Crystal plasticity-based finite element analysis of deformation and fracture of polycrystalline lamellar γ-Tial + α2-Ti3al alloys
Source abstract
Abstract
Deformation behavior of fully-lamellar polycrystalline γ-TiAl + α2-Ti3Al alloys has been analyzed using a finite element method. A three-dimensional rate-dependent, finite-strain, crystal-plasticity based materials constitutive model is used to represent the deformation behavior of the bulk material. The constitutive behavior of γ-TiAl/γ-TiAl lamellar interfaces and lamellae-colony boundaries, on the other hand, are modeled using a cohesive-zone formulation. The interface/boundary potentials used in this formulation are determined through the use of atomistic simulations of the interface/boundary decohesion. The constitutive relations for both the γ-TiAl + α2-Ti3Al bulk material and the lamellar interfaces and colony boundaries are implemented in the commercial finite element program Abaqus/Standard within which the material state is integrated using an Euler-backward implicit formulation. The results obtained show that plastic flow localizes into deformation bands even at an overall strain level of only 0.5% and that incompatibilities in plastic flow between the adjacent colonies can give rise to high levels of the hydrostatic stress and, in turn, to intercolony fracture. Furthermore, it is found that when lamellar interfaces are admitted into colonies, fracture is delayed and the materials fail in a more gradual manner.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M. Yamaguchi and Y. Umakoshi, Prog. Mater. Sci. 34 (1990) 1.10.1016/0079-6425(90)90002-Q ↗
2. L. A. Johnson, D. P. Pope and J. O. Stiegler (eds.), High-temperature Ordered Intermetallic Alloys IV, Materials Research Society Symposium Proceedings, Pittsburgh, Pennsylvania, Vol. 213, 1991.
3. S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (eds.), “High-temperature Aluminides and Intermetallics,” The Minerals, Metals and Materials Society, Warrendale, PA, 1990.
4. T. Fujiwara, A. M. Nakamura, M. Hosomi, S. R. Nishitani, Y. Shirai and M. Yamaguchi, Phil. Mag. A 61 (1990) 591.10.1080/01418619008231937 ↗
5. Y. W. Kim, Acta Metall. Mater. 40 (1992) 1121.10.1016/0956-7151(92)90411-7 ↗
6. T. Nakano, A. Yokoyama and Y. Umakoshi, Scripta Metall. 27 (1992) 1253.10.1016/0956-716X(92)90066-N ↗
7. B. K. Kad, M. Dao and R. J. Asaro, Phil. Mag. A 71 (1995) 567.10.1080/01418619508244469 ↗
8. “Abaqus/Standard 5.8 User Manual” (Hibbit, Karlsson & Sorenson, Inc., Providence, R.I., 1998).
9. C. Teodosiu and F. Sidoroff, International Journal of Engineering Science 14 (1976) 165.10.1016/0020-7225(76)90085-9 ↗
10. R. J. Asaro and J. R. Rice, Journal of the Mechanics and Physics of Solids 25 (1977) 309.10.1016/0022-5096(77)90001-1 ↗
11. M. Dao, B. K. Kad and R. J. Asaro, Phil. Mag. A 74 (1996) 569.10.1080/01418619608243529 ↗
12. B. J. Lee, B. K. Kad and R. J. Asaro, Scripta Metall 29 (1993) 823.10.1016/0956-716X(93)90234-J ↗
13. M. Grujicic and S. Batchu, J. Mater. Sci. 36 (2001) 2581.10.1023/A:1017915006660 ↗
14. A. Needelman, J. Appl. Mech. 54 (1987) 525.10.1115/1.3173064 ↗
15. M. Grujicic and S. G. Lai, J. Mater. Sci. 33 (1998) 4385.
16. M. S. Daw and M. I. Baskes, Phys. Rev. Lett. 50 (1983) 1285.10.1103/PhysRevLett.50.1285 ↗
17. Idem., Phys. Rev. B 29 (1984) 6443.10.1103/PhysRevB.29.6443 ↗
18. D. Farkas, private communication.
19. M. Grujicic and P. Dang, Mater. Sci. Engng. A 224 (1997) 187.10.1016/S0921-5093(96)10540-2 ↗
20. Idem., J. Mater. Sci. 32 (1997) 4875.10.1023/A:1018611921183 ↗
21. M. Grujicic and S. G. Lai, ibid. 33 (1998) 4401.10.1023/A:1004441129440 ↗
22. M. Grujicic and Y. Zhang, ibid. A 265 (1999) 285.
23. Idem., ibid. 34 (1999) 1419.10.1023/A:1004585912992 ↗
24. R. Fletcher and C. M. Reeves, Comput. J. 7 (1964) 149.10.1093/comjnl/7.2.149 ↗
25. P. Villars and L. O. Calvert, “Pearson's Handbook of Crystallographic Data for Intermetallic Phases,” Vol. 2 (American Society for Metals, Metals Park, OH, 1985).
26. S. Socrate, Ph.D. thesis, MIT, Cambridge, MA, 1996.
27. G. Bozzolo, I. Farrante and J. R. Smith, Scripta Metall. 25 (1991) 1927.10.1016/0956-716X(91)90330-4 ↗
28. C. Teodosiu, in Proceedings of the Conference on Fundamental Aspects of Dislocation Theory, edited by R. Simmons, J. A. DeWit and R. Bullough (McMillan, London, 1970) p. 837.
29. R. Hill and J. R. Rice, Journal of the Mechanics and Physics of Solids 20 (1972) 401.10.1016/0022-5096(72)90017-8 ↗
30. J. Mandel, in Proceedings of the International Symposium on Foundations of Continuum Thermodynamics, edited by D. Domingos, J. J. Nina and J. H. Whitlaw (McMillan, London, 1974) p. 283.
31. R. J. Asaro, ASME Journal of Applied Mechanics 50 (1983) 921.10.1115/1.3167205 ↗
32. U. F. Kocks, A. S. Argon and M. F. Ashby, Progress in Material Science 19 (1975) 1.10.1016/0079-6425(75)90005-5 ↗
33. H. J. Frost and M. F. Ashby, “Deformation Mechanism Maps” (Pergamon Press, New York, 1982).
34. A. S. Argon, in “Physical Metallurgy,” edited by R. W. Cahn and P. Haasen (Elsevier, Amsterdam, 1995).
35. H. Inui, Y. Toda and M. Yamaguchi, Phil. Mag. A 67 (1993) 1315.10.1080/01418619308225357 ↗