Elastic properties of powders during compaction. Part 3: Evaluation of models
Source abstract
Abstract
General approaches for developing models to describe the elastic properties of granular and porous materials are discussed, with emphasis on their application to predicting the elastic properties of powders undergoing uniaxial compaction. Both particle-based, and pore-based models were considered so as to reflect the transition in compact response with decreasing porosity; being particle-dominated at high porosity, then pore-dominated at low porosity. Pore-based models were further subdivided into: mechanistic models, which consider the effects of porosity on internal mechanical fields; and geometric models, for which the elastic response is assumed to correlate with a microstructural feature (e.g. load-bearing area). A selection of models suggested in the literature, considered representative of these approaches, was applied to experimental measurements of the elastic moduli of powders during compaction. In general, the geometric pore-based models show most promise, as these are able to approximate the transition in pore character during compaction. However, further developments are required for application to uniaxially compacted powders. In particular, it is necessary to develop the ability to predict more than one elastic modulus, handle irregular powder particles, and accommodate powders comprised of brittle solid phase materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Hentschel ML, Page NW Elastic properties of powders during compaction. Part 1: Pseudo-isotropic moduli. J Mater Sci (accepted)10.1007/s10853-006-1145-x ↗
2. Hentschel ML, Page NW Elastic properties of powders during compaction. Part 2: Elastic anisotropy. J Mater Sci (accepted)10.1007/s10853-006-1394-8 ↗
3. Dean EA, Lopez JA (1983) J Am Ceram Soc 66:36610.1111/j.1151-2916.1983.tb10051.x ↗
4. Wang JC (1984) J Mater Sci 19:80110.1007/BF00540451 ↗
5. Timoshenko SP, Goodier JN (1970) Theory of elasticity, 3rd edn. McGraw-Hill, Singapore10.1115/1.3408648 ↗
6. Duffy J, Mindlin RD (1957) J Appl Mech 24:58510.1115/1.4011605 ↗
7. Deresiewicz H (1958) Adv Appl Mech 5:23310.1016/S0065-2156(08)70021-8 ↗
8. Kendall K, Alford NMCN, Birchall JD (1987) Proc R Soc Lond A 412:26910.1098/rspa.1987.0089 ↗
9. Iida K (1939) Bull Earthq Res Inst 17:783
10. Takahashi T, Satô Y (1949) Bull Earthq Res Inst Japan 27:11
11. Duffy J (1959) Trans ASME J Appl Mech 26:8810.1115/1.4011927 ↗
12. Rice RW (1998) Porosity of ceramics. Marcel Dekker, New York
13. Dantu P (1957) Proceedings of the 4th International Conference on Soil Mechanics and Foundations Engineering, vol 1. p 144
14. Liu C-H, Nagel SR, Schecter DA, Coppersmith SN, Majumdar S, Narayan O, Witten TA (1995) Science 269:51310.1126/science.269.5223.513 ↗
15. Brandt H (1955) J Appl Mech 22:47910.1115/1.4011140 ↗
16. Digby PJ (1981) J Appl Mech Trans ASME 48:80310.1115/1.3157738 ↗
17. Walton K (1987) J Mech Phys Solids 35:21310.1016/0022-5096(87)90036-6 ↗
18. Emeriault F, Chang CS (1997) J Eng Mech 123:128910.1061/(ASCE)0733-9399(1997)123:12(1289) ↗
19. Endres AL (1990) J Appl Mech Trans ASME 57:33010.1115/1.2891993 ↗
20. Chang CS, Chao SJ, Chang Y (1995) Int J Solids Struct 32:198910.1016/0020-7683(94)00225-L ↗
21. Chang CS, Liao CL (1994) Appl Mech Rev 47:S19710.1115/1.3122814 ↗
22. Dong J-J, Pan Y-W (1999) Int J Num Anal Meth Geomech 23:107510.1002/(SICI)1096-9853(199909)23:11<1075::AID-NAG24>3.0.CO;2-S ↗
23. Bathurst RJ, Rothenburg L (1988) J Appl Mech Trans ASME 55:1710.1115/1.3173626 ↗
24. Misra A, Chang CS (1993) Int J Solids Struct 30:254710.1016/0020-7683(93)90165-4 ↗
25. Kruyt NP, Rothenburg L (2001) Int J Solids Struct 38:487910.1016/S0020-7683(00)00313-9 ↗
