Studies on metallocene catalyzed copolymers of ethylene with 10- undecen- 1- ol
Source abstract
Abstract
Ethylene was copolymerized with 10-undecen-1- ol in the presence of four different metallocene catalyst systems. The copolymers were characterized by differential scanning calorimeter (DSC) and by dynamic mechanical analysis (DMA). It was demonstrated that properties of the catalysts used affected the crystallization behaviour of the copolymers because the catalysts exhibited differences in conversions of the polar comonomer. The step crystallization technique using DSC provided useful information about the differences in comonomer incorporation in the chain. The formation of multiple peaks, based on differences in ethylene sequence length, is much weaker for the copolymers produced with a non- bridged metallocene, than for polymers produced with bridged catalysts. A study of the crystallization rates in nonisothermal experiments exhibited a small decrease in crystallization temperatures with increasing branching. The Hoffman-Weeks extrapolation of melting point vs crystallization temperature gave reasonable results for silylene-bridged copolymers. In DMA, study was made of the storage modulus as an indicator of stiffness and loss tangent as a measure of the effect of branching on the β-relaxations. The DMA measurements indicated a slight increase in the flexural modulus, or stiffness values, of the copolymers relative to the corresponding homopolymers. The damping curves did not show any peaks in the β-relaxation range, which indicates that the amount of short branching in the copolymers is negligible.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. P. Aaltonen and B. LÖfgren, Macromolecules 28 (1995) 5353.10.1021/ma00119a027 ↗
2. P. Aaltonen, G. Fink, B. LÖfgren and J. SeppÄlÄ, ibid. 29 (1996) 5255.10.1021/ma951607g ↗
3. P. Aaltonen and B. LÖfgren, Eur. Pol. J. 33 (1997) 1187.10.1016/S0014-3057(97)00011-6 ↗
4. P. Aaltonen and J. SeppÄlÄ, ibid. 30 (1994) 683.10.1016/0014-3057(94)90116-3 ↗
5. J. SeppÄlÄ Idem., ibid. 31 (1995) 79.10.1016/0014-3057(94)00121-9 ↗
6. P. Aaltonen, J. SeppÄlÄ, L. Matilainen and M. LeskelÄ, Macromolecules 27 (1994) 3136.10.1021/ma00090a004 ↗
7. R. MhlhÑaupth, T. Duschek and B. Rieger,Makro-mol. Chem., Makromol. Symp. 48/49 (1991) 317.10.1002/masy.19910480123 ↗
8. B. LÖfgren and J. SeppÄlÄ, Metcon 97, Houston, USA, June 4-5, 1997.
9. E. Adisson, M. Ribeiro, A. Deffieux and M. Fontanille, Polymer 33 (1992) 4339.10.1016/0032-3861(92)90276-3 ↗
10. M. Y. Keating and E. F. Cord, Thermochimica Acta 243 (1994) 129.10.1016/0040-6031(94)85048-8 ↗
11. F.-C. Chiu, M. Y. Keating and Z. Cheng, Antec 95 Proceedings, p. 1503.
12. P. Starck, Polymer International 40 (1996) 111.10.1002/(SICI)1097-0126(199606)40:2<111::AID-PI541>3.0.CO;2-N ↗
13. M. Keating, I-Hwa. Lee and C. S. Wong, Thermochim-ica Acta 284 (1996) 47.10.1016/0040-6031(96)02891-2 ↗
14. C. Lehtinen, P. Starck and B. LÖfgren, J. Polym. Sci.: Part A: Polym. Chemistry 35 (1997) 307.10.1002/(SICI)1099-0518(19970130)35:2<307::AID-POLA14>3.0.CO;2-T ↗
15. P. Starck, C. Lehtinen and B. LÖfgren, Angew. Makromol. Chemie 249 (1997) 115.10.1002/apmc.1997.052490108 ↗
16. A. J. Mueller, Z. H. Hermandez, M. L. Arnal and J. J. Sanchez, Polymer Bull. 39 (1997) 465.10.1007/s002890050174 ↗
17. M. Y. Keating and I-Hwa. Lee, J. Macromol. Sci-Phys. B38(4) (1999) 379.10.1080/00222349908212439 ↗
18. P. Starck, P. Lehmus and J. SeppÄlÄ,Polym. Eng. Sci. 39(8) (1999) 1445.10.1002/pen.11535 ↗
19. M. L. Arnal, Z. H. Hermandez, M. Matos, J. J. Sanchez, G. Mendez, A. Sanchez and A. MÑller, Antec 98 Proceedings, p. 2007.
