High-damping and high-rigidity composites of Al2TiO5–MgTi2O5 ceramics and acrylic resin
Source abstract
Abstract
High-damping materials are widely used in engineering fields. In order to increase the precision of vibration control to different levels, high-damping materials with high-rigidity are required. This study attempts to develop a new high-damping high-rigidity material using ductile ceramics based on the Al2TiO5–MgTi2O5 system, which has many continuous microcracks along the grain boundaries. Ductile ceramics have high internal friction (Q−1 = 0.01–0.037), but very low rigidity (<10 GPa). The rigidity of Al2TiO5–MgTi2O5 ceramics was improved by combining them with a polymer such as acrylic resin. The Young’s modulus and internal friction of the composites of Al2TiO5–MgTi2O5 ceramics and acrylic resin are investigated. They show high-damping capacity (Q−1 = 0.03–0.04) with high rigidity (E = 50–60 GPa), and their properties depend on those of the polymer. Thus, the composites fabricated using the above method can serve as high-damping high-rigidity materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Igata N (2004) Kinzoku 74:237
2. Kawahara K, Yin F (2003) Seishin Corp Technical Report
3. Kawahara K (2006) Key Eng Mat 319:21710.4028/www.scientific.net/KEM.319.217 ↗
4. Igata N, Nishiyama K, Ota K, Yin Y, Wuttig W, Golovin IS, Humbeeck JV, San Juan J (2003) J Alloys Compd 355:23010.1016/S0925-8388(03)00235-4 ↗
5. Sugimoto K (1974) Trans Iron Steel Inst Jpn 60:220310.2355/tetsutohagane1955.60.14_2203 ↗
6. Hedley JA (1968) Metall Sci J 2:12910.1179/030634568790443206 ↗
7. Yin F, Ohsawa Y, Satoh A, Kawahara K (1998) Z Metallkd 89:481
8. Fukuhara M, Yin F, Ohsawa Y, Takamori S (2006) Mater Sci Eng A 442:43910.1016/j.msea.2006.05.163 ↗
9. Fantozzi G (2001) In: Schaller R, Fantozzi G, Gremaud G (eds) Mechanical spectroscopy of Q−1 2001: with applications to materials science. Mater science forum. Trans Tech Pub. Ltd., Zürich, p 3
10. Matsushita K, Kuratani S, Okamoto T, Shimada M (1984) J Mater Sci Lett 3:34510.1007/BF00729393 ↗
11. Pezzotti G, Ota K (1997) J Ceram Soc Jpn 105:110.2109/jcersj.105.1 ↗
12. Basu B, Donzel L, Van Humbeeck J, Vleugets J, Schaller R, Van Der Biest O (1999) Scr Mater 40:75910.1016/S1359-6462(99)00012-3 ↗
13. Pezzotti G, Ota K (1998) Phys Rev B 58:1188010.1103/PhysRevB.58.11880 ↗
14. Takata S, Ueno S, Kawakami Y, Akatsu T, Tanabe Y, Yasuda E, Waku Y (2001) J Ceram Soc Jpn 109:56110.2109/jcersj.109.1270_561 ↗
15. Nishimura H, Ikuhara Y, Ota K, Pezzotti K (2002) Mater Trans 43:155210.2320/matertrans.43.1552 ↗
16. Sato S, Serizawa H, Araki H, Noda T, Kohyama A (2003) J Alloys Compd 355:14210.1016/S0925-8388(03)00252-4 ↗
17. Matsushita K, Okamoto T, Shimada M (1985) J Phys 46:549
18. Fang QF, Liu T, Li C, Wang XP, Zhang GG (2006) Key Eng Mater 319:16710.4028/www.scientific.net/KEM.319.167 ↗
19. Fantozzi G, Bourim EM, Kazemi S (2006) Key Eng Mater 319:15710.4028/www.scientific.net/KEM.319.157 ↗
20. Lambrinou K, Van der Biest O, Lube T, Tassini N, Patsias S, Chalvet F, Portu G (2007) J Eur Ceram 27:130710.1016/j.jeurceramsoc.2006.04.124 ↗
21. Shimazu T, Miura M, Isu N, Ogawa T, Ichikawa A, Ishida EH (2006) Proceedings of 3rd water dynamics, Sendai, Japan, p 69
22. Shimazu T, Miura M, Kuno H, Isu N, Ota K, Ishida EH (2006) Key Eng Mater 319:17310.4028/www.scientific.net/KEM.319.173 ↗
23. Shimazu T, Miura M, Isu N, Ogawa T, Ota K, Maeda H, Ishida EH (2008) Mater Sci Eng A 487:34010.1016/j.msea.2007.10.026 ↗
24. Ashby MF (1992) Materials selection in mechanical design. Pergamon Press Ltd, Oxford, p 109
25. Berezhnoi AS, Gul’ko NV (1955) Ukrain Khim Zhur 21(2):158
26. Cleveland JJ, Bradt RC (1978) J Am Ceram Soc 61:47810.1111/j.1151-2916.1978.tb16121.x ↗
27. Boden P, Glasser FP (1973) Trans J Br Ceram Soc 72:215
28. Bayer G (1971) J Less-Common Met 24:12910.1016/0022-5088(71)90091-9 ↗
29. Morosin B, Lynch RW (1972) Acta Cryst B28:104010.1107/S0567740872003681 ↗
30. Zhang J, Perez RJ, Lavernia EJ (1993) J Mater Sci 28:2395. doi: https://doi.org/10.1007/BF0115167110.1007/BF01151671 ↗
31. Maekawa Z, Hamada H, Gotoh A, Miyake K (1992) Proceedings of 35th Japan congress on materials research, p 177
32. Daimon K (1990) J Ceram Soc Jpn 98:36510.2109/jcersj.98.365 ↗
33. Kawaharav K, Yin F (1999) J Vac Soc Japan 42:1110.3131/jvsj.42.11 ↗