Room and high temperature tensile behaviour of a P/M 2124/MoSi2 composite at different heat treatment conditions
Source abstract
Abstract
In the present work, a 2124/15 vol%MoSi2 composite was obtained by powder metallurgy. Its microstructure and mechanical properties were investigated at room and at high temperature (up to 200°C) in conditions T351, T4 and after heat treatments at 495°C for up to 100 h. Up to 150°C, tensile properties of 2124/MoSi2 in T351 resulted similar to those of a ceramic reinforced 2124/SiC composite. Yield stress of the 2124/MoSi2 material, after heating at 495°C for up to 100 h, resulted higher than that of the monolith 2124 alloy heated for the same periods. No diffusion reaction phases were formed surrounding the MoSi 2 reinforcing particles during such long exposures to high temperature. Only at 100 h, large plate-like precipitates that contain Al, Cu, Mg and Si appeared. The high thermal stability of this 2124/MoSi2 composite and its good mechanical properties at room and at elevated temperature makes MoSi2 intermetallic a competitor of ceramic reinforcements. © 2006 Springer Science + Business Media, Inc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. H. OMURA, T. MIYOSHI, Y. TAKAHASHI, J. G. CONLEY and M. YODOGAWA, in: Y-W. Kim W. M. Griffith (Eds.), in “Dispersion Strenthened Aluminium Alloys” (TMS, Warrendale, Pennsylvania, 1988) p. 421.
2. R. A. VARIN, Z. Metallkd. 81 (1990) 373.
3. M. METELNICK and R. A. VARIN, Z. Metallkd. 82 (1991) 346.
4. A. RUUTOPOLD, Z. WRONSKI and R. A. VARIN, Mater. Sci. Eng. A 98 (1988) 547.10.1016/0025-5416(88)90227-3 ↗
5. S. LEE, S. CHOO and M. RHEE, Metall. Mater.Trans. 28A (1997) 2773.10.1007/s11661-997-0037-2 ↗
6. C. DíAZ, J. L. GONZáLEZ-CARRASCO, G. CARUANA and M. LIEBLICH, Metall. Mater. Trans. 27A (1996)3259.10.1007/BF02663876 ↗
7. M. LIEBLICH, J. L. GONZáLEZ-CARRASCO and G. CARUANA, Intermetallics 5 (1997) 515.10.1016/S0966-9795(97)00027-7 ↗
8. J. M. TORRALBA, V. LANCAU, M. A. MARTíNEZ and F. VELASCO, J. Mater. Sci. Lett. 19 (2000) 1509.10.1023/A:1006700400804 ↗
9. B. TORRES, Y. WANG, M. LIEBLICH, J. IBáñEZ, W. M. RAINFORTH and H. JONES, Z. Metallkd. 92 (2001) 604.
10. J. L. GONZáLEZ-CARRASCO, F. GARCíA-CANO, G. CARUANA and M. LIEBLICH, Mater. Sci. Eng. A 183 (1994) L5.10.1016/0921-5093(94)90914-8 ↗
11. Y. WANG, W. M. RAINFORTH, H. JONES and M. LIEBLICH, Wear 251 (2001) 1421.10.1016/S0043-1648(01)00783-9 ↗
12. B. TORRES, M. LIEBLICH, J. IBáñEZ and A. GARCíA-ESCORIAL, Scripta Metall. 47 (2002) 45.10.1016/S1359-6462(02)00095-7 ↗
13. W. M. ZHONG, G. L. L’ESPéRANCE and M. SUéRY, Metall. Mater. Trans. 26A (1995) 2637.10.1007/BF02669421 ↗
14. D. X. SUN and Y. Y. ZHAO, Materials Letters. 59 (2005) 6.10.1016/j.matlet.2004.05.034 ↗
15. Y. Q. LIU, G. SHAO and P. TSAKIROPOULOS, Intermetallics 9 (2001) 125.10.1016/S0966-9795(00)00114-X ↗
16. D. J. LLOYD, Inter. Mater. Rew. 39 (1994) 1.10.1179/095066094790150982 ↗
17. T. S. SRIVATSAN, J. Mater. Sci. 31 (1996) 1375.10.1007/BF00353120 ↗
18. B. TORRES, in PhD Thesis (Universidad Complutense, Madrid, 2002) 5-I.
19. J. R. DAVIS, in “ASM Speciality Handbook, Aluminum and Aluminum alloys” (ASM International, The Materials Information Society, 1994) p. 660.
20. B. DUBOST, J. BOUVAIST and M. REBOUL, in Proceedings of the International Conference on Aluminium Alloys, Charlottsville, VA, Vol. II (1986) 1109.
21. BROOKS CHARLIE R., in “ASM Handbook, 4 Heat Treating” (ASM International, 1997) 841.
22. R. CHEN, A. IWABUCHI, T. SHIMIZU, H. SEOP SHIN and H. MIFUNE, Wear 213 (1997) 175.10.1016/S0043-1648(97)00123-3 ↗
23. R. L. FLEISCHER, R. D. FIELD, K. K. DENIKE and R. J. ZABALA, Metall. Trans. 21A (1990) 3063.10.1007/BF02647304 ↗
24. S. R. SRINIVASAN and R. B. SCHWARZ, J. Mater. Res. 7 (1992) 1610.10.1557/JMR.1992.1610 ↗
25. J. A. HOOKER and P. J. DOORBAR, Mater. Sci.Tech. 16 (2000) 725.10.1179/026708300101508414 ↗
26. D. L. MCDANELS, Metall. Trans. A 16A (1985) 1105.10.1007/BF02811679 ↗
27. R. ANGERS, M. R. KRISHNADEV, R. TREMBLAY, J. F. CORRIVEAU and D. DUBE, Mater. Sci. Eng. A 262 (1999) 9.10.1016/S0921-5093(98)01030-2 ↗
28. B. YU, S. S. KIM and M. W. PARK, J. Mater. Sci. Lett. 10 (2000) 1025.10.1023/A:1006730801630 ↗
29. S. V. NAIR, J. K. TIEN and R. C. BATES, Inter. Metal. Rew. 30 (1985) 275.10.1179/095066085790150054 ↗
30. T. S. SRIVATSAN, J. Mater. Sci. 31 (1996) 1375.10.1007/BF00353120 ↗