journal article·2012-10

Effects of added kaolinite on the strength and porosity of freeze-cast kaolinite–silica nanocomposites

Wenle Li, Kathy Lu, John Y. Walz

Journal of Materials Science· Volume 47· Issue 19
Publisher page

Abstract

This paper examines the effects of kaolinite on the mechanical strength and porosity of freeze-cast kaolinite–silica composites. Measurement of the equibiaxial flexural strength shows that, after sintering at 1250 °C for 1 h, a ceramic containing 10 vol% kaolinite and 8 vol% silica has a strength that is 52 times greater than a ceramic containing only 18 vol% silica and 2.5 times greater than one containing only 18 vol% kaolinite, yet while also being 69 % porous (i.e., the porosity after sintering). It is proposed that this greater strength arises from three mechanisms. First, the kaolinite and silica particles bond together to form a connected network in which the much larger kaolinite platelets distribute the applied stress over a larger region of the sample (this increased strength is even seen in the freeze-cast green bodies before sintering). Second, X-ray diffraction measurements indicate that upon sintering at 1250 °C, new phases are formed when both silica and kaolinite are present, which we postulate contribute greatly to the strength of the composite. Third, the pore walls in samples containing both kaolinite and silica are much more continuous and unbroken than in samples containing only kaolinite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Lemaitre J, Delmon B (1977) J Mater Sci 12:2056. doi: 10.1007/BF0056197910.1007/BF00561979 ↗
2. Bellotto M, Gualtieri A, Artioli G, Clark SM (1995) Phys Chem Miner 22:20710.1007/BF00202253 ↗
3. Gualtieri A, Bellotto M, Artioli G, Clark SM (1995) Phys Chem Miner 22:21510.1007/BF00202254 ↗
4. Bulens M, Delmon B (1977) Soc Chim Belg 86:405
5. Viswabaskaran V, Gnanam FD, Balasubramanian M (2003) J Mater Process Technol 142:27510.1016/S0924-0136(03)00577-6 ↗
6. Chen CY, Lan GS, Tuan WH (2000) J Eur Ceram Soc 20:251910.1016/S0955-2219(00)00125-4 ↗
7. Liu YF, Liu XQ, Tao SW, Meng GY, Sorensen OT (2002) Ceram Int 28:47910.1016/S0272-8842(01)00120-1 ↗
8. Rezaie HR, Rainforth WM, Lee WE (1997) Br Ceram Trans 96:181
9. Li W, Lu K, Walz JY (2012) J Am Ceram Soc 95:88310.1111/j.1551-2916.2011.04908.x ↗
10. Shih K, Leckie JO (2007) J Eur Ceram Soc 27:9110.1016/j.jeurceramsoc.2006.04.176 ↗
11. Panneerselvam M, Rao KJ (2003) Chem Mater 15:224710.1021/cm0301423 ↗
12. Yang KH, Wu JH, Hsi CS, Lu HY (2011) J Am Ceram Soc 94:93810.1111/j.1551-2916.2010.04172.x ↗
13. Baharvandi HR, Hadian AM (2009) J Mater Eng Perform 18:43310.1007/s11665-008-9275-8 ↗
14. Moritz T, Richter HJ (2007) J Eur Ceram Soc 27:459510.1016/j.jeurceramsoc.2007.04.010 ↗
15. Zuo KH, Zeng YP, Jiang DL (2008) Int J Appl Ceram Technol 5:19810.1111/j.1744-7402.2008.02190.x ↗
16. Zhu XW, Jiang DL, Tan SH, Zhang ZQ (2001) J Am Ceram Soc 84:165410.1111/j.1151-2916.2001.tb00895.x ↗
17. Araki K, Halloran JW (2005) J Am Ceram Soc 88:110810.1111/j.1551-2916.2005.00176.x ↗
18. Lu AH, Schuth F (2006) Adv Mater 18:179310.1002/adma.200600148 ↗
19. Yoshikawa H, Tamai N, Murase T, Myoui A (2009) J R Soc Interface 6:S34110.1098/rsif.2008.0425.focus ↗
20. Deville S (2008) Adv Eng Mater 10:15510.1002/adem.200700270 ↗
21. Caruso F, Caruso RA, Mohwald H (1998) Science 282:111110.1126/science.282.5391.1111 ↗
22. Deville S, Saiz E, Tomsia AP (2006) Biomaterials 27:548010.1016/j.biomaterials.2006.06.028 ↗
23. Li W, Lu K, Walz JY (2010) J Am Ceram Soc 94:125610.1111/j.1551-2916.2010.04212.x ↗
24. ASTM Designation C1499–04 (2004) American society for testing and materials international, West Conshocken, PA
25. Arnold M, Boccaccini AR, Ondracek G (1996) J Mater Sci 31:1643. doi: 10.1007/BF0035787610.1007/BF00357876 ↗
26. Lobo-Guerrero S (2002) M.S. Thesis, University of Pittsburgh
27. Sofie SW, Dogan F (2001) J Am Ceram Soc 84:145910.1111/j.1151-2916.2001.tb00860.x ↗
28. Case SW, Reifsnider KL (2003) In: Ritchie RO, Murakami Y (eds) Comprehensive structural integrity, vol 4. Elsevier Pergamon, San Diego
29. Mandell F (1990) In: Reifsnider KL (ed) Composite materials series: fatigue of composites, vol 4. Elsevier, New York
30. Yoon CK, Chen IW (1990) J Am Ceram Soc 73:155510.1111/j.1151-2916.1990.tb09796.x ↗
31. Becher PF, Tiegs TN (1987) J Am Ceram Soc 70:65110.1111/j.1151-2916.1987.tb05734.x ↗