journal article·2007-07

The effect of porogen on physical properties in MTMS–BTMSE spin-on organosilicates

B. R. Kim, J. M. Son, M. J. Ko

Journal of Materials Science· Volume 42· Issue 14
Publisher page

Abstract

Decreasing the circuit dimensions is driving the need for low-k materials with a lower dielectric constant to reduce RC delay, crosstalk, and power consumption. In case of spin-on organosilicate low-k films, the incorporation of a porogen is regarded as the only foreseeable route to decrease dielectric constant of 2.2 or below by changing a packing density. In this study, methyltrimethoxysilane (MTMS)–bis(trimethoxysilyl)ethane (BTMSE) copolymers that had superior mechanical properties than MSSQ (methyl-silsesquioxane) were blended with amphiphilic block copolymers used as sacrificial pore generators. While adding up to 40 wt.% porogen into MTMS:BTMSE = 100:50 matrix, optical, electrical, and mechanical properties were measured and the pore structure was also characterized by positron annihilation lifetime spectroscopy (PALS). The result confirmed that there existed a tradeoff in attaining the low dielectric constant and desirable mechanical strength, and no more pores than necessary to achieve the dielectric objective should be incorporated. When the dielectric constant was fixed to approximately 2.3 by controlling BTMSE and porogen contents simultaneously, the thermo-mechanical properties of the porous films were also investigated for the comparison purpose. Under the same dielectric constant, the concurrent increase in BTMSE and porogen contents led to improvement in modulus measured by the nanoindentation technique but deterioration of adhesion strength obtained by the modified edge lift-off test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Muon and positron interactions and applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. International technology roadmap for semiconductors. Semiconductor Industry Association, San Jose, CA (2003)
2. Hougham G, Tesoro G, Viehbeck A, Chapple-Sokol JD (1994) Macromolecules 27:596410.1021/ma00099a006 ↗
3. Lee S, Park J-W (1996) J Appl Phys 80:526010.1063/1.363512 ↗
4. Ho S, Leu J, Morgan M, Kiene M, Zhao J-H, Hu C (2003) In: Murarka SP, Eizenberg M, Shina AK (eds) Interlayer dielectrics for semiconductor technologies. Elsevier Academic Press, London, p 167
5. Miller RD, Beyers R, Carter KR, Cook RF, Harbison M, Hawker CJ, Hedrick JL, Lee VY, Liniger E, Nguyen C, Remenar J, Sherwood M, Trollsas M, Volksen W, Yoon DY (1999) Res Mater Soc Symp Proc 565:310.1557/PROC-565-3 ↗
6. Huang QR, Volksen W, Huang E, Toney M, Frank CW, Miller RD (2002) Chem Mater 14:367610.1021/cm020014z ↗
7. Yang S, Mirau PA, Pai C-S, Nalamasu O, Reichmanis E, Pai JC, Obeng YS, Seputro J, Lin EK, Lee H-J, Sun J, Gidley DW (2002) Chem Mater 14:36910.1021/cm010690l ↗
8. Padovani AM, Riester L, Rhodes L, Allen SAB, Kohl PA (2002) J Electrochem Soc 149:F17110.1149/1.1515282 ↗
9. Toivola Y, Thurn J, Cook RF (2002) J Electrochem Soc 149:F910.1149/1.1447225 ↗
10. Liu W-C, Yu Y-Y, Chen W-C (2003) Mater Res Mater Soc Symp Proc 766:E7.1010.1557/PROC-766-E7.10 ↗
11. Toivola Y, Kim S, Cook RF, Char K, Lee J-K, Yoon DY, Rhee H-W, Kim SY, Jin MY (2004) J Electrochem Soc 151:F4510.1149/1.1643073 ↗
12. Kim BR, Kang JW, Lee KY, Son JM, Ko MJ (2007) Physical properties of low-k films based on the co-condensation of methyltrimethoxysilane with a bridged silsesquioxane. J Mater Sci. DOI 10.1007/s10853-006-0575-910.1007/s10853-006-0575-9 ↗
13. Tompkins HG (1993) A user’s guide to ellipsometry. Academic Press, Boston
14. Oliver WC, Pharr GM (1992) J Mater Res 7:156410.1557/JMR.1992.1564 ↗
15. Zhao J-H, Malik I, Ryan T, Ogawa ET, Ho PS, Shih W-Y, McKerrow AJ, Taylor KJ (1999) Appl Phys Lett 74:94410.1063/1.123417 ↗
16. Shaffer II EO, McGarry FJ, Hoang L (1996) Polym Eng Sci 36:237510.1002/pen.10635 ↗
17. Gidley DW, Frieze WE, Dull TL, Sun J, Yee AF, Nguyen CV, Yoon DY (2000) Appl Phys Lett 76:12810.1063/1.126009 ↗
18. Sun JN, Hu YF, Freize WE, Gidley DW (2003) Radiat Phys Chem 68:34510.1016/S0969-806X(03)00182-8 ↗
19. Dull TL, Frieze WE, Gidley DW, Sun JN, Yee AF (2001) J Phys Chem B 105:465710.1021/jp004182v ↗
20. Baklanov MR, Mogilnikov KP (2002) Microelectron Eng 64:33510.1016/S0167-9317(02)00807-9 ↗
21. Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties, 2nd edn. Cambridge University Press, Cambridge, MA, p 18610.1017/CBO9781139878326 ↗
22. Williford RE, Li XS, Addleman RS, Fryxell GE, Baskaran S, Birnbaum JC, Coyle C, Zemanian TS, Wang C, Courtney AR (2005) Micropor Mesopor Mater 85:26010.1016/j.micromeso.2005.06.024 ↗
23. Gross J, Fricke J (1997) J Non-Cryst Solids 95/96:1197
24. Woignier T, Reynes J, Hafidi Alaoui A, Beurroies I, Phalippou J (1999) J Non-Cryst Solids 241:4510.1016/S0022-3093(98)00747-9 ↗
25. Moner-Girona M, Roig A, Molins E, Martinez E, Esteve J (1999) Appl Phys Lett 75:65310.1063/1.124471 ↗
26. Rodriguez-Perez MA, Alonso O, Duijsens A, Saja JA (1998) J Polym Sci, Part B: Polym Phys 36:258710.1002/(SICI)1099-0488(199810)36:14<2587::AID-POLB11>3.0.CO;2-7 ↗
27. Gostein M, Mazurenko A, Maznev AA, Schulberg MT (2004) Micro 22(5):51
28. Vallery RS, Peng H-G, Frieze WE, Gidley DW, Moore DL, Carter RJ (2005) Res Mater Soc Symp Proc 863:B1.6.110.1557/PROC-863-B1.6 ↗