journal article·2005-08

Morphological, mechanical and thermal properties of nylon 6/ABS blends using glycidyl methacrylate-methyl methacrylate copolymers

E. M. Araú Jo, E. Hage, A. J. F. Carvalho

Journal of Materials Science· Volume 40· Issue 16
Publisher page

Abstract

Nylon6 is an attractive polymer for engineering applications because it has reactive functionality through amine and carboxyl end groups that are capable of reacting. For this reason, it has been used a lot in polymeric blends. Blends of nylon6/ABS (acrylonitrile-butadiene-styrene) were produced using glycidyl methacrylate-methyl methacrylate (GMA-MMA) copolymers as compatibilizer. The binary blends were immiscible and exhibited poor mechanical properties that stemmed from the unfavorable interactions among their molecular segments. This produced an unstable coarse phase morphology and weak interfaces between the phases in the solid state. The presence of the copolymer in the blends clearly led to a more efficient dispersion of the ABS phase and consequently optimized Izod impact properties. However, the compatibilized blend showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. E. M. ARAÚJO, PhD thesis, Universidade Federal de São Carlos, São Carlos, Brazil, (2001).
2. V. J. TRIACCA, S. ZIAEE, J. W. BARLOW, H. KESKKULA and D. R. PAUL, Polymer 32 (1991) 1401.10.1016/0032-3861(91)90420-N ↗
3. Y. AOKI and M. WATANABE, Polym. Eng. Sci. 32 (1992) 878.10.1002/pen.760321307 ↗
4. R. A. KUDVA, H. KESKKULA and D. R. PAUL, Polymer 39 (1998) 2447.10.1016/S0032-3861(97)00583-1 ↗
5. B. MAJUMDAR, H. KESKKULA and D. R. PAUL, ibid. 35 (1994) 3164.10.1016/0032-3861(94)90117-1 ↗
6. Idem., Polym. Prepr. 35 (1994) 850.
7. Idem., J. Polym. Sci.: Part B: Polymer Phys. 32 (1994) 2127.10.1002/polb.1994.090321219 ↗
8. E. HAGE JR., W. R. HALE, H. KESKKULA and D. R PAUL, Polymer 38 (1997) 3237.10.1016/S0032-3861(96)00879-8 ↗
9. S. P. JANG and D. KIM, Polym. Eng. Sci. 40 (2000) 1635.10.1002/pen.11295 ↗
10. B. MAJUMDAR. H. KESKKULA and D. R. PAUL, Polymer 35 (1994) 5453.10.1016/S0032-3861(05)80009-6 ↗
11. Idem., ibid. 35 (1994) 5468.
12. A. MISRA, G. SAWHNEY and R. A. KUMAR, J. Appl. Polym. Sci. 50 (1993) 1179.10.1002/app.1993.070500708 ↗
13. R. A. KUDVA, H. KESKKULA and D. R. PAUL, Polymer 40 (1999) 6003.10.1016/S0032-3861(98)00829-5 ↗
14. E. M. ARAÚJO, E. HAGE JR. and A. J. F. CARVALHO, J. Mater. Sci. 38 (2003) 3515.10.1023/A:1025648508152 ↗
15. Idem., ibid. 39 (2004) 1173.
16. W. R. HALE, H. KESKKULA and D. R. PAUL, Polymer 40 (1999) 4237.10.1016/S0032-3861(98)00670-3 ↗
17. S. H. GOH and S. Y. LEE, J. Appl. Polym. Sci. 41 (1990) 1391.10.1002/app.1990.070410703 ↗
18. J. H. KIM, H. KESKKULA and D. R. PAUL, ibid. 40 (1990) 183.10.1002/app.1990.070400115 ↗
19. Y. HUANG, Y. LIU and C. ZHAO, ibid. 69 (1998) 1505.10.1002/(SICI)1097-4628(19980822)69:8<1505::AID-APP4>3.0.CO;2-G ↗
20. J. BRANDRUP and E. H. IMMERGUT, “Polymer Handbook” 2nd ed. (John Wiley & Sons, New York, 1989).
21. Y. P. KHANNA, Macromolecules 25 (1992) 3298.10.1021/ma00038a043 ↗
22. B. C. BONSE, PhD thesis, Universidade Federal de São Carlos, São Carlos, Brazil, 1999.