20. Y. P. Khanna, E. A. Turi, T. J. Taylor, V. V. Vickroy and R. F. Abbot, Macromolecules 18 (1985) 1302.10.1021/ma00148a045 ↗
21. L. Woo, S. P. Westphal and T. K. Ling,Thermochimica Acta 226 (1993) 83.
22. S. P. Westphal and T. K. Ling Idem., Polym. Eng. Sci. 34 (1994) 420.10.1002/pen.760340507 ↗
23. P. Starck, Eur. Polym. J. 33 (1997) 339.10.1016/S0014-3057(96)00178-4 ↗
24. L. Woo, T. K Ling and S. P. Westphal,Thermochimica Acta 272 (1996) 171.10.1016/0040-6031(95)02621-5 ↗
25. W. Spaleck, F. KÑber, A. Winter, J. Rohrmann, B. Bachmann, M. Antberg, V. Dolle and E. Paulus, Organometallics 13 (1994) 954.10.1021/om00015a032 ↗
26. S. Hosoda, Polymer. 20(5) (1988) 383.
27. E. Kokko, A. Malmberg, P. Lehmus, B. LÖfgren and J. SeppÄlÄ, J. Polym. Sci., Polym. Chem. 38 (2000) 376.10.1002/(SICI)1099-0518(20000115)38:2<376::AID-POLA12>3.0.CO;2-5 ↗
28. G. Balbontin, I. Camurati, T. Dall'occo, A. Finotti, R. Franzese and G. Vecellio, Die Angew. Macromol. Chem. 219 (1994) 139.10.1002/apmc.1994.052190112 ↗
29. J. Minick, A. Moet, A. Hiltner, E. Baer and S. P. Chum, J. Appl. Polym. Sci. 58 (1995) 1371.10.1002/app.1995.070580819 ↗
30. R. G. Matthews, A. P. Unwin, I. M. Ward and G. Capaccio. J. Macromol. Sci.-Phys. B38(1/2) (1999) 123.10.1080/00222349908248110 ↗
31. L. Lu, R. G. Alamo and L. Mandelkern, Macro-molecules 27 (1994) 6571.10.1021/ma00100a048 ↗
32. P. J. Phillips and K. Monar, Antec Proceedings, 97, p. 762.
33. P. Flory, J. Trans. Faraday Soc. 51 (1955) 848.10.1039/tf9555100848 ↗
34. J. D. Hoffman and J. J. Weeks, J. Res. Natl. Bur. Stand. Part A 66 (1962) 13.10.6028/jres.066A.003 ↗
35. R. G. Alamo, E. K. M. Chan, L. Mandelkern and I. G. Voigt-martin, Macromolecules 25(24) (1992) 6381.10.1021/ma00050a001 ↗
36. R. G. Alamo, B. D. Viers and B. D. Mandelkern, ibid. 28 (1995) 3205.10.1021/ma00113a024 ↗
37. P. J. Phillips, M.-H. Kim and K. Monar, Antec 95 Proceedings, p. 1481.
38. M.-H. Kim and P. J. Phillips, Antec Proceedings 96, p. 2205.
39. P. J. Phillips Idem., J. Appl. Polym. Sci. 70 (1998) 1893.10.1002/(SICI)1097-4628(19981205)70:10<1893::AID-APP4>3.0.CO;2-6 ↗
40. B. Crist and P. R. Howard, Macromolecules 32 (1999) 3057.10.1021/ma9816362 ↗
41. B. Crist and F. M. Mirabella, J. Polym. Sci.: Part B: Polym. Physed. 37 (1999).10.1002/(SICI)1099-0488(19991101)37:21<3131::AID-POLB22>3.0.CO;2-M ↗
42. R. G. Alamo and L. Mandelkern, Thermochimica Acta 238 (1994) 155.10.1016/S0040-6031(94)85210-3 ↗
43. S. Bensason, J. Minick, A. Moet, S. Chum, A. Hiltner and E. Baer, J. Polym. Sci.: Part B: Polym. Physed. 34 (1996) 1301.10.1002/(SICI)1099-0488(199605)34:7<1301::AID-POLB12>3.0.CO;2-E ↗
44. L. Nunnery Jr., SPE, Plastics Analysis Division, Newsletter, Vol XXII, number 1, February (1994).