journal article·2000-09

Synthesis and characteristics of near-stoichiometric barium titanate powder by low temperature hydrothermal reaction using titanium tetra(methoxyethoxide)

Kyoungja Woo, Guang J. Choi, Sang J. Sim, Young S. Cho, Young D. Kim

Journal of Materials Science· Volume 35· Issue 18
Publisher page

Abstract

Near-stoichiometric BaTiO3 powders with ultrafine particle size and high crystallinity were prepared by low temperature hydrothermal reaction of Ba(OAc)2 and Ti(OCH2CH2OCH3)4. BaTiO3 particles were synthesized in the spherical, metastable cubic crystalline grains with size distribution between 60–90 nm in diameter. Ultrafine particle size was resulted from the control of the hydration rate and the decrease of Ti-O-Ti cross-linking extent of titanium precursor, Ti(OCH2CH2OCH3)4, which gives electronic, steric, and weakly chelating effect to titanium ion. Increasing the Ba/Ti mole ratio in reactant could not overcome the notorious Ba-deficiency but, improved stoichiometry and produced finer and less agglomerated particles. Interestingly, adding a slight pressure to autogeneous hydrothermal condition (total 4–10 atm) has yielded near-stoichiometric, highly crystalline, and less agglomerated BaTiO3 particles. These particles, which were in metastable cubic form as synthesized, initiated phasetransition to tetragonal form by calcination at below 400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. L. K. Templeton and J. A. Pask, J. Am. Ceram. Soc. 42 (1959) 212.10.1111/j.1151-2916.1959.tb15455.x ↗
2. P. K. Galagher and J. Thompson, ibid. 48 (1965) 644.10.1111/j.1151-2916.1965.tb14697.x ↗
3. A. Beauger, J. C. Moutin and J. C. Niepce, J. Mater. Sci. 18 (1983) 3041.10.1007/BF00700786 ↗
4. H. S. Potdar, S. B. Deshpande and S. K. Date, J. Am. Ceram. Soc. 79 (1996) 2795.10.1111/j.1151-2916.1996.tb09055.x ↗
5. W. S. Calabaugh, E. M. Swiggard and R. Gilchrist, J. Res. Natl. Bur. Stand. 56 (1956) 289.10.6028/jres.056.037 ↗
6. N. G. Eror, H. U. Anderson, “Better Ceramics Through Chemistry, Vol 2” (Materials Research Society, Pittsburgh, 1986) p. 571.
7. J. O. Eckert JR., C. C. Hung-houston, B. L. Gersten, M. M. Lencka and R. E. Riman, J. Am. Ceram. Soc. 79 (1996) 2929.10.1111/j.1151-2916.1996.tb08728.x ↗
8. P. K. Dutta and J. R. Gregg, Chem. Mater. 4 (1992) 843.10.1021/cm00022a019 ↗
9. A. N. Christensen, Acta Chem. Scand. 24 (1970) 2447.10.3891/acta.chem.scand.24-2447 ↗
10. S. S. Flashen, J. Am. Chem. Soc. 77 (1955) 6194.10.1021/ja01628a030 ↗
11. F. Chaput, J. P. BOILOT and A. Beauger, J. Am. Ceram. Soc. 73 (1990) 942.10.1111/j.1151-2916.1990.tb05141.x ↗
12. A. K. Maurie and R. C. Buchanan, Ferroelectrics 74 (1987) 61.10.1080/00150198708014495 ↗
13. R. Vivekanadan, S. Philip and T. R. N. Kutty, Mater. Res. Bull. 22 (1986) 99.10.1016/0025-5408(87)90156-5 ↗
14. W.-H. Shih and Q. Lu, Ferroelectrics 154 (1994) 241.10.1080/00150199408017293 ↗
15. R. K. Sharma, N.-H. Chan and D. M. Smyth, J. Am. Ceram. Soc. 64 (1981) 448.10.1111/j.1151-2916.1981.tb09894.x ↗
16. Y. H. Hu, M. P. Harmer and D. M. Smyth, ibid. 68 (1985) 372.10.1111/j.1151-2916.1985.tb10145.x ↗
17. N. M. Cullinane, S. J. Chard, G. F. Price and B. B. Millward, J. S. C. I., Supplementary Issue (1950) No.1, S38.
18. M. C. Blanco-lopez, B. Rand and F. L. Riley, J. Eur. Cer. Soc. 17 (1997) 281.10.1016/S0955-2219(96)00116-1 ↗
19. Y. Ma, E. Vileno, S. L. Suib and P. K. Dutta, Chem. Mater. 9 (1997) 3023.10.1021/cm970371n ↗
20. G. J. Choi, S. K. Lee, K. Woo, K. K. Koo and Y. S. Cho, ibid. 10 (1998) 4104.10.1021/cm980520h ↗
21. P. Phule and S. H. Risbud, Mat. Sci. Eng. B3 (1989) 241.10.1016/0921-5107(89)90016-0 ↗
22. X. Li and W.-H. Shih, J. Am. Ceram. Soc. 80 (1997) 2844.10.1111/j.1151-2916.1997.tb03202.x ↗
23. E. Shi, C. Xia, W. Zhong, B. Wang and C. Feng, ibid. 80 (1997) 1567.10.1111/j.1151-2916.1997.tb03017.x ↗