdhury SG, Mondal A, Gubicza J, Krallics G, Fodor A (2008) Mater Sci Eng A 490:33510.1016/j.msea.2008.01.049 ↗
12. Hahn H, Mondal P, Padmanabhan KA (1997) Acta Metall 9:603
13. Song R, Ponge D, Raabe D (2005) Acta Mater 53:488110.1016/j.actamat.2005.07.009 ↗
14. Padap AK, Chaudhari GP, Pancholi V, Nath SK (2010) Mater Des 31:381610.1016/j.matdes.2010.03.030 ↗
15. Hodgson PD, Hickson MR, Gibbs RK (1999) Scripta Mater 40:117910.1016/S1359-6462(98)00411-4 ↗
16. Liu M, Shi B, Bi G, Cao H, Cai X, Song H (2003) Mater Sci Eng A 360:10110.1016/S0921-5093(03)00406-4 ↗
17. Hickson MR, Hodgson PD (1999) Mater Sci Technol 15:8510.1179/026708399773003358 ↗
18. Park KT, Kim YS, Lee JG, Shin DH (2000) Mater Sci Eng A 293:16510.1016/S0921-5093(00)01220-X ↗
19. Ko YG, Shin DH, Park KT, Lee CS (2006) Scripta Mater 54:178510.1016/j.scriptamat.2006.01.034 ↗
20. Lee CS, Ko YG, Shin DH, Park KT (2006) Scripta Mater 54:785