26. Kruyt NP, Rothenburg L (1998) Int J Eng Sci 36:112710.1016/S0020-7225(98)00003-2 ↗
27. Mackenzie JK (1950) Proc Phys Soc Lond 63B:210.1088/0370-1301/63/1/302 ↗
28. Hashin Z (1962) J Appl Mech Trans ASME 29:14310.1115/1.3636446 ↗
29. Zimmerman RW (1991) Mech Mater 12:1710.1016/0167-6636(91)90049-6 ↗
30. Sayers CM, Smith RL (1982) Ultrasonics 20:20110.1016/0041-624X(82)90019-1 ↗
31. Rossi RC (1968) J Am Ceram Soc 51:43310.1111/j.1151-2916.1968.tb11914.x ↗
32. Kreher W, Ranachowski J, Rejmund F (1977) Ultrasonics 14:7010.1016/0041-624X(77)90068-3 ↗
33. Mazilu P, Ondracek G (1990) In: Herrmann KP Olesiak ZS (eds) Thermal effects in fracture of multiphase materials. Proceedings of the Euromech Colloquium 255, Oct. 31–Nov. 2, 1989. Panderburn, FRG, pp 214–226. Springer-Verlag. Berlin. (1990)10.1007/978-3-642-88479-5_22 ↗
34. Dean EA (1983) J Am Ceram Soc 66:84710.1111/j.1151-2916.1983.tb10999.x ↗
35. Zhao YH, Tandon GP, Weng GJ (1989) Acta Mech 76:10510.1007/BF01175799 ↗
36. Kachanov M, Tsukrov I, Shafiro B (1994) Appl Mech Rev 47:15110.1115/1.3122810 ↗
37. Eshelby JD (1957) Proc R Soc Lond A 241:36710.1098/rspa.1957.0133 ↗
38. Bert CW (1985) J Mater Sci 20:222010.1007/BF01112307 ↗
39. Nielsen LF (1984) J Am Ceram Soc 67:9310.1111/j.1151-2916.1984.tb09622.x ↗
40. Nielsen LF (1982) Mater Sci Eng 52:3910.1016/0025-5416(82)90068-4 ↗
41. Hill R (1963) J Mech Phys Solids 11:35710.1016/0022-5096(63)90036-X ↗
42. Hashin Z, Shtrikman S (1963) J Mech Phys Solids 11:12710.1016/0022-5096(63)90060-7 ↗
43. Balendran B, Nemat-Nasser S (1995) J Mech Phys Solids 43:182510.1016/0022-5096(95)00044-J ↗
44. Nemat-Nasser S, Hori M (1993) Micromechanics: overall properties of heterogeneous materials. Elsevier, Amsterdam10.1016/B978-0-444-89881-4.50004-9 ↗
45. Ramakrishnan N, Arunachalam VS (1993) J Am Ceram Soc 76:274510.1111/j.1151-2916.1993.tb04011.x ↗
46. Martin LP, Dadon D, Rosen M (1996) J Am Ceram Soc 79:128110.1111/j.1151-2916.1996.tb08585.x ↗
47. Rice RW (1996) In: Liu D-M (ed) Porous ceramic materials: fabrication, characterisation, applications. Trans Tech Publications, Zurich, p 1
48. Rice RW (1996) J Mater Sci 31:10210.1007/BF00355133 ↗
49. Roberts AP, Garboczi EJ (2000) J Am Ceram Soc 83:304110.1111/j.1151-2916.2000.tb01680.x ↗
50. Budiansky B (1965) J Mech Phys Solids 13:22310.1016/0022-5096(65)90011-6 ↗
51. Wu TT (1966) Int J Solids Struct 2:110.1016/0020-7683(66)90002-3 ↗
52. Mori T, Tanaka K (1973) Acta Metall 21:57110.1016/0001-6160(73)90064-3 ↗
53. Dvorak GJ, Srinivas MV (1999) J Mech Phys Solids 47:899, 220710.1016/S0022-5096(98)00067-2 ↗
54. Dunn ML, Ledbetter H (1995) J Mater Res 10:271510.1557/JMR.1995.2715 ↗
55. Luo J, Stevens R (1996) J Appl Phys 79:904710.1063/1.362638 ↗
56. Ferrari M, Filipponi M (1991) J Am Ceram Soc 74:22910.1111/j.1151-2916.1991.tb07323.x ↗
57. Ponte Castañeda P, Willis JR (1995) J Mech Phys Solids 43:191910.1016/0022-5096(95)00058-Q ↗
58. Rice RW (1996) J Mater Sci 31:150910.1007/BF00357860 ↗
59. Cytermann R (1987) Powder Metall Int 19:27
60. Phani KK, Niyogi SK (1987) J Am Ceram Soc 70:362
61. Boccaccini AR, Ondracek G, Mazilu P, Windelberg D (1993) J Mech Behav Mater 4:11910.1515/JMBM.1993.4.2.119 ↗
62. Arnold M, Boccaccini AR, Ondracek G (1996) J Mater Sci 31:164310.1007/BF00357876 ↗
63. Abdel-Ghani M, Petrie JG, Seville JPK, Clift R, Adams MJ (1991) Powder Technol 65:11310.1016/0032-5910(91)80174-H ↗
64. Skriver HL, Rosengaard NM (1992) Phys Rev B 46:715710.1103/PhysRevB.46.7157 ↗
65. Hentschel ML (2002) PhD thesis. The University of Newcastle
66. German RM (1996) Sintering theory and practice. Wiley, New York
67. Rice RW (2005) J Mater Sci 40:98310.1007/s10853-005-6517-0 ↗