Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy
Source abstract
Abstract
Commercial purity aluminum (1050) was processed via equal channel angular pressing (ECAP) to one, two, and four passes using route Bc in a 90° channel die, and subsequently compressed in plane strain in two different loading directions, and to two different strain levels. One of the plane-strain-loading directions is parallel to the ECAP forward direction, while the other is perpendicular to it. The flow response in plane-strain compression of the ECAP processed samples revealed an anisotropic behavior, one loading direction systematically gave higher flow stresses. A strain path change parameter was calculated for the two deformation schemes, to justify this anisotropic behavior. Texture evolution, of the plane-strain-compressed samples, was measured, and a transition to the rolling texture was always evidenced. The evolution of the main ideal rolling-texture components obtained from such a combination of deformation schemes, ECAP and plane-strain compression, is presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. El-Danaf EA (2008) Mater Sci Eng A 487:18910.1016/j.msea.2007.10.013 ↗
2. Iwahashi Y, Wang J, Horita Z, Nemoto M, Langdon TG (1996) Scripta Mater 35:14310.1016/1359-6462(96)00107-8 ↗
3. Zhilyaev AP, Lee S, Nurislamova GV, Valiev RZ, Langdon TG (2001) Scripta Mater 44:275310.1016/S1359-6462(01)00955-1 ↗
4. Huang Y, Prangnell PB (2008) J Mater Sci 43:7273. doi: 10.1007/s10853-008-2623-010.1007/s10853-008-2623-0 ↗
5. Berbon PB, Furukawa M, Horita Z, Nemoto M, Langdon TG (1999) Met Trans A 30A:198910.1007/s11661-999-0009-9 ↗
6. Iwahashi Y, Horita Z, Nemoto M, Langdon TG (1998) Acta Mater 46:331710.1016/S1359-6454(97)00494-1 ↗
7. Martins JP, Carvalho ALM, Padilha AF (2009) J Mater Sci 44:2966. doi: 10.1007/s10853-009-3393-z10.1007/s10853-009-3393-z ↗
8. Saiyi L, Beyerlein IJ, Alexander DJ, Vogel SC (2005) Scripta Mater 52:109910.1016/j.scriptamat.2005.02.008 ↗
9. Saiyi L, Kalidindi SR, Beyerlein J (2005) Mater Sci Eng A 410–411:207
10. Saiyi L, Beyerlein J, Alexander DJ, Vogel SC (2005) ActaMater 53:2111
11. Hoseini M, Meratian M, Li H, Szpunar JA (2008) J Mater Sci 43:4561. doi: 10.1007/s10853-008-2638-610.1007/s10853-008-2638-6 ↗
12. Hirsch J, Lucke K (1988) Acta Metall 36:286310.1016/0001-6160(88)90172-1 ↗
13. Leffers T, Ray RK (2009) Prog Mater Sci 54:35110.1016/j.pmatsci.2008.09.002 ↗
14. Terada D, Houda H, Tsuji N (2008) J Mater Sci 43:7331. doi: 10.1007/s10853-008-2809-510.1007/s10853-008-2809-5 ↗
15. Schmitt J, Aernoudt E, Baudelet B (1985) Mater Sci Eng 75:1310.1016/0025-5416(85)90173-9 ↗
16. Saiyi L (2007) Scripta Mater 56:44510.1016/j.scriptamat.2006.12.006 ↗
17. El-Danaf EA (2008) Mater Sci Eng A 492:14110.1016/j.msea.2008.03.008 ↗
18. Birol Y (2008) J Mater Sci 43:4652.doi: 10.1007/s10853-008-2663-510.1007/s10853-008-2663-5 ↗