Cyclic indentation of an elastic-perfectly plastic material
Source abstract
Abstract
Fundamental knowledge of the indentation deformation of materials is critical to evaluating dynamic behavior of materials in using the indentation technique. Early studies on the contact of materials provided analytical treatments for both elastic [1–6] and plastic response [7] subjected to dynamic loading. Despite valuable insight into the indentation deformation of materials from analytical approaches, it is difficult to apply these methods in the analysis of the indentation of elastoplastic materials. Consequently, numerical techniques [8–10] were advanced to account for complicated geometries and to establish realistic models. The review of literature indicates that the majority of analytical and numerical solutions of various indentation problems involving elastic and elastoplastic materials have focused on the contact deformation under quasi-static conditions. The obtained solutions might not be applicable to dynamic indentation problems. This has imposed a challenge for using the technique of continuous stiffness measurement to characterize dynamic deformation of thin films and nanoscale structures, which bases on atomic force microscopy and nanoindentation. The purpose of this work is to use finite element to simulate the dynamic indentation of an elastic-perfectly plastic material by a rigid cylindrical indenter of flat-end. The simulation results will shed a light on understanding dynamic indentation problems as encountered in most nanoindentation tests. In the
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Pekeris CL (1955) Proc Natl Acad Sci USA 41:46910.1073/pnas.41.7.469 ↗
2. Lamb H (1904) Phil Trans Royal Soc A203:110.1098/rsta.1904.0013 ↗
3. Miller GF, Pursey H (1954) Proc Royal Soc A223:52110.1098/rspa.1954.0134 ↗
4. Arnold RN, Bycroft CN, Warburton GB (1955) Trans ASME J Appl Mech 22:39110.1115/1.4011096 ↗
5. Robertson IA (1966) Proc Cambridge Phil Soc 62:54710.1017/S0305004100040184 ↗
6. Gladwell GML (1968) J Sound Vibr 8:21510.1016/0022-460X(68)90228-9 ↗
7. Tirupataiah Y, Sundararajan G (1991) J Mech Phys Solids 39:24310.1016/0022-5096(91)90005-9 ↗
8. Lu J, Suresh S, Ravichandran G (2003) J Mech Phys Solids 51:192310.1016/j.jmps.2003.09.007 ↗
9. Yang FQ, Li JCM, Shih CW (1995) Mater Sci Eng A 201:5010.1016/0921-5093(95)09763-5 ↗
10. Yang FQ (1998) Int J Mech Sci 40:8710.1016/S0020-7403(97)00035-0 ↗
11. Chakrabarty J (2006) Theory of Plasticity. 3rd edn. Butterworth-Heinemann, New York
12. ABAQUS users manual version 5.3, Hibbitt, Karlsson, Sorensen, Inc., Providence, Rhode Island, USA (1994)
13. Bhattacharya AK, Nix WD (1988) Inter J Solids Struc 24:88110.1016/0020-7683(88)90039-X ↗
14. Li JCM, Chu SNG (1979) Script Metall 13:102110.1016/0036-9748(79)90196-0 ↗