Spray forming of ultra-fine SiC particle reinforced 5182 Al-Mg
Source abstract
Abstract
This paper describes the spray forming of SiC particle reinforced Al metal matrix composites (MMCs) with particular emphasis on microstructure characterization of SiC particle distribution. A 5182 Al-Mg alloy was used as matrix material, and SiC particles with a mean diameter of 1.2 μm and 2.0 μm as reinforcement. The reinforcing particle distribution and microstructural characteristics of MMCs were analyzed in the current study using TEM, SEM and optical microscopy. The distribution of SiC particles in the as-spray deposited and hot-extruded conditions was characterized. SEM results indicate that the SiC particles are homogeneously distributed although some clustering was evident in the matrix. TEM and OM examinations show that most of SiC particles are present intergranularly in the Al matrix. EDS analysis indicated that Mg tends to segregate and form oxide phases in the vicinity of SiC particles and that there is no compositional variation of Mg across grain boundaries in the Al matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. T. W. Clyne and P. J. Withers, “An Introduction to Metal Matrix Composites,” (University Press, Cambridge, U.K., 1993) p. 318.10.1017/CBO9780511623080.010 ↗
2. T. C. Willis, Metals and Materials 4 (1988) 485.
3. A. R. Kennedy and T. W. Clyne, in Second International Conference on the Semi-Solid Processing of Alloys and Composites, The Minerals, Metals & Materials Society, Cambridge, MA, USA, 1993.
4. W. H. Hunt Jr, T. M. Osman and J. J. Lowandowski, JOM 45(1) (1993) 30.10.1007/BF03223363 ↗
5. Y. Wu and E. J. Lavernia, J. Metals 43(8) (1991) 16.
6. E. J. Lavernia and Y. Wu, in “Spray Atomization and Deposition” (John Wiley & Sons, New York, 1996).
7. B. Cantor, J. Microscopy 169(2) (1993) 97.10.1111/j.1365-2818.1993.tb03285.x ↗
8. Y. Y. Zhao, P. S. Grant and B. Cantor, ibid. 169(2) (1993) 263.10.1111/j.1365-2818.1993.tb03303.x ↗
9. A. R. E. Singer, Mater. Sci. Eng. 135A (1991) 13.10.1016/0921-5093(91)90528-U ↗
10. J. White, I. R. Hughes, T. C. Willis and R. M. Jordan, Journal de Physique Colloque 48(C3) (1987) 341.
11. K. N. Subramanian, T. R. Bieler and J. P. Lucas, Key Eng. Mater. 104-107 (1995) 175.10.4028/www.scientific.net/KEM.104-107.175 ↗
12. T. G. Nieh and J. Wadsworth, Mater. Sci. Eng. A147 (1991) 129.10.1016/0921-5093(91)90839-F ↗
13. J. Wadsworth and T. G. Nieh, ibid. A166 (1993) 97.10.1016/0921-5093(93)90314-5 ↗
14. N. Ridley and Z. C. Wang, Mater. Sci. Forum 233/234 (1997) 63.10.4028/www.scientific.net/MSF.233-234.63 ↗
15. T. G. Nieh, C. A. Henshall and J. Wadsworth, Scr. Metall. 18 (1984) 1405.10.1016/0036-9748(84)90374-0 ↗
16. S. L. Dai, J. P. Delplanque and E. J. Lavernia, Metall. Mater. Trans. A 29A (1998) 2597.10.1007/s11661-998-0232-9 ↗
17. T. C. Tszeng, Composites Part B 29B (1998) 299.10.1016/S1359-8368(97)00031-0 ↗
18. D. M. Stefanescu and B. K. Dhindaw, “Metals Handbook-Casting,” (ASM International, Metals Park, OH, 1988) p. 142.
19. B. Dutta and M. K. Surappa, Metall. Mater. Trans. A 29A (1998) 1329.10.1007/s11661-998-0259-y ↗
20. D. M. Stefanescu, A. Moitra, S. A. Kacar and B. K. Dhindaw, Metall. Trans. A 21A (1990) 231.10.1007/BF02656440 ↗
21. D. M. Stefanescu, B. K. Dhindaw, S. A. Kacar and A. Moitra, ibid. 19A (1988) 2847.10.1007/BF02645819 ↗
22. T. G. Nieh, T. Imai, J. Wadsworth and S. Kojima, Scr. Metall. Mater. 31 (1994) 1685.10.1016/0956-716X(94)90464-2 ↗
23. W. G. Hutchison and E. J. Palmiere, Mater. Trans. JIM 37 (1996) 330.10.2320/matertrans1989.37.330 ↗
24. T. G. Nieh, A. J. Schwartz and J. Wadsworth, Mater. Sci. Eng. A208 (1996) 30.10.1016/0921-5093(95)10060-1 ↗
25. Y. Wu, PhD dissertation, University of California, Irvine, CA, 1994.
26. P. S. Grant, I. T. H. Chang and B. Cantor, J. Microscopy 177 (1995) 337.10.1111/j.1365-2818.1995.tb03565.x ↗
27. P. Vermaut and P. Ruterana, ibid. 177(3) (1995) 387.10.1111/j.1365-2818.1995.tb03569.x ↗
28. M. Gupta, F. A. Mohamed and E. J. Lavernia, Metall. Trans. A 23A (1991) 831.
29. D. J. Lloyd, Acta Metall. Mater. 39 (1991) 59.10.1016/0956-7151(91)90328-X ↗
30. A. Mortensen and I. Jin, Int. Mater. Rev. 37 (1992) 101.10.1179/imr.1992.37.1.101 ↗
31. E. J. Lavernia, Int. J. Rapid Solidification 5 (1989) 47.
32. E. J. Lavernia, T. S. Srivatsan and R. H. Rangel, Atomization and Sprays 2 (1992) 253.10.1615/AtomizSpr.v2.i3.40 ↗